Compare Products

91102A031,3/8 LOCKWASHER,92146A031,18-8 Stainless Steel Split Lock Washer 3/8” Screw Size, .68” OD, .09” min Thick

128891B,128891,ABA-5GALL-04-RevC,5 Gallon Teflon End Seal,5 galones de tefl”n Seal End

ABA-5GALL-64 Rev A and ABA-5GALL-68 Rev E casting drg.,Tee 5 Gallon pump

ABA-5GALL-71 Rev F,Check valve cylinder mount, 5 gallon pump, 4 x 10-24 threads.

5967K81,UCLF202-10,Cast Iron Flange-Mounted Steel Ball Bearing 4 Bolt Square Flange for 5/8” Shaft Dia, 3” Base L, for starwheel

129315C,F1AU-10A1W-AU00,Air motor for 5 gallon pump, A Series, Front Flange Mount, 6 diameter x 10 inch stroke, Std rod 1.275 Rod Dia, Style 1 (1-14 Male Thds) 1/2 NPTF Port, no cushions, 1A-Rod Ext 4.0, BC Bumper Cap with SS Tie rods and SS Rod, 1/2-20 thread tie rods

18-8 SS Flat Point Socket Set Screw 1/4-28 Thread, 1/4 Length

Standard Crimp-on Ring Terminal Nylon Insulated, 16-14 Wire Gauge, #8 Stud, 600V

Relay Socket, 4 PDT, General Purpose, use with Relay 700-HC24Z24-4

Mounting Strap for Pneumatic Position Transmitter, P/N 33.21.326 8 - 100mm

Plastic-Head Thumb Screw Black Knurled Head, 1/4-20 Thread, 1/2 Length

 

Bottom Fill Volumetric Electronic Automatic Liquid Filling Machine

The ABA-FILL-BF Bottom Fill Series are designed to fill below the level of the liquid to minimize foaming. Submerging the fill nozzle beneath the product as it is filling prevents air in the product, and helps to eliminate foaming. This in turn allows the products to be filled more quickly. 

Available with one gallon or five gallon double acting volumetric pumps, each container is filled quickly as the diving lance monitors the product inside the container and submerges the nozzle beneath the liquid surface.

The diving lance is lowered into the bottom of the container and is slowly raised as the container is filled with liquid. We offer two methods of raising the fill lance, either with a Servo motor or an air cylinder.

Features:

• Dual mode top fill / bottom fill filling machine
• Electronic fully adjustable fill head carriage is accurate to within 1/16" inch
• Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails
• PLC controls
• Fully automatic
• One, two, three or four fill stations
• Continuously running conveyor
• Available explosion proof rating (Class 1, Division 1 or Class 1, Division 2)

The ABA-PRESS-1NAR is a standard 1 gallon Non-powered Automatic Roller lid press unit.

Features:

• Hand crank with chain and sprockets allows for full height adjustment from half pint through 1 gallon (5 liter) containers.
• 19 x 1 inch diameter gradually declining steel rollers to firmly press on lids.
• Rollers have 1/4 inch thick steel walls and are mounted on 1/4 inch stainless steel shafts using 2 x 1/4 inch double shielded bearings.
• Stainless steel sheet metal guard covers chain and sprockets.

The ABA-LPHSC-5 is 5 gallon plastic and metal lid placer with a chute based design. This unit self-centers the lids on the containers as they pass below it.

Features:

• Adjustable release paddles allow for the placement of round, square, and rectangular lids.
• Automatic lid priming keeps the lid chute full and ready for the next container
• In feed line stops automatically space incoming containers
• Low lid stack notifications
• Automatically stops containers when unit is out of lids.

Our LDHS lid dropper unit is a high speed lid dropper for metal and plastic lids which mounts to all ABA lid press units (i.e. not a stand-alone unit; must be mounted to press). The star-wheel sets are designed to center the lids before the containers pass underneath the press.

Features:

• Adjustable from ½ pint through gallon containers (maximum diameter 7 inches)
• Simple size changeover using ratchet handles, no tools required
• Simple height adjustment via lid press crank handle
• Interchangeable star-wheel sets for lid alignment
• Speeds of 60+ lids per minute
• Standard vertical lid hopper of 24 inch capacity
• Optional 72 inch down-stacker for extra capacity (shown above in far right photo)
• Pneumatic or electronic controls. 

The ABA-RT-60-IN is a 60 inch diameter in feed rotary table. When used as part of an automated line, it allows operators to pre-load large quantities of containers at the start of the line to enhance and speed up the filling process.

Features:

• Container alignment paddles ensure that containers are fed into the conveyor one by one.
• Constructed from stainless steel with a plated circular feed table
• Container contact points are equipped with Teflon runners to prevent marking containers

The ABA-RT-60-OUT is a 60 inch diameter out feed rotary table. When used as part of an automated line, it collates containers as they come off the conveyor and allows for a large quantity of containers to sit until they are ready to be moved forward to the next stage of the process.

Features:

• Constructed from stainless steel with a plated circular feed table
• Container contact points are equipped with Teflon runners to prevent marking containers
• Stainless steel packaging table topped with UHMW plastic allows for easy removal of filled containers 

The ABA-COV-85QTS is a cone style fill head with a 2 inch S-line inlet and a 1.85 inch diameter outlet for filling quart and gallon cans. 

The ABA-COV-85QTSF is a cone style fill head with a 2 inch S-line inlet for filling quart and gallon cans and an additional flush attachment.

Product Specifications:

• 2 inch S-line inlet
• 1.85 inch diameter outlet
• 2.5 inch diameter flush flange

The ABA-COV-BC-1.25x19 is a diving probe style fill head with a 1.25 inch outer diameter and a 19 inch lance size. This fill head is designed to bottom fill containers.

The ABA-2000-GCV is a 5 gallon double acting piston pump assembly with gravity check valves. 

Product Features:

• Cast iron end caps, elbows and tees
• Stroke adjustment handle
• Quick and simple maintenance
• Stainless steel and Teflon wetted parts

The ABA-99-PCV is a one gallon double acting piston pump with powered check valves. 

Product Features:

• Cast end caps, tees, and elbows
• Stainless steel and Teflon wetted parts
• Quick release clamps for ease of maintenance
• Power check valves eliminate the need for filter tubs
• Can fill from half pint to 5 quarts in a single cycle

The ABA-TFGES-DRUM is an electronically controlled, top fill, net weight, semi-automatic filling machine designed to fill drums. Simple clean up with only two ball valves and fill head as wetted parts.

Features:

• Fills open top containers
• High accuracy
• Electronic controls
• Semi-automatic

The ABA-PRESS-5GALL-P is a powered lid press primarily designed for closing 5 gallon pails, but will also close 1 gallon pails.

Features:

• Hand crank with chain and sprockets allows for height adjustment
• Stainless steel sheet metal guard covers chain and sprockets
• 5 lead in rollers and 6 powered rollers firmly press lids on

ABA-COV-85BO is a cone fill head with 2 inch S-Line inlet featuring air shear or NO2 blanket technology. The forced air helps to blow off or shear a high viscosity product when the fill is completed.

ABA-CRIMP-1EA-1C is a single stage electronic crimper which is mounted on a continuously running conveyor. This lid crimping machine is designed to seal lids onto filled 5 gallon pails.

91102A031,3/8 LOCKWASHER,92146A031,18-8 Stainless Steel Split Lock Washer 3/8” Screw Size, .68” OD, .09” min Thick

128891B,128891,ABA-5GALL-04-RevC,5 Gallon Teflon End Seal,5 galones de tefl”n Seal End

ABA-5GALL-64 Rev A and ABA-5GALL-68 Rev E casting drg.,Tee 5 Gallon pump

ABA-5GALL-71 Rev F,Check valve cylinder mount, 5 gallon pump, 4 x 10-24 threads.

5967K81,UCLF202-10,Cast Iron Flange-Mounted Steel Ball Bearing 4 Bolt Square Flange for 5/8” Shaft Dia, 3” Base L, for starwheel

129315C,F1AU-10A1W-AU00,Air motor for 5 gallon pump, A Series, Front Flange Mount, 6 diameter x 10 inch stroke, Std rod 1.275 Rod Dia, Style 1 (1-14 Male Thds) 1/2 NPTF Port, no cushions, 1A-Rod Ext 4.0, BC Bumper Cap with SS Tie rods and SS Rod, 1/2-20 thread tie rods

18-8 SS Flat Point Socket Set Screw 1/4-28 Thread, 1/4 Length

Standard Crimp-on Ring Terminal Nylon Insulated, 16-14 Wire Gauge, #8 Stud, 600V

Relay Socket, 4 PDT, General Purpose, use with Relay 700-HC24Z24-4

Mounting Strap for Pneumatic Position Transmitter, P/N 33.21.326 8 - 100mm

Plastic-Head Thumb Screw Black Knurled Head, 1/4-20 Thread, 1/2 Length

Bottom Fill Volumetric Electronic Automatic Liquid Filling Machine

The ABA-FILL-BFxEA machine is an electronically controlled, fully automatic, volumetric machine which is designed to bottom fill half pint cans through 5 gallon pails. 

 

The ABA-PRESS-1NAR is a standard 1 gallon Non-powered Automatic Roller lid press unit for pressing lids on half pint through 1 gallon containers.

 The ABA-LPHSC-5 is a 5 gallon plastic and metal lid placer with a chute based design.

 The ABA-LDHS lid dropper unit is a high speed lid dropper for metal and plastic lids which mounts to all ABA lid press units and can drop lids from 1/2 pint through 1 gallon.

 The ABA-RT-60-IN is a 60 inch diameter in feed rotary table.

The ABA-RT-60-OUT is a 60 inch diameter out feed rotary table. 

The ABA-COV-85QTS is a cone style fill head with a 2 inch S-line inlet and a 1.85 inch diameter outlet for filling quart and gallon cans. 

The ABA-COV-85QTSF is a cone style fill head with a 2 inch S-line inelt for filling quart and gallon cans and an additional flush attachment.

The ABA-COV-BC-1.25x19 is a diving probe style fill head which is designed to bottom fill containers.

The ABA-2000-GCV is a 5 gallon double acting piston pump assembly with gravity check valves.

The ABA-99-PCV is a one gallon double acting piston pump with powered check valves. 

The ABA-TFGES-DRUM is an electronically controlled, top fill, net weight, semi-automatic filling machine designed to fill drums.

The ABA-PRESS-5GALL-P is a powered lid press unit.

ABA-COV-85BO is a cone fill head with air shear.

ABA-CRIMP-1EA-1C is a single stage electronic crimper which is mounted on a continuously running conveyor.

103237B07

ABA-5GALL-04

ABA-5GALL-68

ABA-5GALL-71

5967K51

ABA-PMTR-06X08R1

94355A602

7113K454

700-HN128

33.006

91185A661

FILL-BFxEA

PRESS-1NAR

LPHSC-5

LDHS

RT-60-IN

RT-60-OUT

COV-85QTS

COV-85QTSF

COV-BC-1.25x19

2000-GCV

99-PCV

TFGES-DRUM

PRESS-5GALL-P

COV-85BO

CRIMP-1EA-1C

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

No

No

No

No

No

No

No

No

No

No

No

No

No

No

No

DateUpdated:8/26/2015 17:44:16, PartUpdatedBy:AnthonyBarber,ManufacturerNumber:540, AltSupplier:Universal 50-710-037, OemMargin:0.00, Location:Red-A-10, Notes:McMaster 92146A031 8.01/100pk,UnUsedItem:0, MinimumStockLevel:100, OnOrder:0, OrderDate:8/13/2015, #ABA-00010780P, Qty=2, PartReOrderQty:200, PartLength:0.00, PartPackQty:100, PartWeight:0.01, PartRegularOrder:1, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:7/9/2015 14:18:29, PartStockCheckedBy:ChristineBarber,

DateUpdated:9/1/2015 10:34:57, PartUpdatedBy:AnthonyBarber,ManufacturerNumber:2134, PartPurchaseInstructions:Carolina Seal $9/25 $7.90/50 8.11.14, AltSupplier:Seelye Quote SQ01032364 4/9/13 $15.50/25, LeadTime:8.1.14 RFQ Barry Carolina Seal, OemMargin:2.50, Location:09-03-02,StockUsedSince:5/96, UnUsedItem:0, MinimumStockLevel:15, OnOrder:0, OrderDate:8/13/2015, #ABA-00010790P, Qty=25, PartReOrderQty:25, PartLength:0.00, PartPackQty:0, PartWeight:0.03, PartRegularOrder:1, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/19/2015 11:28:28, PartStockCheckedBy:ChristopherBarber,

DateUpdated:8/5/2015 13:31:19, PartUpdatedBy:KirstyGaus,ManufacturerNumber:393, AltSupplier:wisc. $4,812.50 tool $271.49/25 mach $70.60 tool $2,100, ABA-5GALL-64 Casting, LeadTime:9/14 $459.20 plus surcharge $10.16 total $469.36 7/15 $3.665 surcharge, ThieleSalesPrice:3/06 $396.34 plus surcharges final price in 2006 with freight is $427.79, OemMargin:5.00, Location:Overflow rack 4 shelf 2 right, Notes:1.11.10 $445.83/10 or 12 $414.27/22 Surchage 1.74# = #18.10 $463.93 $432.37,UnUsedItem:0, MinimumStockLevel:2, OnOrder:0, OrderDate:5/28/2015, #ABA-00010473P, Qty=16, PartReOrderQty:6, PartLength:0.00, PartPackQty:0, PartWeight:8.40, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:9/11/2014 15:44:56, PartStockCheckedBy:KirstyGaus,

DateUpdated:8/19/2015 14:14:32,ManufacturerNumber:377, AltSupplier:Qualitek AAAQ7314 $136/10 12/02/2010 Cheetah $86/10 12.13.10, LeadTime:14WMP 29-355 Short welding ferrule, 3 S-line $9.48, ThieleSalesPrice:Stock Check 7/16/12, OemMargin:0.00, Location:10-06-07, Notes:Griffin $129/10,UnUsedItem:0, MinimumStockLevel:4, OnOrder:0, OrderDate:8/22/2011, #ABA-00004976P, Qty=10, PartReOrderQty:10, PartLength:0.00, PartPackQty:0, PartWeight:3.10, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/19/2015 14:14:32, PartStockCheckedBy:ChristopherBarber,

DateUpdated:9/3/2014 15:29:00, PartUpdatedBy:SimonWalker,ManufacturerNumber:1683, AltSupplier:5967K81 Mc Master $31.63 Weimer 7/11 alternative is $19.87, OemMargin:0.00, Location:17-01-00, Notes:Kaman Quote M276850 25.29 each,UnUsedItem:0, MinimumStockLevel:2, OnOrder:0, OrderDate:7/31/2013, #ABA-00007751P, Qty=2, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:0.93, PartRegularOrder:1, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:9/3/2014 15:29:00, PartStockCheckedBy:KirstyGaus,

DateAdded:6/13/2008 13:03:50, DateUpdated:5/28/2015 10:49:00, PartUpdatedBy:KirstyGaus,ManufacturerNumber:1798, AltSupplier:see B08-U05-10A for SS tie rods only, LeadTime:F1AU-10A1W-AU00 SS tie rods and flange $488.59 ABA-2000-MF1-FLANGE, ThieleSalesPrice:Seal kit P/N ABA-PMTR-06X08R1-SKT, OemMargin:2.00, Location:Overflow Rack 2-1, Notes:Numatics F1AU-10A1W-A1C0 $395.62 11/09 c-Steel tie rods and flange,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, OrderDate:5/19/2015, #ABA-00010446P, Qty=1, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:41.00, PartRegularOrder:1, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:7/23/2013 15:49:52, PartStockCheckedBy:ChristopherBarber,

DateAdded:4/21/2009 13:43:09, DateUpdated:7/7/2015 14:52:11, PartUpdatedBy:JacquelineTwigg,ManufacturerNumber:540, ThieleSalesPrice:Stock Check 6/24/13, OemMargin:0.00, Location:Blue-C-660,UnUsedItem:0, MinimumStockLevel:2, OnOrder:0, OrderDate:4/21/2009, #ABA-00002556P, Qty=1, PartReOrderQty:0, PartLength:0.00, PartPackQty:10, PartWeight:0.00, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:7/7/2015 14:52:11, PartStockCheckedBy:ChristineBarber,

DateAdded:7/9/2010 8:49:04, DateUpdated:3/12/2015 13:11:21, PartUpdatedBy:KirstyGaus,ManufacturerNumber:540, OemMargin:0.00, Location:Ferrules overflow 19-06,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, OrderDate:3/9/2015, #ABA-00010200P, Qty=1, PartReOrderQty:0, PartLength:0.00, PartPackQty:50, PartWeight:0.00, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00,

DateAdded:1/23/2012 8:28:46, DateUpdated:8/21/2015 14:15:48, PartUpdatedBy:KirstyGaus,ManufacturerNumber:5, OemMargin:0.00, Location:21-03-05, Notes:McMc Quote 11842767-00 01/12 $9.22,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, OrderDate:9/17/2014, #ABA-00009656P, Qty=5, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:0.09, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/21/2015 14:15:48, PartStockCheckedBy:ChristopherBarber,

DateAdded:5/18/2012 10:28:37, DateUpdated:8/19/2015 10:38:33,ManufacturerNumber:1969, OemMargin:0.00, Location:08-06-16,UnUsedItem:0, MinimumStockLevel:5, OnOrder:0, OrderDate:4/8/2013, #ABA-00007318P, Qty=4, PartReOrderQty:4, PartLength:0.00, PartPackQty:0, PartWeight:0.05, PartRegularOrder:1, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/19/2015 10:38:33, PartStockCheckedBy:ChristopherBarber,

DateAdded:3/13/2013 13:11:35, DateUpdated:8/7/2015 13:56:29, PartUpdatedBy:KirstyGaus,ManufacturerNumber:540, ThieleSalesPrice:Stock Check 6/24/13, OemMargin:0.00, Location:Blue-C-125,UnUsedItem:0, MinimumStockLevel:8, OnOrder:0, OrderDate:7/8/2015, #ABA-00010590P, Qty=2, PartReOrderQty:10, PartLength:0.00, PartPackQty:10, PartWeight:0.01, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:7/7/2015 13:58:32, PartStockCheckedBy:ChristineBarber,

No

No

No

No

N/A

N/A

N/A

No

N/A

No

No

No

No

No

No