Compare Products

5967K81,UCLF202-10,Cast Iron Flange-Mounted Steel Ball Bearing 4 Bolt Square Flange for 5/8” Shaft Dia, 3” Base L, for starwheel

18-8 Stainless Steel AN 960 Flat Washer 7/8” Sz, No. C1416, .89” Id, 1.5” Od,.085”-.095” Thk

12 inch 304 SS 1/2 inch Support Rod with End caps

PSR50MD6,Vacuum Switch (PRESET MIN I 50% VACUUM SWITCH)

The ABA-LPHSC-V is a 5 gallon plastic or metal lid placer. This unit has an ergonomically low loading conveyor which is especially beneficial for higher speed applications and loading heavy metal lids. Stacks of lids are conveyed into the lid stacker, raised, and rotated to the escapement chute. This unit self-centers the lids on the containers as they pass below it.

Features:

• 5 gallon plastic and metal lids
• Stack, lift and load assembly
• Rotary transfer assembly
• Vertical stack escapement assembly
• Adjustable release paddles allow for the placement of round, square, and rectangular lids.
• Automatic lid priming keeps the lid chute full and ready for the next container
• In feed line stops automatically space incoming containers
• Low lid stack notifications
• Automatically stops containers when unit is out of lids.

The ABA-PRESS-5GALL-P is a powered lid press primarily designed for closing 5 gallon pails, but will also close 1 gallon pails.

Features:

• Hand crank with chain and sprockets allows for height adjustment
• Stainless steel sheet metal guard covers chain and sprockets
• 5 lead in rollers and 6 powered rollers firmly press lids on

ABA-COV-85BO is a cone fill head with 2 inch S-Line inlet featuring air shear or NO2 blanket technology. The forced air helps to blow off or shear a high viscosity product when the fill is completed.

Bottom Fill Gravimetric Electronic Automatic eXplosion-Proof Liquid Filling Machines

The ABA-FILL-BF Bottom Fill Series are designed to fill below the level of the liquid to minimize foaming and protect against exposure to static prone products. Submerging the fill nozzle beneath the product as it is filling prevents air in the product, and helps to eliminate foaming and static buildup. This in turn allows the products to be filled more quickly and in a safer manner.

On our bottom fill machines, the diving lance style fill head is lowered into the bottom of the container utilizing either a Servo motor or a pneumatic air cylinder. Both methods offer accurate and easily adjustable filling and tracking. Once the fill cycle starts, the fill carraige slowly rises, drawing the fill head(s) up as it goes. As the container is filled with liquid, the head of the fill lance remains submerged under the level of the liquid. These paint filling machines are highly accurate and will increase the efficiency of any plant.

Features:

• Fills restricted opening containers (screw caps) as well as open top containers 
• High accuracy 
• Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails 
• Electronic controls 
• Fully automatic 
• One to six fill stations
• Explosion proof for C1D1 or C1D2 area

Bottom Fill Volumetric Electronic Automatic eXplosion Proof Liquid Filling Machine

The ABA-FILL-BF Bottom Fill Series are designed to fill below the level of the liquid to minimize foaming. Submerging the fill nozzle beneath the product as it is filling prevents air in the product, and helps to eliminate foaming. This in turn allows the products to be filled more quickly. 

Available with one gallon or five gallon double acting volumetric pumps, each container is filled quickly as the diving lance monitors the product inside the container and submerges the nozzle beneath the liquid surface.

The diving lance is lowered into the bottom of the container and is slowly raised as the container is filled with liquid. We offer two methods of raising the fill lance, either with a Servo motor or an air cylinder.

Features:

• Dual mode top fill / bottom fill filling machine
• Electronic fully adjustable fill head carriage is accurate to within 1/16" inch
• Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails
• PLC controls
• Fully automatic
• One, two, three or four fill stations
• Continuously running conveyor

Top Fill Volumetric Pneumatic Semi-Automatic eXplosion proof Liquid Filling Machine

The ABA-FILL-TF Top Fill Series are designed to fill open top containers. Our double acting positive displacement piston pumps are faster and have a longer life than single acting pumps as both sides of the piston are flooded with liquid at all times. These paint filling machines are highly efficient and fast fillers, increasing productivity and decreasing downtime.

Semi-automatic liquid filling machines require the operator to manually position the container under the fill head and require minimal set-up when changing container size.

Features:

• Fills open top containers
• One or five gallon double acting pumps
• Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails
• Pneumatic controls (can be used in both hazardous and non-hazardous areas)
• Semi-automatic
• One or two fill stations
• Designed for a C1D1 or C1D2 hazardous area

ABA-CRIMP-1EA-1C is a single stage electronic crimper which is mounted on a continuously running conveyor. This lid crimping machine is designed to seal lids onto filled 5 gallon pails.

ABA-COV-85QTS-2STAGE is a two stage, cone style fill head with a 2 inch S-Line inlet and a 1.85 inch diameter outlet for filling quart and gallon cans. A 2 stage fill head eliminates the need for a ball valve because it opens fully at the beginning of a fill and then closes part way in order to dribble for the end of the fill before closing completely when the fill is complete.

5967K81,UCLF202-10,Cast Iron Flange-Mounted Steel Ball Bearing 4 Bolt Square Flange for 5/8” Shaft Dia, 3” Base L, for starwheel

18-8 Stainless Steel AN 960 Flat Washer 7/8” Sz, No. C1416, .89” Id, 1.5” Od,.085”-.095” Thk

12 inch 304 SS 1/2 inch Support Rod with End caps

PSR50MD6,Vacuum Switch (PRESET MIN I 50% VACUUM SWITCH)

 The ABA-LPHSC-V is a 5 gallon plastic or metal lid placer with a stack, lift, and load assembly and an escapement chute.

The ABA-PRESS-5GALL-P is a powered lid press unit.

ABA-COV-85BO is a cone fill head with air shear.

Bottom Fill Gravimetric Electronic Automatic eXplosion-Proof Liquid Filling Machines

The ABA-FILL-BFGEA-X is an electronically controlled, automatic, explosion proof net weight filling machine which is designed to bottom fill containers from half pint to 5 gallon pails.

Bottom Fill Volumetric Electronic Automatic eXplosion Proof Liquid Filling Machine

 

The ABA-FILL-BFxEA-X machine is an electronically controlled, fully automatic, explosion proof, volumetric machine which is designed to bottom fill half pint cans through 5 gallon pails. 

Top Fill Volumetric Pneumatic Semi-Automatic eXplosion Proof Liquid Filling Machine

 The ABA-FILL-TFxPS-X machine is a pneumatically controlled, semi-automatic, volumetric machine which is designed to top fill open top containers utilizing one or five gallon double acting pumps and designed for a C1D1 or C1D2 area.

ABA-CRIMP-1EA-1C is a single stage electronic crimper which is mounted on a continuously running conveyor.

ABA-COV-85QTS-2STAGE is a two stage, cone style fill head with a 2 inch S-Line inlet and a 1.85 inch diameter outlet for filling quart and gallon cans.

5967K51

98017A225

VG-215-12-12T

NPSR50MD6

LPHSC-V

PRESS-5GALL-P

COV-85BO

FILL-BFGEA-X

FILL-BFxEA-X

FILL-TFxPS-X

CRIMP-1EA-1C

COV-85QTS-2STAGE

N/A

N/A

N/A

N/A

No

No

No

No

No

No

No

No

DateUpdated:9/3/2014 15:29:00, PartUpdatedBy:SimonWalker,ManufacturerNumber:1683, AltSupplier:5967K81 Mc Master $31.63 Weimer 7/11 alternative is $19.87, OemMargin:0.00, Location:17-01-00, Notes:Kaman Quote M276850 25.29 each,UnUsedItem:0, MinimumStockLevel:2, OnOrder:0, OrderDate:7/31/2013, #ABA-00007751P, Qty=2, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:0.93, PartRegularOrder:1, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:9/3/2014 15:29:00, PartStockCheckedBy:KirstyGaus,

DateUpdated:7/14/2015 14:14:17, PartUpdatedBy:JacquelineTwigg,ManufacturerNumber:540, ThieleSalesPrice:Stock Check 6/28/12, OemMargin:0.00, Location:Red-A-800, Notes:McMaster Carr $7.44/10 2/06,UnUsedItem:0, MinimumStockLevel:2, OnOrder:0, OrderDate:8/26/2013, #ABA-00007847P, Qty=1, PartReOrderQty:10, PartLength:0.00, PartPackQty:10, PartWeight:0.00, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:7/14/2015 14:14:17, PartStockCheckedBy:ChristineBarber,

DateAdded:10/2/2009 9:26:55, DateUpdated:9/21/2012 12:32:36,ManufacturerNumber:595, OemMargin:0.00, Location:N/A,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:0.00, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00,

DateAdded:10/20/2010 15:14:47, DateUpdated:7/3/2015 8:15:57, PartUpdatedBy:KirstyGaus,ManufacturerNumber:1959, ThieleSalesPrice:Stock Check 7/23/12, OemMargin:0.00, Location:16-05-05,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, OrderDate:10/1/2013, #ABA-00008025P, Qty=4, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:0.02, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:9/9/2014 15:58:58, PartStockCheckedBy:KirstyGaus,

No

No

No

No

No

No

No

No