Compare Products

Print This Page


	103237B07	ABA-5GALL-03	ABA-5GALL-04	ABA-5GALL-23	ABA-5GALL-71	ABA-COV-87A	609-AEW	LPHSC-5	RT-60-IN	COV-85A		COV-BC-0.75x19	COV-BC-1.25x19	COV-BC-ASSY-SML-11-16	1768-ENBT	PRESS-5GALL-P	COV-85BO	FILL-BFGEA-X	FILL-BFxEA-X	FILL-TFxPS-X	CRIMP-1EA-1C
Description	91102A031,3/8 LOCKWASHER,92146A031,18-8 Stainless Steel Split Lock Washer 3/8” Screw Size, .68” OD, .09” min Thick	128890B,128890spb,E1717700,5 Gallon Teflon Wear Ring,5 galones de tefl”n del anillo de desgaste	128891B,128891,ABA-5GALL-04-RevC,5 Gallon Teflon End Seal,5 galones de tefl”n Seal End	128892C,5 Gallon pump cylinder,5 Gallon cilindro de la bomba	ABA-5GALL-71 Rev F,Check valve cylinder mount, 5 gallon pump, 4 x 10-24 threads.	ABA-COV-87A Rev B,Valve foot, 2.875 Outlet, Gallon cone nozzle, reduced 1/2 diameter,V”lvula de pie, 2,875 Outlet, boquilla de cono galones, redujo 1/2 di”metro	EX Proof (Motor Starter) Motor Manual Starting Switch, Push Button, 3 Phase, NEMA 0, Type 7 & 9 Bolted Enclosures, for use in Class 1, Groups C & D Divisions 1 & 2	The ABA-LPHSC-5 is 5 gallon plastic and metal lid placer with a chute based design. This unit self-centers the lids on the containers as they pass below it. Features: Adjustable release paddles allow for the placement of round, square, and rectangular lids. Automatic lid priming keeps the lid chute full and ready for the next container In feed line stops automatically space incoming containers Low lid stack notifications Automatically stops containers when unit is out of lids.	The ABA-RT-60-IN is a 60 inch diameter in feed rotary table. When used as part of an automated line, it allows operators to pre-load large quantities of containers at the start of the line to enhance and speed up the filling process. Features: Container alignment paddles ensure that containers are fed into the conveyor one by one. Constructed from stainless steel with a plated circular feed table Container contact points are equipped with Teflon runners to prevent marking containers	The ABA-COV-85A is a cone style fill head with a 2 inch S-line inlet and a 2.875 inch outlet, which is designed to fill gallon cans.	Description	The ABA-COV-BC-0.75x19 is a diving lance style fill head with a 0.75 inch outer diameter and a 19 inch fill lance which is designed to bottom fill containers.	The ABA-COV-BC-1.25x19 is a diving probe style fill head with a 1.25 inch outer diameter and a 19 inch lance size. This fill head is designed to bottom fill containers.	The ABA-COV-BC-ASSY-SML-11-16 is a diving probe style fill head which is designed to bottom fill containers. This fill head has an 11/16 inch outer diameter and a 14.5 inch fill lance.	Modular EtherNet-IP bridge module for CompactLogix L4x series	The ABA-PRESS-5GALL-P is a powered lid press primarily designed for closing 5 gallon pails, but will also close 1 gallon pails. Features: Hand crank with chain and sprockets allows for height adjustment Stainless steel sheet metal guard covers chain and sprockets 5 lead in rollers and 6 powered rollers firmly press lids on	ABA-COV-85BO is a cone fill head with 2 inch S-Line inlet featuring air shear or NO2 blanket technology. The forced air helps to blow off or shear a high viscosity product when the fill is completed.	Bottom Fill Gravimetric Electronic Automatic eXplosion-Proof Liquid Filling Machines The ABA-FILL-BF Bottom Fill Series are designed to fill below the level of the liquid to minimize foaming and protect against exposure to static prone products. Submerging the fill nozzle beneath the product as it is filling prevents air in the product, and helps to eliminate foaming and static buildup. This in turn allows the products to be filled more quickly and in a safer manner. On our bottom fill machines, the diving lance style fill head is lowered into the bottom of the container utilizing either a Servo motor or a pneumatic air cylinder. Both methods offer accurate and easily adjustable filling and tracking. Once the fill cycle starts, the fill carraige slowly rises, drawing the fill head(s) up as it goes. As the container is filled with liquid, the head of the fill lance remains submerged under the level of the liquid. These paint filling machines are highly accurate and will increase the efficiency of any plant. Features: Fills restricted opening containers (screw caps) as well as open top containers High accuracy Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails Electronic controls Fully automatic One to six fill stations Explosion proof for C1D1 or C1D2 area	Bottom Fill Volumetric Electronic Automatic eXplosion Proof Liquid Filling Machine The ABA-FILL-BF Bottom Fill Series are designed to fill below the level of the liquid to minimize foaming. Submerging the fill nozzle beneath the product as it is filling prevents air in the product, and helps to eliminate foaming. This in turn allows the products to be filled more quickly. Available with one gallon or five gallon double acting volumetric pumps, each container is filled quickly as the diving lance monitors the product inside the container and submerges the nozzle beneath the liquid surface. The diving lance is lowered into the bottom of the container and is slowly raised as the container is filled with liquid. We offer two methods of raising the fill lance, either with a Servo motor or an air cylinder. Features: Dual mode top fill / bottom fill filling machine Electronic fully adjustable fill head carriage is accurate to within 1/16" inch Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails PLC controls Fully automatic One, two, three or four fill stations Continuously running conveyor	Top Fill Volumetric Pneumatic Semi-Automatic eXplosion proof Liquid Filling Machine The ABA-FILL-TF Top Fill Series are designed to fill open top containers. Our double acting positive displacement piston pumps are faster and have a longer life than single acting pumps as both sides of the piston are flooded with liquid at all times. These paint filling machines are highly efficient and fast fillers, increasing productivity and decreasing downtime. Semi-automatic liquid filling machines require the operator to manually position the container under the fill head and require minimal set-up when changing container size. Features: Fills open top containers One or five gallon double acting pumps Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails Pneumatic controls (can be used in both hazardous and non-hazardous areas) Semi-automatic One or two fill stations Designed for a C1D1 or C1D2 hazardous area	ABA-CRIMP-1EA-1C is a single stage electronic crimper which is mounted on a continuously running conveyor. This lid crimping machine is designed to seal lids onto filled 5 gallon pails.
Short Description	91102A031,3/8 LOCKWASHER,92146A031,18-8 Stainless Steel Split Lock Washer 3/8” Screw Size, .68” OD, .09” min Thick	128890B,128890spb,E1717700,5 Gallon Teflon Wear Ring,5 galones de tefl”n del anillo de desgaste	128891B,128891,ABA-5GALL-04-RevC,5 Gallon Teflon End Seal,5 galones de tefl”n Seal End	128892C,5 Gallon pump cylinder,5 Gallon cilindro de la bomba	ABA-5GALL-71 Rev F,Check valve cylinder mount, 5 gallon pump, 4 x 10-24 threads.	ABA-COV-87A Rev B,Valve foot, 2.875 Outlet, Gallon cone nozzle, reduced 1/2 diameter,V”lvula de pie, 2,875 Outlet, boquilla de cono galones, redujo 1/2 di”metro	EX Proof (Motor Starter) Motor Manual Starting Switch, Push Button, 3 Phase, NEMA 0, Type 7 & 9 Bolted Enclosures, for use in Class 1, Groups C & D Divisions 1 & 2	The ABA-LPHSC-5 is a 5 gallon plastic and metal lid placer with a chute based design.	The ABA-RT-60-IN is a 60 inch diameter in feed rotary table.	The ABA-COV-85A is a cone style fill head with a 2 inch S-line inlet which is designed to fill gallon cans.	Short Description	The ABA-COV-BC-0.75x19 is a diving lance style fill head which is designed to bottom fill containers.	The ABA-COV-BC-1.25x19 is a diving probe style fill head which is designed to bottom fill containers.	The ABA-COV-BC-ASSY-SML-11-16 is a diving probe style fill head which is designed to bottom fill containers.	Modular EtherNet-IP bridge module for CompactLogix L4x series	The ABA-PRESS-5GALL-P is a powered lid press unit.	ABA-COV-85BO is a cone fill head with air shear.	Bottom Fill Gravimetric Electronic Automatic eXplosion-Proof Liquid Filling Machines The ABA-FILL-BFGEA-X is an electronically controlled, automatic, explosion proof net weight filling machine which is designed to bottom fill containers from half pint to 5 gallon pails.	Bottom Fill Volumetric Electronic Automatic eXplosion Proof Liquid Filling Machine The ABA-FILL-BFxEA-X machine is an electronically controlled, fully automatic, explosion proof, volumetric machine which is designed to bottom fill half pint cans through 5 gallon pails.	Top Fill Volumetric Pneumatic Semi-Automatic eXplosion Proof Liquid Filling Machine The ABA-FILL-TFxPS-X machine is a pneumatically controlled, semi-automatic, volumetric machine which is designed to top fill open top containers utilizing one or five gallon double acting pumps and designed for a C1D1 or C1D2 area.	ABA-CRIMP-1EA-1C is a single stage electronic crimper which is mounted on a continuously running conveyor.
SKU	103237B07	ABA-5GALL-03	ABA-5GALL-04	ABA-5GALL-23	ABA-5GALL-71	ABA-COV-87A	609-AEW	LPHSC-5	RT-60-IN	COV-85A	SKU	COV-BC-0.75x19	COV-BC-1.25x19	COV-BC-ASSY-SML-11-16	1768-ENBT	PRESS-5GALL-P	COV-85BO	FILL-BFGEA-X	FILL-BFxEA-X	FILL-TFxPS-X	CRIMP-1EA-1C
Manufacturer	N/A	N/A	N/A	N/A	N/A	N/A	N/A	No	No	No	Manufacturer	No	No	No	N/A	No	No	No	No	No	No
Notes	DateUpdated:8/26/2015 17:44:16, PartUpdatedBy:AnthonyBarber,ManufacturerNumber:540, AltSupplier:Universal 50-710-037, OemMargin:0.00, Location:Red-A-10, Notes:McMaster 92146A031 8.01/100pk,UnUsedItem:0, MinimumStockLevel:100, OnOrder:0, OrderDate:8/13/2015, #ABA-00010780P, Qty=2, PartReOrderQty:200, PartLength:0.00, PartPackQty:100, PartWeight:0.01, PartRegularOrder:1, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:7/9/2015 14:18:29, PartStockCheckedBy:ChristineBarber,	DateUpdated:8/19/2015 11:28:07, PartUpdatedBy:RussellGentry,ManufacturerNumber:434, PartPurchaseInstructions:St Gobain $21/50 $18.42/100 7/28/11 Quote 141247, AltSupplier:Quote DPP 63863 7/25/11 $23.95/50, LeadTime:Nippon Quoted $46.917/09, ThieleSalesPrice:Stock Check 7/16/12, OemMargin:2.00, Location:09-03-01, Notes:St Gobain 17 weeks DPP 4 - 5 weeks 1.00 USE FOR D000B-03-124,StockUsedSince:5/96, UnUsedItem:0, MinimumStockLevel:20, OnOrder:0, OrderDate:8/2/2011, #ABA-00004860P, Qty=100, PartReOrderQty:50, PartLength:0.00, PartPackQty:0, PartWeight:0.12, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/19/2015 11:28:07, PartStockCheckedBy:ChristopherBarber,	DateUpdated:9/1/2015 10:34:57, PartUpdatedBy:AnthonyBarber,ManufacturerNumber:2134, PartPurchaseInstructions:Carolina Seal $9/25 $7.90/50 8.11.14, AltSupplier:Seelye Quote SQ01032364 4/9/13 $15.50/25, LeadTime:8.1.14 RFQ Barry Carolina Seal, OemMargin:2.50, Location:09-03-02,StockUsedSince:5/96, UnUsedItem:0, MinimumStockLevel:15, OnOrder:0, OrderDate:8/13/2015, #ABA-00010790P, Qty=25, PartReOrderQty:25, PartLength:0.00, PartPackQty:0, PartWeight:0.03, PartRegularOrder:1, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/19/2015 11:28:28, PartStockCheckedBy:ChristopherBarber,	DateUpdated:5/8/2015 13:07:37, PartUpdatedBy:KirstyGaus,ManufacturerNumber:373, LeadTime:4/14 Mat $267 Mach $368 Freight $60 = $695, OemMargin:2.00, Location:Overflow Rack 2, Notes:Nippon Quoted Standard S. Am price 7/09 $2,321.65,StockUsedSince:4/3/97, UnUsedItem:0, MinimumStockLevel:5, OnOrder:0, OrderDate:9/11/2014, #ABA-00009619P, Qty=8, PartReOrderQty:8, PartLength:0.00, PartPackQty:0, PartWeight:26.00, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:7/23/2013 15:03:14, PartStockCheckedBy:ChristopherBarber,	DateUpdated:8/19/2015 14:14:32,ManufacturerNumber:377, AltSupplier:Qualitek AAAQ7314 $136/10 12/02/2010 Cheetah $86/10 12.13.10, LeadTime:14WMP 29-355 Short welding ferrule, 3 S-line $9.48, ThieleSalesPrice:Stock Check 7/16/12, OemMargin:0.00, Location:10-06-07, Notes:Griffin $129/10,UnUsedItem:0, MinimumStockLevel:4, OnOrder:0, OrderDate:8/22/2011, #ABA-00004976P, Qty=10, PartReOrderQty:10, PartLength:0.00, PartPackQty:0, PartWeight:3.10, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/19/2015 14:14:32, PartStockCheckedBy:ChristopherBarber,	DateUpdated:8/14/2015 9:34:16, PartUpdatedBy:JacquelineTwigg,ManufacturerNumber:377, AltSupplier:Griffin $59.25/24 9.06 plus $1 for part number, LeadTime:McMaster 92196A246 $9.65/100 10-24 X 7/8 Socket cap screw, ThieleSalesPrice:Stock Check 7/3/12, OemMargin:0.00, Location:02-02-01 & 01A Overflow 02-06, Notes:24 OO Cheetah 7.12.05 ABA-2886 rcd 8.17.05, $58.90/20 $62.50/30 2/08,StockUsedSince:12.29.00, UnUsedItem:0, MinimumStockLevel:20, OnOrder:0, OrderDate:3/11/2015, #ABA-00010231P, Qty=25, PartReOrderQty:24, PartLength:0.00, PartPackQty:0, PartWeight:1.00, PartRegularOrder:1, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/14/2015 9:34:16, PartStockCheckedBy:KirstyGaus,	DateUpdated:8/11/2015 12:41:30, PartUpdatedBy:KirstyGaus,ManufacturerNumber:5, PartPurchaseInstructions:McMc Quote 11960006-00 $599.31, OemMargin:0.00, Notes:Revere 9/05 443.623 3/08 $519.00,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, OrderDate:7/30/2015, #ABA-00010736P, Qty=1, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:6.40, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00,	No	N/A	N/A	Notes	N/A	N/A	N/A	DateAdded:4/23/2015 13:15:13, DateUpdated:4/23/2015 13:21:19, PartUpdatedBy:AnthonyBarber,ManufacturerNumber:5, OemMargin:0.00, Location:N/A,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:0.00, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00,	No	No	No	No	No	No

Compare Products

Features: