Compare Products

Print This Page


	609-AEW	94355A602	FILL-BFGEA	PRESS-5NAR	LPHSC-5	91352A157	COV-85QTS	COV-BC-0.75x19	PLCR-CHUTE
Description	EX Proof (Motor Starter) Motor Manual Starting Switch, Push Button, 3 Phase, NEMA 0, Type 7 & 9 Bolted Enclosures, for use in Class 1, Groups C & D Divisions 1 & 2	18-8 SS Flat Point Socket Set Screw 1/4-28 Thread, 1/4 Length	Bottom Fill Gravimetric Electronic Automatic Liquid Filling Machines The ABA-FILL-BF Bottom Fill Series are designed to fill below the level of the liquid to minimize foaming. Submerging the fill nozzle beneath the product as it is filling prevents air in the product, and helps to eliminate foaming. This in turn allows the products to be filled more quickly. The diving lance is lowered into the bottom of the container and is slowly raised as the container is filled with liquid, continually keeping the fill lance submerged. We offer two methods of raising the fill lance, either with a servo motor or an air cylinder. Features: Fills restricted opening containers (screw caps) as well as open top containers High accuracy Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails Electronic controls Fully automatic One, two. three or four fill stations Available explosion proof rating (Class 1, Division 1 or Class 1, Division 2)	The ABA-PRESS-5NAR is a standard 5 gallon Non-powered Automatic Roller lid press unit. Features: Hand crank with chain and sprockets allows for full height adjustment from pint through 6 gallon pails. 32 x 1 inch diameter steel rollers gradually declining steel rollers to firmly press on lids Rollers have 1/4 inch thick stainless steel walls and are mounted on 1/4 inch stainless steel shafts using 2 x 1/4 inch double shielded bearings. Stainless steel sheet metal guard covers chain and sprockets. Press available as washdown capable - fully stainless steel with stainless steel washdown motor. See photo number 2 above (M399)	The ABA-LPHSC-5 is 5 gallon plastic and metal lid placer with a chute based design. This unit self-centers the lids on the containers as they pass below it. Features: Adjustable release paddles allow for the placement of round, square, and rectangular lids. Automatic lid priming keeps the lid chute full and ready for the next container In feed line stops automatically space incoming containers Low lid stack notifications Automatically stops containers when unit is out of lids.	Button-Head Socket Cap Screw, M8 Size, 35mm Long, Zinc Plated, fully threaded	The ABA-COV-85QTS is a cone style fill head with a 2 inch S-line inlet and a 1.85 inch diameter outlet for filling quart and gallon cans.	The ABA-COV-BC-0.75x19 is a diving lance style fill head with a 0.75 inch outer diameter and a 19 inch fill lance which is designed to bottom fill containers.	The ABA-PLCR-CHUTE is a semi-automatic lid placer chute for both plastic and metal lids. This design provides a good middle ground between a fully automatic lid placer and having an operator manually place lids one by one. This chute allows the operator to pre-load lids and then step away to work on other machine components before it is necessary to replenish the chute.
Short Description	EX Proof (Motor Starter) Motor Manual Starting Switch, Push Button, 3 Phase, NEMA 0, Type 7 & 9 Bolted Enclosures, for use in Class 1, Groups C & D Divisions 1 & 2	18-8 SS Flat Point Socket Set Screw 1/4-28 Thread, 1/4 Length	Bottom Fill Gravimetric Electronic Automatic Liquid Filling Machines The ABA-FILL-BFGEA is an electronically controlled, automatic, net weight filling machine which is designed to bottom fill containers from half pint to 5 gallon pails.	The ABA-PRESS-5NAR is a standard 5 gallon Non-powered Automatic Roller lid press unit for pressing lids on pint through 6 gallon pails.	The ABA-LPHSC-5 is a 5 gallon plastic and metal lid placer with a chute based design.	Button-Head Socket Cap Screw, M8 Size, 35mm Long, Zinc Plated, fully threaded	The ABA-COV-85QTS is a cone style fill head with a 2 inch S-line inlet and a 1.85 inch diameter outlet for filling quart and gallon cans.	The ABA-COV-BC-0.75x19 is a diving lance style fill head which is designed to bottom fill containers.	The ABA-PLCR-CHUTE is a semi-automatic lid placer chute for both plastic and metal lids.
SKU	609-AEW	94355A602	FILL-BFGEA	PRESS-5NAR	LPHSC-5	91352A157	COV-85QTS	COV-BC-0.75x19	PLCR-CHUTE
Manufacturer	N/A	N/A	No	No	No	N/A	No	No	No
Notes	DateUpdated:8/11/2015 12:41:30, PartUpdatedBy:KirstyGaus,ManufacturerNumber:5, PartPurchaseInstructions:McMc Quote 11960006-00 $599.31, OemMargin:0.00, Notes:Revere 9/05 443.623 3/08 $519.00,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, OrderDate:7/30/2015, #ABA-00010736P, Qty=1, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:6.40, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00,	DateAdded:4/21/2009 13:43:09, DateUpdated:7/7/2015 14:52:11, PartUpdatedBy:JacquelineTwigg,ManufacturerNumber:540, ThieleSalesPrice:Stock Check 6/24/13, OemMargin:0.00, Location:Blue-C-660,UnUsedItem:0, MinimumStockLevel:2, OnOrder:0, OrderDate:4/21/2009, #ABA-00002556P, Qty=1, PartReOrderQty:0, PartLength:0.00, PartPackQty:10, PartWeight:0.00, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:7/7/2015 14:52:11, PartStockCheckedBy:ChristineBarber,	No	No	No	DateAdded:2/5/2014 11:36:56, DateUpdated:8/7/2015 14:15:37, PartUpdatedBy:RussellGentry,ManufacturerNumber:540, OemMargin:0.00, Location:Red-A-1192,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, PartReOrderQty:0, PartLength:0.00, PartPackQty:10, PartWeight:0.06, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:7/14/2015 15:00:51, PartStockCheckedBy:ChristineBarber,	N/A	N/A	No