Compare Products

Print This Page
 
  609-AEW

609-AEW

FILL-TFGEA

FILL-TFGEA

PRESS-5NAR

PRESS-5NAR

LDHS

LDHS

Description
EX Proof (Motor Starter) Motor Manual Starting Switch, Push Button, 3 Phase, NEMA 0, Type 7 & 9 Bolted Enclosures, for use in Class 1, Groups C & D Divisions 1 & 2

Top Fill Gravimetric Electronic Automatic Liquid Filling Machines

The ABA-FILL-TF Top Fill Series are designed to fill open top containers from half pint through 5 gallon. Simple clean-up with only two ball valves and a fill head as wetted parts.

Features:

  • Fills open top containers
  • High accuracy
  • Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails
  • PLC controls
  • Fully automatic
  • One, two, three or four fill stations
  • Continuously running conveyor
  • Available explosion proof rating (Class 1, Division 1 or Class 1, Division 2)

The ABA-PRESS-5NAR is a standard 5 gallon Non-powered Automatic Roller lid press unit.

Features:

  • Hand crank with chain and sprockets allows for full height adjustment from pint through 6 gallon pails.
  • 32 x 1 inch diameter steel rollers gradually declining steel rollers to firmly press on lids
  • Rollers have 1/4 inch thick stainless steel walls and are mounted on 1/4 inch stainless steel shafts using 2 x 1/4 inch double shielded bearings.
  • Stainless steel sheet metal guard covers chain and sprockets.
  • Press available as washdown capable - fully stainless steel with stainless steel washdown motor. See photo number 2 above (M399)

Our LDHS lid dropper unit is a high speed lid dropper for metal and plastic lids which mounts to all ABA lid press units (i.e. not a stand-alone unit; must be mounted to press). The star-wheel sets are designed to center the lids before the containers pass underneath the press.

Features:

  • Adjustable from ½ pint through gallon containers (maximum diameter 7 inches)
  • Simple size changeover using ratchet handles, no tools required
  • Simple height adjustment via lid press crank handle
  • Interchangeable star-wheel sets for lid alignment
  • Speeds of 60+ lids per minute
  • Standard vertical lid hopper of 24 inch capacity
  • Optional 72 inch down-stacker for extra capacity (shown above in far right photo)
  • Pneumatic or electronic controls. 
Short Description
EX Proof (Motor Starter) Motor Manual Starting Switch, Push Button, 3 Phase, NEMA 0, Type 7 & 9 Bolted Enclosures, for use in Class 1, Groups C & D Divisions 1 & 2

Top Fill Gravimetric Electronic Automatic Liquid Filling Machines

The ABA-FILL-TFGEA is an electronically controlled, net weight, automatic filling machine which is designed to top fill half pint to 5 gallon containers. 

 

 The ABA-PRESS-5NAR is a standard 5 gallon Non-powered Automatic Roller lid press unit for pressing lids on pint through 6 gallon pails.

 The ABA-LDHS lid dropper unit is a high speed lid dropper for metal and plastic lids which mounts to all ABA lid press units and can drop lids from 1/2 pint through 1 gallon.

SKU
609-AEW
FILL-TFGEA
PRESS-5NAR
LDHS
Manufacturer
N/A
No
No
No
Notes
DateUpdated:8/11/2015 12:41:30, PartUpdatedBy:KirstyGaus,ManufacturerNumber:5, PartPurchaseInstructions:McMc Quote 11960006-00 $599.31, OemMargin:0.00, Notes:Revere 9/05 443.623 3/08 $519.00,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, OrderDate:7/30/2015, #ABA-00010736P, Qty=1, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:6.40, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00,
No
No
No