Compare Products

Print This Page


	ABA-5GALL-01	ABA-5GALL-68	ABA-5GALL-71	ABA-COV-87A	609-AEW	5967K51	4273T81	94355A602	FILL-TFxEA	FILL-TFxPS		FILL-BFxEA	FILL-TFGEA	FILL-BFGEA	FILL-BFGES	PRESS-1NAR	ABA-SCALE-0082	COV-85QTS	FILL-BFGEA-X	FILL-BFxEA-X	FILL-TFxPS-X
Description	A0333C1-RX(4)-UC-LF-CT ,Five Gallon air motor, 6” diameter x 10” stroke, replaced by ABA-PMTR-06X08R1, new part is fully interchangeable.	ABA-5GALL-64 Rev A and ABA-5GALL-68 Rev E casting drg.,Tee 5 Gallon pump	ABA-5GALL-71 Rev F,Check valve cylinder mount, 5 gallon pump, 4 x 10-24 threads.	ABA-COV-87A Rev B,Valve foot, 2.875 Outlet, Gallon cone nozzle, reduced 1/2 diameter,V”lvula de pie, 2,875 Outlet, boquilla de cono galones, redujo 1/2 di”metro	EX Proof (Motor Starter) Motor Manual Starting Switch, Push Button, 3 Phase, NEMA 0, Type 7 & 9 Bolted Enclosures, for use in Class 1, Groups C & D Divisions 1 & 2	5967K81,UCLF202-10,Cast Iron Flange-Mounted Steel Ball Bearing 4 Bolt Square Flange for 5/8” Shaft Dia, 3” Base L, for starwheel	Metric Phenolic Six-Lobe Knob, M6 X 1.0 Threaded Thru Hole, 40MM Dia	18-8 SS Flat Point Socket Set Screw 1/4-28 Thread, 1/4 Length	Top Fill Volumetric Electronic Automatic Liquid Filling Machines The ABA-FILL-TF Top Fill Series are designed to fill open top containers. Our double acting positive displacement piston pumps are faster and have a longer life than single acting pumps as both sides of the piston are flooded with liquid at all times. Automatic machines require minimal operator intervention and allows for faster CPM (Containers Per Minute) count. Features: Fills open top containers One or five gallon double acting pumps Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails PLC controls Fully automatic One, two, three or four fill stations Available explosion proof rating (Class 1, Division 1 or Class 1, Division 2)	Top Fill Volumetric Pneumatic Semi-Automatic Liquid Filling Machine The ABA-FILL-TF Top Fill Series are designed to fill open top containers. Our double acting positive displacement piston pumps are faster and have a longer life than single acting pumps as both sides of the piston are flooded with liquid at all times. Semi-automatic liquid filling machines require the operator to manually position the container under the fill head and require minimal set-up when changing container size. Features: Fills open top containers One or five gallon double acting pumps Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails Pneumatic controls (can be used in both hazardous and non-hazardous areas) Semi-automatic One or two fill stations	Description	Bottom Fill Volumetric Electronic Automatic Liquid Filling Machine The ABA-FILL-BF Bottom Fill Series are designed to fill below the level of the liquid to minimize foaming. Submerging the fill nozzle beneath the product as it is filling prevents air in the product, and helps to eliminate foaming. This in turn allows the products to be filled more quickly. Available with one gallon or five gallon double acting volumetric pumps, each container is filled quickly as the diving lance monitors the product inside the container and submerges the nozzle beneath the liquid surface. The diving lance is lowered into the bottom of the container and is slowly raised as the container is filled with liquid. We offer two methods of raising the fill lance, either with a Servo motor or an air cylinder. Features: Dual mode top fill / bottom fill filling machine Electronic fully adjustable fill head carriage is accurate to within 1/16" inch Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails PLC controls Fully automatic One, two, three or four fill stations Continuously running conveyor Available explosion proof rating (Class 1, Division 1 or Class 1, Division 2)	Top Fill Gravimetric Electronic Automatic Liquid Filling Machines The ABA-FILL-TF Top Fill Series are designed to fill open top containers from half pint through 5 gallon. Simple clean-up with only two ball valves and a fill head as wetted parts. Features: Fills open top containers High accuracy Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails PLC controls Fully automatic One, two, three or four fill stations Continuously running conveyor Available explosion proof rating (Class 1, Division 1 or Class 1, Division 2)	Bottom Fill Gravimetric Electronic Automatic Liquid Filling Machines The ABA-FILL-BF Bottom Fill Series are designed to fill below the level of the liquid to minimize foaming. Submerging the fill nozzle beneath the product as it is filling prevents air in the product, and helps to eliminate foaming. This in turn allows the products to be filled more quickly. The diving lance is lowered into the bottom of the container and is slowly raised as the container is filled with liquid, continually keeping the fill lance submerged. We offer two methods of raising the fill lance, either with a servo motor or an air cylinder. Features: Fills restricted opening containers (screw caps) as well as open top containers High accuracy Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails Electronic controls Fully automatic One, two. three or four fill stations Available explosion proof rating (Class 1, Division 1 or Class 1, Division 2)	Bottom Fill Gravimetric Electronic Semi-Automatic Liquid Filling Machines The ABA-FILL-BF Bottom Fill Series are designed to fill below the level of the liquid to minimize foaming. Submerging the fill nozzle beneath the product as it is filling prevents air in the product, and helps to eliminate foaming. This in turn allows the products to be filled more quickly. The diving lance is lowered into the bottom of the container and is slowly raised as the container is filled with liquid, continually keeping the fill lance submerged. We offer two methods of raising the fill lance, either with a servo motor or an air cylinder. Features: Fills restricted opening containers (screw caps) as well as open top containers High accuracy Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails Electronic controls Semi-automatic One or two fill stations Available explosion proof rating (Class 1, Division 1 or Class 1, Division 2)	The ABA-PRESS-1NAR is a standard 1 gallon Non-powered Automatic Roller lid press unit. Features: Hand crank with chain and sprockets allows for full height adjustment from half pint through 1 gallon (5 liter) containers. 19 x 1 inch diameter gradually declining steel rollers to firmly press on lids. Rollers have 1/4 inch thick steel walls and are mounted on 1/4 inch stainless steel shafts using 2 x 1/4 inch double shielded bearings. Stainless steel sheet metal guard covers chain and sprockets.	ABA-SCALE-0082-RevB,Scale Riser Plates	The ABA-COV-85QTS is a cone style fill head with a 2 inch S-line inlet and a 1.85 inch diameter outlet for filling quart and gallon cans.	Bottom Fill Gravimetric Electronic Automatic eXplosion-Proof Liquid Filling Machines The ABA-FILL-BF Bottom Fill Series are designed to fill below the level of the liquid to minimize foaming and protect against exposure to static prone products. Submerging the fill nozzle beneath the product as it is filling prevents air in the product, and helps to eliminate foaming and static buildup. This in turn allows the products to be filled more quickly and in a safer manner. On our bottom fill machines, the diving lance style fill head is lowered into the bottom of the container utilizing either a Servo motor or a pneumatic air cylinder. Both methods offer accurate and easily adjustable filling and tracking. Once the fill cycle starts, the fill carraige slowly rises, drawing the fill head(s) up as it goes. As the container is filled with liquid, the head of the fill lance remains submerged under the level of the liquid. These paint filling machines are highly accurate and will increase the efficiency of any plant. Features: Fills restricted opening containers (screw caps) as well as open top containers High accuracy Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails Electronic controls Fully automatic One to six fill stations Explosion proof for C1D1 or C1D2 area	Bottom Fill Volumetric Electronic Automatic eXplosion Proof Liquid Filling Machine The ABA-FILL-BF Bottom Fill Series are designed to fill below the level of the liquid to minimize foaming. Submerging the fill nozzle beneath the product as it is filling prevents air in the product, and helps to eliminate foaming. This in turn allows the products to be filled more quickly. Available with one gallon or five gallon double acting volumetric pumps, each container is filled quickly as the diving lance monitors the product inside the container and submerges the nozzle beneath the liquid surface. The diving lance is lowered into the bottom of the container and is slowly raised as the container is filled with liquid. We offer two methods of raising the fill lance, either with a Servo motor or an air cylinder. Features: Dual mode top fill / bottom fill filling machine Electronic fully adjustable fill head carriage is accurate to within 1/16" inch Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails PLC controls Fully automatic One, two, three or four fill stations Continuously running conveyor	Top Fill Volumetric Pneumatic Semi-Automatic eXplosion proof Liquid Filling Machine The ABA-FILL-TF Top Fill Series are designed to fill open top containers. Our double acting positive displacement piston pumps are faster and have a longer life than single acting pumps as both sides of the piston are flooded with liquid at all times. These paint filling machines are highly efficient and fast fillers, increasing productivity and decreasing downtime. Semi-automatic liquid filling machines require the operator to manually position the container under the fill head and require minimal set-up when changing container size. Features: Fills open top containers One or five gallon double acting pumps Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails Pneumatic controls (can be used in both hazardous and non-hazardous areas) Semi-automatic One or two fill stations Designed for a C1D1 or C1D2 hazardous area
Short Description	A0333C1-RX(4)-UC-LF-CT ,Five Gallon air motor, 6” diameter x 10” stroke, replaced by ABA-PMTR-06X08R1, new part is fully interchangeable.	ABA-5GALL-64 Rev A and ABA-5GALL-68 Rev E casting drg.,Tee 5 Gallon pump	ABA-5GALL-71 Rev F,Check valve cylinder mount, 5 gallon pump, 4 x 10-24 threads.	ABA-COV-87A Rev B,Valve foot, 2.875 Outlet, Gallon cone nozzle, reduced 1/2 diameter,V”lvula de pie, 2,875 Outlet, boquilla de cono galones, redujo 1/2 di”metro	EX Proof (Motor Starter) Motor Manual Starting Switch, Push Button, 3 Phase, NEMA 0, Type 7 & 9 Bolted Enclosures, for use in Class 1, Groups C & D Divisions 1 & 2	5967K81,UCLF202-10,Cast Iron Flange-Mounted Steel Ball Bearing 4 Bolt Square Flange for 5/8” Shaft Dia, 3” Base L, for starwheel	Metric Phenolic Six-Lobe Knob, M6 X 1.0 Threaded Thru Hole, 40MM Dia	18-8 SS Flat Point Socket Set Screw 1/4-28 Thread, 1/4 Length	Top Fill Volumetric Electronic Automatic Liquid Filling Machines The ABA-FILL-TFxEA machine is an electronically controlled, automatic, volumetric machine which is designed to top fill open top containers utilizing one or five gallon double acting pumps.	Top Fill Volumetric Pneumatic Semi-Automatic Liquid Filling Machine The ABA-FILL-TFxPS machine is a pneumatically controlled, semi-automatic, volumetric machine which is designed to top fill open top containers utilizing one or five gallon double acting pumps.	Short Description	Bottom Fill Volumetric Electronic Automatic Liquid Filling Machine The ABA-FILL-BFxEA machine is an electronically controlled, fully automatic, volumetric machine which is designed to bottom fill half pint cans through 5 gallon pails.	Top Fill Gravimetric Electronic Automatic Liquid Filling Machines The ABA-FILL-TFGEA is an electronically controlled, net weight, automatic filling machine which is designed to top fill half pint to 5 gallon containers.	Bottom Fill Gravimetric Electronic Automatic Liquid Filling Machines The ABA-FILL-BFGEA is an electronically controlled, automatic, net weight filling machine which is designed to bottom fill containers from half pint to 5 gallon pails.	Bottom Fill Gravimetric Electronic Semi-Automatic Liquid Filling Machines The ABA-FILL-BFGES is an electronically controlled, semi-automatic, net weight filling machine which is designed to bottom-fill containers from half pint to 5 gallon pails.	The ABA-PRESS-1NAR is a standard 1 gallon Non-powered Automatic Roller lid press unit for pressing lids on half pint through 1 gallon containers.	ABA-SCALE-0082-RevB,Scale Riser Plates	The ABA-COV-85QTS is a cone style fill head with a 2 inch S-line inlet and a 1.85 inch diameter outlet for filling quart and gallon cans.	Bottom Fill Gravimetric Electronic Automatic eXplosion-Proof Liquid Filling Machines The ABA-FILL-BFGEA-X is an electronically controlled, automatic, explosion proof net weight filling machine which is designed to bottom fill containers from half pint to 5 gallon pails.	Bottom Fill Volumetric Electronic Automatic eXplosion Proof Liquid Filling Machine The ABA-FILL-BFxEA-X machine is an electronically controlled, fully automatic, explosion proof, volumetric machine which is designed to bottom fill half pint cans through 5 gallon pails.	Top Fill Volumetric Pneumatic Semi-Automatic eXplosion Proof Liquid Filling Machine The ABA-FILL-TFxPS-X machine is a pneumatically controlled, semi-automatic, volumetric machine which is designed to top fill open top containers utilizing one or five gallon double acting pumps and designed for a C1D1 or C1D2 area.
SKU	ABA-5GALL-01	ABA-5GALL-68	ABA-5GALL-71	ABA-COV-87A	609-AEW	5967K51	4273T81	94355A602	FILL-TFxEA	FILL-TFxPS	SKU	FILL-BFxEA	FILL-TFGEA	FILL-BFGEA	FILL-BFGES	PRESS-1NAR	ABA-SCALE-0082	COV-85QTS	FILL-BFGEA-X	FILL-BFxEA-X	FILL-TFxPS-X
Manufacturer	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	No	No	Manufacturer	No	No	No	No	No	N/A	No	No	No	No
Notes	DateUpdated:11/9/2009 15:36:20,ManufacturerNumber:0, PartPurchaseInstructions:Kaman Quote N408827 9.9.09 $637.09, AltSupplier:Norgren wasTJ10A-X04-AAA98 New A0333C1-RX(4)-UC-LF-CT 6X10 $585.94, LeadTime:Ref serial # 2662591-1 P/N S-A01717C Norgren quote #158767Q 4.7.08, ThieleSalesPrice:Fabco part # 60F1-10A1WA-BRN-CD04K cost ea 434.48 MILLER A4-50B2N-06.00-5.000-0138-N11N-9 $474, OemMargin:0.00,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, OrderDate:4/10/2008, #ABA-00001621P, Qty=1, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:43.00, PartRegularOrder:0, PartRequiresSerialNumber:0,	DateUpdated:8/5/2015 13:31:19, PartUpdatedBy:KirstyGaus,ManufacturerNumber:393, AltSupplier:wisc. $4,812.50 tool $271.49/25 mach $70.60 tool $2,100, ABA-5GALL-64 Casting, LeadTime:9/14 $459.20 plus surcharge $10.16 total $469.36 7/15 $3.665 surcharge, ThieleSalesPrice:3/06 $396.34 plus surcharges final price in 2006 with freight is $427.79, OemMargin:5.00, Location:Overflow rack 4 shelf 2 right, Notes:1.11.10 $445.83/10 or 12 $414.27/22 Surchage 1.74# = #18.10 $463.93 $432.37,UnUsedItem:0, MinimumStockLevel:2, OnOrder:0, OrderDate:5/28/2015, #ABA-00010473P, Qty=16, PartReOrderQty:6, PartLength:0.00, PartPackQty:0, PartWeight:8.40, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:9/11/2014 15:44:56, PartStockCheckedBy:KirstyGaus,	DateUpdated:8/19/2015 14:14:32,ManufacturerNumber:377, AltSupplier:Qualitek AAAQ7314 $136/10 12/02/2010 Cheetah $86/10 12.13.10, LeadTime:14WMP 29-355 Short welding ferrule, 3 S-line $9.48, ThieleSalesPrice:Stock Check 7/16/12, OemMargin:0.00, Location:10-06-07, Notes:Griffin $129/10,UnUsedItem:0, MinimumStockLevel:4, OnOrder:0, OrderDate:8/22/2011, #ABA-00004976P, Qty=10, PartReOrderQty:10, PartLength:0.00, PartPackQty:0, PartWeight:3.10, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/19/2015 14:14:32, PartStockCheckedBy:ChristopherBarber,	DateUpdated:8/14/2015 9:34:16, PartUpdatedBy:JacquelineTwigg,ManufacturerNumber:377, AltSupplier:Griffin $59.25/24 9.06 plus $1 for part number, LeadTime:McMaster 92196A246 $9.65/100 10-24 X 7/8 Socket cap screw, ThieleSalesPrice:Stock Check 7/3/12, OemMargin:0.00, Location:02-02-01 & 01A Overflow 02-06, Notes:24 OO Cheetah 7.12.05 ABA-2886 rcd 8.17.05, $58.90/20 $62.50/30 2/08,StockUsedSince:12.29.00, UnUsedItem:0, MinimumStockLevel:20, OnOrder:0, OrderDate:3/11/2015, #ABA-00010231P, Qty=25, PartReOrderQty:24, PartLength:0.00, PartPackQty:0, PartWeight:1.00, PartRegularOrder:1, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/14/2015 9:34:16, PartStockCheckedBy:KirstyGaus,	DateUpdated:8/11/2015 12:41:30, PartUpdatedBy:KirstyGaus,ManufacturerNumber:5, PartPurchaseInstructions:McMc Quote 11960006-00 $599.31, OemMargin:0.00, Notes:Revere 9/05 443.623 3/08 $519.00,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, OrderDate:7/30/2015, #ABA-00010736P, Qty=1, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:6.40, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00,	DateUpdated:9/3/2014 15:29:00, PartUpdatedBy:SimonWalker,ManufacturerNumber:1683, AltSupplier:5967K81 Mc Master $31.63 Weimer 7/11 alternative is $19.87, OemMargin:0.00, Location:17-01-00, Notes:Kaman Quote M276850 25.29 each,UnUsedItem:0, MinimumStockLevel:2, OnOrder:0, OrderDate:7/31/2013, #ABA-00007751P, Qty=2, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:0.93, PartRegularOrder:1, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:9/3/2014 15:29:00, PartStockCheckedBy:KirstyGaus,	DateUpdated:8/14/2015 15:19:26,ManufacturerNumber:540, ThieleSalesPrice:Stock Check 7/6/12, OemMargin:0.00, Location:04-05-13, Notes:Mcmasterr Carr used on M170 SAF-1S with container guide,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, OrderDate:9/20/2007, #ABA-00001030P, Qty=2, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:0.06, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/14/2015 15:19:26, PartStockCheckedBy:KirstyGaus,	DateAdded:4/21/2009 13:43:09, DateUpdated:7/7/2015 14:52:11, PartUpdatedBy:JacquelineTwigg,ManufacturerNumber:540, ThieleSalesPrice:Stock Check 6/24/13, OemMargin:0.00, Location:Blue-C-660,UnUsedItem:0, MinimumStockLevel:2, OnOrder:0, OrderDate:4/21/2009, #ABA-00002556P, Qty=1, PartReOrderQty:0, PartLength:0.00, PartPackQty:10, PartWeight:0.00, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:7/7/2015 14:52:11, PartStockCheckedBy:ChristineBarber,	No	No	Notes	No	No	No	No	No	DateAdded:3/20/2014 14:40:44, DateUpdated:8/19/2015 14:27:21, PartUpdatedBy:KirstyGaus,ManufacturerNumber:2018, PartPurchaseInstructions:6=47 12=43 18=42, OemMargin:0.00, Location:10-01-06, Notes:quote #13663,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, OrderDate:8/8/2014, #ABA-00009442P, Qty=6, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:5.80, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/19/2015 14:27:21, PartStockCheckedBy:ChristopherBarber,	N/A	No	No	No