Compare Products

Our LDHS lid dropper unit is a high speed lid dropper for metal and plastic lids which mounts to all ABA lid press units (i.e. not a stand-alone unit; must be mounted to press). The star-wheel sets are designed to center the lids before the containers pass underneath the press.

Features:

• Adjustable from ½ pint through gallon containers (maximum diameter 7 inches)
• Simple size changeover using ratchet handles, no tools required
• Simple height adjustment via lid press crank handle
• Interchangeable star-wheel sets for lid alignment
• Speeds of 60+ lids per minute
• Standard vertical lid hopper of 24 inch capacity
• Optional 72 inch down-stacker for extra capacity (shown above in far right photo)
• Pneumatic or electronic controls. 

The ABA-RT-60-IN is a 60 inch diameter in feed rotary table. When used as part of an automated line, it allows operators to pre-load large quantities of containers at the start of the line to enhance and speed up the filling process.

Features:

• Container alignment paddles ensure that containers are fed into the conveyor one by one.
• Constructed from stainless steel with a plated circular feed table
• Container contact points are equipped with Teflon runners to prevent marking containers

The ABA-COV-85QTS is a cone style fill head with a 2 inch S-line inlet and a 1.85 inch diameter outlet for filling quart and gallon cans. 

The ABA-COV-85QTSF is a cone style fill head with a 2 inch S-line inlet for filling quart and gallon cans and an additional flush attachment.

Product Specifications:

• 2 inch S-line inlet
• 1.85 inch diameter outlet
• 2.5 inch diameter flush flange

The ABA-COV-85A is a cone style fill head with a 2 inch S-line inlet and a 2.875 inch outlet, which is designed to fill gallon cans.

The ABA-COV-BC-0.75x19 is a diving lance style fill head with a 0.75 inch outer diameter and a 19 inch fill lance which is designed to bottom fill containers. 

The ABA-80-GCV is a one gallon double acting piston pump with gravity check valves.

Product Features:

• Stainless steel and Teflon wetted parts
• Cast end caps, tees, and elbows
• Quick release clamps for ease of maintenance
• Fills from half pint to five quarts in a single cycle

The ABA-PRESS-5GALL-P is a powered lid press primarily designed for closing 5 gallon pails, but will also close 1 gallon pails.

Features:

• Hand crank with chain and sprockets allows for height adjustment
• Stainless steel sheet metal guard covers chain and sprockets
• 5 lead in rollers and 6 powered rollers firmly press lids on

 The ABA-LDHS lid dropper unit is a high speed lid dropper for metal and plastic lids which mounts to all ABA lid press units and can drop lids from 1/2 pint through 1 gallon.

 The ABA-RT-60-IN is a 60 inch diameter in feed rotary table.

The ABA-COV-85QTS is a cone style fill head with a 2 inch S-line inlet and a 1.85 inch diameter outlet for filling quart and gallon cans. 

The ABA-COV-85QTSF is a cone style fill head with a 2 inch S-line inelt for filling quart and gallon cans and an additional flush attachment.

The ABA-COV-85A is a cone style fill head with a 2 inch S-line inlet which is designed to fill gallon cans.

The ABA-COV-BC-0.75x19 is a diving lance style fill head which is designed to bottom fill containers. 

The ABA-80-GCV is a double acting piston pump with gravity check valves.

The ABA-PRESS-5GALL-P is a powered lid press unit.

LDHS

RT-60-IN

COV-85QTS

COV-85QTSF

COV-85A

COV-BC-0.75x19

80-GCV

PRESS-5GALL-P

No

No

No

No

No

No

No

No

No

N/A

N/A

No

N/A

N/A

No

No