Compare Products

91102A031,3/8 LOCKWASHER,92146A031,18-8 Stainless Steel Split Lock Washer 3/8” Screw Size, .68” OD, .09” min Thick

A0333C1-RX(4)-UC-LF-CT ,Five Gallon air motor, 6” diameter x 10” stroke, replaced by ABA-PMTR-06X08R1, new part is fully interchangeable.

128891B,128891,ABA-5GALL-04-RevC,5 Gallon Teflon End Seal,5 galones de tefl”n Seal End

128892C,5 Gallon pump cylinder,5 Gallon cilindro de la bomba

ABA-5GALL-64 Rev A and ABA-5GALL-68 Rev E casting drg.,Tee 5 Gallon pump

ABA-COV-87A Rev B,Valve foot, 2.875 Outlet, Gallon cone nozzle, reduced 1/2 diameter,V”lvula de pie, 2,875 Outlet, boquilla de cono galones, redujo 1/2 di”metro

EX Proof (Motor Starter) Motor Manual Starting Switch, Push Button, 3 Phase, NEMA 0, Type 7 & 9 Bolted Enclosures, for use in Class 1, Groups C & D Divisions 1 & 2

The ABA-PRESS-5NAR is a standard 5 gallon Non-powered Automatic Roller lid press unit.

Features:

• Hand crank with chain and sprockets allows for full height adjustment from pint through 6 gallon pails.
• 32 x 1 inch diameter steel rollers gradually declining steel rollers to firmly press on lids
• Rollers have 1/4 inch thick stainless steel walls and are mounted on 1/4 inch stainless steel shafts using 2 x 1/4 inch double shielded bearings.
• Stainless steel sheet metal guard covers chain and sprockets.
• Press available as washdown capable - fully stainless steel with stainless steel washdown motor. See photo number 2 above (M399)

The ABA-LPHSC-V is a 5 gallon plastic or metal lid placer. This unit has an ergonomically low loading conveyor which is especially beneficial for higher speed applications and loading heavy metal lids. Stacks of lids are conveyed into the lid stacker, raised, and rotated to the escapement chute. This unit self-centers the lids on the containers as they pass below it.

Features:

• 5 gallon plastic and metal lids
• Stack, lift and load assembly
• Rotary transfer assembly
• Vertical stack escapement assembly
• Adjustable release paddles allow for the placement of round, square, and rectangular lids.
• Automatic lid priming keeps the lid chute full and ready for the next container
• In feed line stops automatically space incoming containers
• Low lid stack notifications
• Automatically stops containers when unit is out of lids.

The ABA-RT-60-IN is a 60 inch diameter in feed rotary table. When used as part of an automated line, it allows operators to pre-load large quantities of containers at the start of the line to enhance and speed up the filling process.

Features:

• Container alignment paddles ensure that containers are fed into the conveyor one by one.
• Constructed from stainless steel with a plated circular feed table
• Container contact points are equipped with Teflon runners to prevent marking containers

The ABA-RT-60-OUT is a 60 inch diameter out feed rotary table. When used as part of an automated line, it collates containers as they come off the conveyor and allows for a large quantity of containers to sit until they are ready to be moved forward to the next stage of the process.

Features:

• Constructed from stainless steel with a plated circular feed table
• Container contact points are equipped with Teflon runners to prevent marking containers
• Stainless steel packaging table topped with UHMW plastic allows for easy removal of filled containers 

The ABA-COV-85QTS is a cone style fill head with a 2 inch S-line inlet and a 1.85 inch diameter outlet for filling quart and gallon cans. 

The ABA-2000-GCV is a 5 gallon double acting piston pump assembly with gravity check valves. 

Product Features:

• Cast iron end caps, elbows and tees
• Stroke adjustment handle
• Quick and simple maintenance
• Stainless steel and Teflon wetted parts

The ABA-80-GCV is a one gallon double acting piston pump with gravity check valves.

Product Features:

• Stainless steel and Teflon wetted parts
• Cast end caps, tees, and elbows
• Quick release clamps for ease of maintenance
• Fills from half pint to five quarts in a single cycle

The ABA-99-PCV is a one gallon double acting piston pump with powered check valves. 

Product Features:

• Cast end caps, tees, and elbows
• Stainless steel and Teflon wetted parts
• Quick release clamps for ease of maintenance
• Power check valves eliminate the need for filter tubs
• Can fill from half pint to 5 quarts in a single cycle

The ABA-PLCR-CHUTE is a semi-automatic lid placer chute for both plastic and metal lids. This design provides a good middle ground between a fully automatic lid placer and having an operator manually place lids one by one. This chute allows the operator to pre-load lids and then step away to work on other machine components before it is necessary to replenish the chute.

ABA-COV-85BO is a cone fill head with 2 inch S-Line inlet featuring air shear or NO2 blanket technology. The forced air helps to blow off or shear a high viscosity product when the fill is completed.

Bottom Fill Volumetric Electronic Automatic eXplosion Proof Liquid Filling Machine

The ABA-FILL-BF Bottom Fill Series are designed to fill below the level of the liquid to minimize foaming. Submerging the fill nozzle beneath the product as it is filling prevents air in the product, and helps to eliminate foaming. This in turn allows the products to be filled more quickly. 

Available with one gallon or five gallon double acting volumetric pumps, each container is filled quickly as the diving lance monitors the product inside the container and submerges the nozzle beneath the liquid surface.

The diving lance is lowered into the bottom of the container and is slowly raised as the container is filled with liquid. We offer two methods of raising the fill lance, either with a Servo motor or an air cylinder.

Features:

• Dual mode top fill / bottom fill filling machine
• Electronic fully adjustable fill head carriage is accurate to within 1/16" inch
• Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails
• PLC controls
• Fully automatic
• One, two, three or four fill stations
• Continuously running conveyor

91102A031,3/8 LOCKWASHER,92146A031,18-8 Stainless Steel Split Lock Washer 3/8” Screw Size, .68” OD, .09” min Thick

A0333C1-RX(4)-UC-LF-CT ,Five Gallon air motor, 6” diameter x 10” stroke, replaced by ABA-PMTR-06X08R1, new part is fully interchangeable.

128891B,128891,ABA-5GALL-04-RevC,5 Gallon Teflon End Seal,5 galones de tefl”n Seal End

128892C,5 Gallon pump cylinder,5 Gallon cilindro de la bomba

ABA-5GALL-64 Rev A and ABA-5GALL-68 Rev E casting drg.,Tee 5 Gallon pump

ABA-COV-87A Rev B,Valve foot, 2.875 Outlet, Gallon cone nozzle, reduced 1/2 diameter,V”lvula de pie, 2,875 Outlet, boquilla de cono galones, redujo 1/2 di”metro

EX Proof (Motor Starter) Motor Manual Starting Switch, Push Button, 3 Phase, NEMA 0, Type 7 & 9 Bolted Enclosures, for use in Class 1, Groups C & D Divisions 1 & 2

 The ABA-PRESS-5NAR is a standard 5 gallon Non-powered Automatic Roller lid press unit for pressing lids on pint through 6 gallon pails.

 The ABA-LPHSC-V is a 5 gallon plastic or metal lid placer with a stack, lift, and load assembly and an escapement chute.

 The ABA-RT-60-IN is a 60 inch diameter in feed rotary table.

The ABA-RT-60-OUT is a 60 inch diameter out feed rotary table. 

The ABA-COV-85QTS is a cone style fill head with a 2 inch S-line inlet and a 1.85 inch diameter outlet for filling quart and gallon cans. 

The ABA-2000-GCV is a 5 gallon double acting piston pump assembly with gravity check valves.

The ABA-80-GCV is a double acting piston pump with gravity check valves.

The ABA-99-PCV is a one gallon double acting piston pump with powered check valves. 

The ABA-PLCR-CHUTE is a semi-automatic lid placer chute for both plastic and metal lids.

ABA-COV-85BO is a cone fill head with air shear.

Bottom Fill Volumetric Electronic Automatic eXplosion Proof Liquid Filling Machine

 

The ABA-FILL-BFxEA-X machine is an electronically controlled, fully automatic, explosion proof, volumetric machine which is designed to bottom fill half pint cans through 5 gallon pails. 

103237B07

ABA-5GALL-01

ABA-5GALL-04

ABA-5GALL-23

ABA-5GALL-68

ABA-COV-87A

609-AEW

PRESS-5NAR

LPHSC-V

RT-60-IN

RT-60-OUT

COV-85QTS

2000-GCV

80-GCV

99-PCV

PLCR-CHUTE

COV-85BO

FILL-BFxEA-X

N/A

N/A

N/A

N/A

N/A

N/A

N/A

No

No

No

No

No

No

No

No

No

No

No

DateUpdated:8/26/2015 17:44:16, PartUpdatedBy:AnthonyBarber,ManufacturerNumber:540, AltSupplier:Universal 50-710-037, OemMargin:0.00, Location:Red-A-10, Notes:McMaster 92146A031 8.01/100pk,UnUsedItem:0, MinimumStockLevel:100, OnOrder:0, OrderDate:8/13/2015, #ABA-00010780P, Qty=2, PartReOrderQty:200, PartLength:0.00, PartPackQty:100, PartWeight:0.01, PartRegularOrder:1, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:7/9/2015 14:18:29, PartStockCheckedBy:ChristineBarber,

DateUpdated:11/9/2009 15:36:20,ManufacturerNumber:0, PartPurchaseInstructions:Kaman Quote N408827 9.9.09 $637.09, AltSupplier:Norgren wasTJ10A-X04-AAA98 New A0333C1-RX(4)-UC-LF-CT 6X10 $585.94, LeadTime:Ref serial # 2662591-1 P/N S-A01717C Norgren quote #158767Q 4.7.08, ThieleSalesPrice:Fabco part # 60F1-10A1WA-BRN-CD04K cost ea 434.48
MILLER A4-50B2N-06.00-5.000-0138-N11N-9 $474, OemMargin:0.00,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, OrderDate:4/10/2008, #ABA-00001621P, Qty=1, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:43.00, PartRegularOrder:0, PartRequiresSerialNumber:0,

DateUpdated:9/1/2015 10:34:57, PartUpdatedBy:AnthonyBarber,ManufacturerNumber:2134, PartPurchaseInstructions:Carolina Seal $9/25 $7.90/50 8.11.14, AltSupplier:Seelye Quote SQ01032364 4/9/13 $15.50/25, LeadTime:8.1.14 RFQ Barry Carolina Seal, OemMargin:2.50, Location:09-03-02,StockUsedSince:5/96, UnUsedItem:0, MinimumStockLevel:15, OnOrder:0, OrderDate:8/13/2015, #ABA-00010790P, Qty=25, PartReOrderQty:25, PartLength:0.00, PartPackQty:0, PartWeight:0.03, PartRegularOrder:1, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/19/2015 11:28:28, PartStockCheckedBy:ChristopherBarber,

DateUpdated:5/8/2015 13:07:37, PartUpdatedBy:KirstyGaus,ManufacturerNumber:373, LeadTime:4/14 Mat $267 Mach $368 Freight $60 = $695, OemMargin:2.00, Location:Overflow Rack 2, Notes:Nippon Quoted Standard S. Am price 7/09 $2,321.65,StockUsedSince:4/3/97, UnUsedItem:0, MinimumStockLevel:5, OnOrder:0, OrderDate:9/11/2014, #ABA-00009619P, Qty=8, PartReOrderQty:8, PartLength:0.00, PartPackQty:0, PartWeight:26.00, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:7/23/2013 15:03:14, PartStockCheckedBy:ChristopherBarber,

DateUpdated:8/5/2015 13:31:19, PartUpdatedBy:KirstyGaus,ManufacturerNumber:393, AltSupplier:wisc. $4,812.50 tool $271.49/25 mach $70.60 tool $2,100, ABA-5GALL-64 Casting, LeadTime:9/14 $459.20 plus surcharge $10.16 total $469.36 7/15 $3.665 surcharge, ThieleSalesPrice:3/06 $396.34 plus surcharges final price in 2006 with freight is $427.79, OemMargin:5.00, Location:Overflow rack 4 shelf 2 right, Notes:1.11.10 $445.83/10 or 12 $414.27/22 Surchage 1.74# = #18.10 $463.93 $432.37,UnUsedItem:0, MinimumStockLevel:2, OnOrder:0, OrderDate:5/28/2015, #ABA-00010473P, Qty=16, PartReOrderQty:6, PartLength:0.00, PartPackQty:0, PartWeight:8.40, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:9/11/2014 15:44:56, PartStockCheckedBy:KirstyGaus,

DateUpdated:8/14/2015 9:34:16, PartUpdatedBy:JacquelineTwigg,ManufacturerNumber:377, AltSupplier:Griffin $59.25/24 9.06 plus $1 for part number, LeadTime:McMaster 92196A246 $9.65/100 10-24 X 7/8 Socket cap screw, ThieleSalesPrice:Stock Check 7/3/12, OemMargin:0.00, Location:02-02-01 & 01A Overflow 02-06, Notes:24 OO Cheetah 7.12.05 ABA-2886 rcd 8.17.05, $58.90/20 $62.50/30 2/08,StockUsedSince:12.29.00, UnUsedItem:0, MinimumStockLevel:20, OnOrder:0, OrderDate:3/11/2015, #ABA-00010231P, Qty=25, PartReOrderQty:24, PartLength:0.00, PartPackQty:0, PartWeight:1.00, PartRegularOrder:1, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/14/2015 9:34:16, PartStockCheckedBy:KirstyGaus,

DateUpdated:8/11/2015 12:41:30, PartUpdatedBy:KirstyGaus,ManufacturerNumber:5, PartPurchaseInstructions:McMc Quote 11960006-00 $599.31, OemMargin:0.00, Notes:Revere 9/05 443.623 3/08 $519.00,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, OrderDate:7/30/2015, #ABA-00010736P, Qty=1, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:6.40, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00,

No

No

N/A

N/A

N/A

No

No

No

No

No

No