Compare Products

Print This Page
   
  ABA-5GALL-01

ABA-5GALL-01

 ABA-5GALL-23

ABA-5GALL-23

 ABA-5GALL-68

ABA-5GALL-68

 33.006

33.006

 FILL-TFxEA

FILL-TFxEA

 FILL-BFxEA

FILL-BFxEA

 FILL-TFGEA

FILL-TFGEA

 PRESS-1NAR

PRESS-1NAR

 LPHSC-5

LPHSC-5

 FILL-TFxPA

FILL-TFxPA

   LDHS

LDHS

 RT-60-IN

RT-60-IN

 COV-85QTS

COV-85QTS

 COV-85QTSF

COV-85QTSF

 COV-BC-0.75x19

COV-BC-0.75x19

 COV-BC-1.25x19

COV-BC-1.25x19

 80-GCV

80-GCV

 PRESS-5GALL-P

PRESS-5GALL-P

 FILL-BFGEA-X

FILL-BFGEA-X
Description
A0333C1-RX(4)-UC-LF-CT ,Five Gallon air motor, 6” diameter x 10” stroke, replaced by ABA-PMTR-06X08R1, new part is fully interchangeable.
128892C,5 Gallon pump cylinder,5 Gallon cilindro de la bomba
ABA-5GALL-64 Rev A and ABA-5GALL-68 Rev E casting drg.,Tee 5 Gallon pump
Mounting Strap for Pneumatic Position Transmitter, P/N 33.21.326 8 - 100mm

Top Fill Volumetric Electronic Automatic Liquid Filling Machines

The ABA-FILL-TF Top Fill Series are designed to fill open top containers. Our double acting positive displacement piston pumps are faster and have a longer life than single acting pumps as both sides of the piston are flooded with liquid at all times.

Automatic machines require minimal operator intervention and allows for faster CPM (Containers Per Minute) count.

Features:

  • Fills open top containers
  • One or five gallon double acting pumps
  • Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails
  • PLC controls
  • Fully automatic
  • One, two, three or four fill stations
  • Available explosion proof rating (Class 1, Division 1 or Class 1, Division 2)

 

Bottom Fill Volumetric Electronic Automatic Liquid Filling Machine

The ABA-FILL-BF Bottom Fill Series are designed to fill below the level of the liquid to minimize foaming. Submerging the fill nozzle beneath the product as it is filling prevents air in the product, and helps to eliminate foaming. This in turn allows the products to be filled more quickly. 

Available with one gallon or five gallon double acting volumetric pumps, each container is filled quickly as the diving lance monitors the product inside the container and submerges the nozzle beneath the liquid surface.

The diving lance is lowered into the bottom of the container and is slowly raised as the container is filled with liquid. We offer two methods of raising the fill lance, either with a Servo motor or an air cylinder.

Features:

  • Dual mode top fill / bottom fill filling machine
  • Electronic fully adjustable fill head carriage is accurate to within 1/16" inch
  • Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails
  • PLC controls
  • Fully automatic
  • One, two, three or four fill stations
  • Continuously running conveyor
  • Available explosion proof rating (Class 1, Division 1 or Class 1, Division 2)

Top Fill Gravimetric Electronic Automatic Liquid Filling Machines

The ABA-FILL-TF Top Fill Series are designed to fill open top containers from half pint through 5 gallon. Simple clean-up with only two ball valves and a fill head as wetted parts.

Features:

  • Fills open top containers
  • High accuracy
  • Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails
  • PLC controls
  • Fully automatic
  • One, two, three or four fill stations
  • Continuously running conveyor
  • Available explosion proof rating (Class 1, Division 1 or Class 1, Division 2)

The ABA-PRESS-1NAR is a standard 1 gallon Non-powered Automatic Roller lid press unit.

Features:

  • Hand crank with chain and sprockets allows for full height adjustment from half pint through 1 gallon (5 liter) containers.
  • 19 x 1 inch diameter gradually declining steel rollers to firmly press on lids.
  • Rollers have 1/4 inch thick steel walls and are mounted on 1/4 inch stainless steel shafts using 2 x 1/4 inch double shielded bearings.
  • Stainless steel sheet metal guard covers chain and sprockets.

The ABA-LPHSC-5 is 5 gallon plastic and metal lid placer with a chute based design. This unit self-centers the lids on the containers as they pass below it.

Features:

  • Adjustable release paddles allow for the placement of round, square, and rectangular lids.
  • Automatic lid priming keeps the lid chute full and ready for the next container
  • In feed line stops automatically space incoming containers
  • Low lid stack notifications
  • Automatically stops containers when unit is out of lids.

Top Fill Volumetric Pneumatic Automatic Liquid Filling Machines

The ABA-FILL-TFxPA is designed to fill open top containers. Our double acting positive displacement piston pumps are faster and have a longer life than single acting pumps as both sides of the piston are flooded with liquid at all times.

Features:

  • Fills open top containers
  • One or five gallon double acting pumps
  • Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails
  • Pneumatic controls (can be used in both hazardous and non-hazardous areas)
  • Fully automatic
  • One, two, three or four fill stations
 Description

Our LDHS lid dropper unit is a high speed lid dropper for metal and plastic lids which mounts to all ABA lid press units (i.e. not a stand-alone unit; must be mounted to press). The star-wheel sets are designed to center the lids before the containers pass underneath the press.

Features:

  • Adjustable from ½ pint through gallon containers (maximum diameter 7 inches)
  • Simple size changeover using ratchet handles, no tools required
  • Simple height adjustment via lid press crank handle
  • Interchangeable star-wheel sets for lid alignment
  • Speeds of 60+ lids per minute
  • Standard vertical lid hopper of 24 inch capacity
  • Optional 72 inch down-stacker for extra capacity (shown above in far right photo)
  • Pneumatic or electronic controls. 

The ABA-RT-60-IN is a 60 inch diameter in feed rotary table. When used as part of an automated line, it allows operators to pre-load large quantities of containers at the start of the line to enhance and speed up the filling process.

Features:

  • Container alignment paddles ensure that containers are fed into the conveyor one by one.
  • Constructed from stainless steel with a plated circular feed table
  • Container contact points are equipped with Teflon runners to prevent marking containers

The ABA-COV-85QTS is a cone style fill head with a 2 inch S-line inlet and a 1.85 inch diameter outlet for filling quart and gallon cans. 

The ABA-COV-85QTSF is a cone style fill head with a 2 inch S-line inlet for filling quart and gallon cans and an additional flush attachment.

Product Specifications:

  • 2 inch S-line inlet
  • 1.85 inch diameter outlet
  • 2.5 inch diameter flush flange

The ABA-COV-BC-0.75x19 is a diving lance style fill head with a 0.75 inch outer diameter and a 19 inch fill lance which is designed to bottom fill containers. 

The ABA-COV-BC-1.25x19 is a diving probe style fill head with a 1.25 inch outer diameter and a 19 inch lance size. This fill head is designed to bottom fill containers.

The ABA-80-GCV is a one gallon double acting piston pump with gravity check valves.

Product Features:

  • Stainless steel and Teflon wetted parts
  • Cast end caps, tees, and elbows
  • Quick release clamps for ease of maintenance
  • Fills from half pint to five quarts in a single cycle

The ABA-PRESS-5GALL-P is a powered lid press primarily designed for closing 5 gallon pails, but will also close 1 gallon pails.

Features:
  • Hand crank with chain and sprockets allows for height adjustment
  • Stainless steel sheet metal guard covers chain and sprockets
  • 5 lead in rollers and 6 powered rollers firmly press lids on

Bottom Fill Gravimetric Electronic Automatic eXplosion-Proof Liquid Filling Machines

The ABA-FILL-BF Bottom Fill Series are designed to fill below the level of the liquid to minimize foaming and protect against exposure to static prone products. Submerging the fill nozzle beneath the product as it is filling prevents air in the product, and helps to eliminate foaming and static buildup. This in turn allows the products to be filled more quickly and in a safer manner.

On our bottom fill machines, the diving lance style fill head is lowered into the bottom of the container utilizing either a Servo motor or a pneumatic air cylinder. Both methods offer accurate and easily adjustable filling and tracking. Once the fill cycle starts, the fill carraige slowly rises, drawing the fill head(s) up as it goes. As the container is filled with liquid, the head of the fill lance remains submerged under the level of the liquid. These paint filling machines are highly accurate and will increase the efficiency of any plant.

Features:

  • Fills restricted opening containers (screw caps) as well as open top containers 
  • High accuracy 
  • Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails 
  • Electronic controls 
  • Fully automatic 
  • One to six fill stations
  • Explosion proof for C1D1 or C1D2 area
Short Description
A0333C1-RX(4)-UC-LF-CT ,Five Gallon air motor, 6” diameter x 10” stroke, replaced by ABA-PMTR-06X08R1, new part is fully interchangeable.
128892C,5 Gallon pump cylinder,5 Gallon cilindro de la bomba
ABA-5GALL-64 Rev A and ABA-5GALL-68 Rev E casting drg.,Tee 5 Gallon pump
Mounting Strap for Pneumatic Position Transmitter, P/N 33.21.326 8 - 100mm

Top Fill Volumetric Electronic Automatic Liquid Filling Machines

The ABA-FILL-TFxEA machine is an electronically controlled, automatic, volumetric machine which is designed to top fill open top containers utilizing one or five gallon double acting pumps.

Bottom Fill Volumetric Electronic Automatic Liquid Filling Machine

The ABA-FILL-BFxEA machine is an electronically controlled, fully automatic, volumetric machine which is designed to bottom fill half pint cans through 5 gallon pails. 

 

Top Fill Gravimetric Electronic Automatic Liquid Filling Machines

The ABA-FILL-TFGEA is an electronically controlled, net weight, automatic filling machine which is designed to top fill half pint to 5 gallon containers. 

 

The ABA-PRESS-1NAR is a standard 1 gallon Non-powered Automatic Roller lid press unit for pressing lids on half pint through 1 gallon containers.

 The ABA-LPHSC-5 is a 5 gallon plastic and metal lid placer with a chute based design.

Top Fill Volumetric Pneumatic Automatic Liquid Filling Machines

The ABA-FILL-TFxPA is a pneumatically controlled, automatic, volumetric machine which is designed to top fill open top containers utilizing one or five gallon double acting pumps.

 Short Description

 The ABA-LDHS lid dropper unit is a high speed lid dropper for metal and plastic lids which mounts to all ABA lid press units and can drop lids from 1/2 pint through 1 gallon.

 The ABA-RT-60-IN is a 60 inch diameter in feed rotary table.

The ABA-COV-85QTS is a cone style fill head with a 2 inch S-line inlet and a 1.85 inch diameter outlet for filling quart and gallon cans. 

The ABA-COV-85QTSF is a cone style fill head with a 2 inch S-line inelt for filling quart and gallon cans and an additional flush attachment.

The ABA-COV-BC-0.75x19 is a diving lance style fill head which is designed to bottom fill containers. 

The ABA-COV-BC-1.25x19 is a diving probe style fill head which is designed to bottom fill containers.

The ABA-80-GCV is a double acting piston pump with gravity check valves.
The ABA-PRESS-5GALL-P is a powered lid press unit.

Bottom Fill Gravimetric Electronic Automatic eXplosion-Proof Liquid Filling Machines

The ABA-FILL-BFGEA-X is an electronically controlled, automatic, explosion proof net weight filling machine which is designed to bottom fill containers from half pint to 5 gallon pails.
SKU
ABA-5GALL-01
ABA-5GALL-23
ABA-5GALL-68
33.006
FILL-TFxEA
FILL-BFxEA
FILL-TFGEA
PRESS-1NAR
LPHSC-5
FILL-TFxPA
SKU
LDHS
RT-60-IN
COV-85QTS
COV-85QTSF
COV-BC-0.75x19
COV-BC-1.25x19
80-GCV
PRESS-5GALL-P
FILL-BFGEA-X
Manufacturer
N/A
N/A
N/A
N/A
No
No
No
No
No
No
Manufacturer
No
No
No
No
No
No
No
No
No
Notes
DateUpdated:11/9/2009 15:36:20,ManufacturerNumber:0, PartPurchaseInstructions:Kaman Quote N408827 9.9.09 $637.09, AltSupplier:Norgren wasTJ10A-X04-AAA98 New A0333C1-RX(4)-UC-LF-CT 6X10 $585.94, LeadTime:Ref serial # 2662591-1 P/N S-A01717C Norgren quote #158767Q 4.7.08, ThieleSalesPrice:Fabco part # 60F1-10A1WA-BRN-CD04K cost ea 434.48
MILLER A4-50B2N-06.00-5.000-0138-N11N-9 $474, OemMargin:0.00,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, OrderDate:4/10/2008, #ABA-00001621P, Qty=1, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:43.00, PartRegularOrder:0, PartRequiresSerialNumber:0,
DateUpdated:5/8/2015 13:07:37, PartUpdatedBy:KirstyGaus,ManufacturerNumber:373, LeadTime:4/14 Mat $267 Mach $368 Freight $60 = $695, OemMargin:2.00, Location:Overflow Rack 2, Notes:Nippon Quoted Standard S. Am price 7/09 $2,321.65,StockUsedSince:4/3/97, UnUsedItem:0, MinimumStockLevel:5, OnOrder:0, OrderDate:9/11/2014, #ABA-00009619P, Qty=8, PartReOrderQty:8, PartLength:0.00, PartPackQty:0, PartWeight:26.00, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:7/23/2013 15:03:14, PartStockCheckedBy:ChristopherBarber,
DateUpdated:8/5/2015 13:31:19, PartUpdatedBy:KirstyGaus,ManufacturerNumber:393, AltSupplier:wisc. $4,812.50 tool $271.49/25 mach $70.60 tool $2,100, ABA-5GALL-64 Casting, LeadTime:9/14 $459.20 plus surcharge $10.16 total $469.36 7/15 $3.665 surcharge, ThieleSalesPrice:3/06 $396.34 plus surcharges final price in 2006 with freight is $427.79, OemMargin:5.00, Location:Overflow rack 4 shelf 2 right, Notes:1.11.10 $445.83/10 or 12 $414.27/22 Surchage 1.74# = #18.10 $463.93 $432.37,UnUsedItem:0, MinimumStockLevel:2, OnOrder:0, OrderDate:5/28/2015, #ABA-00010473P, Qty=16, PartReOrderQty:6, PartLength:0.00, PartPackQty:0, PartWeight:8.40, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:9/11/2014 15:44:56, PartStockCheckedBy:KirstyGaus,
DateAdded:5/18/2012 10:28:37, DateUpdated:8/19/2015 10:38:33,ManufacturerNumber:1969, OemMargin:0.00, Location:08-06-16,UnUsedItem:0, MinimumStockLevel:5, OnOrder:0, OrderDate:4/8/2013, #ABA-00007318P, Qty=4, PartReOrderQty:4, PartLength:0.00, PartPackQty:0, PartWeight:0.05, PartRegularOrder:1, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/19/2015 10:38:33, PartStockCheckedBy:ChristopherBarber,
No
No
No
No
No
No
Notes
No
N/A
N/A
No
N/A
N/A
No
No
No