Compare Products

Print This Page


	ABA-5GALL-04	ABA-5GALL-68	ABA-5GALL-71	609-AEW	5967K51	ABA-PMTR-06X08R1	94355A602	7113K454	FILL-TFxPS	FILL-TFGES		FILL-BFGES	PRESS-1NAR	LPHSC-5	RT-60-OUT	COV-85QTSF	COV-85A	FILL-BFGEA-X
Description	128891B,128891,ABA-5GALL-04-RevC,5 Gallon Teflon End Seal,5 galones de tefl”n Seal End	ABA-5GALL-64 Rev A and ABA-5GALL-68 Rev E casting drg.,Tee 5 Gallon pump	ABA-5GALL-71 Rev F,Check valve cylinder mount, 5 gallon pump, 4 x 10-24 threads.	EX Proof (Motor Starter) Motor Manual Starting Switch, Push Button, 3 Phase, NEMA 0, Type 7 & 9 Bolted Enclosures, for use in Class 1, Groups C & D Divisions 1 & 2	5967K81,UCLF202-10,Cast Iron Flange-Mounted Steel Ball Bearing 4 Bolt Square Flange for 5/8” Shaft Dia, 3” Base L, for starwheel	129315C,F1AU-10A1W-AU00,Air motor for 5 gallon pump, A Series, Front Flange Mount, 6 diameter x 10 inch stroke, Std rod 1.275 Rod Dia, Style 1 (1-14 Male Thds) 1/2 NPTF Port, no cushions, 1A-Rod Ext 4.0, BC Bumper Cap with SS Tie rods and SS Rod, 1/2-20 thread tie rods	18-8 SS Flat Point Socket Set Screw 1/4-28 Thread, 1/4 Length	Standard Crimp-on Ring Terminal Nylon Insulated, 16-14 Wire Gauge, #8 Stud, 600V	Top Fill Volumetric Pneumatic Semi-Automatic Liquid Filling Machine The ABA-FILL-TF Top Fill Series are designed to fill open top containers. Our double acting positive displacement piston pumps are faster and have a longer life than single acting pumps as both sides of the piston are flooded with liquid at all times. Semi-automatic liquid filling machines require the operator to manually position the container under the fill head and require minimal set-up when changing container size. Features: Fills open top containers One or five gallon double acting pumps Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails Pneumatic controls (can be used in both hazardous and non-hazardous areas) Semi-automatic One or two fill stations	Top Fill Gravimetric Electronic Semi-Automatic Liquid Filling Machines The ABA-FILL-TF Top Fill Series are designed to fill open top containers from half pint through 5 gallon. Simple clean-up with only two ball valves and a fill head as wetted parts. Features: Fills open top containers High accuracy Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails Electronic controls Semi- automatic One or two fill stations Available explosion proof rating (Class 1, Division 1 or Class 1, Division 2)	Description	Bottom Fill Gravimetric Electronic Semi-Automatic Liquid Filling Machines The ABA-FILL-BF Bottom Fill Series are designed to fill below the level of the liquid to minimize foaming. Submerging the fill nozzle beneath the product as it is filling prevents air in the product, and helps to eliminate foaming. This in turn allows the products to be filled more quickly. The diving lance is lowered into the bottom of the container and is slowly raised as the container is filled with liquid, continually keeping the fill lance submerged. We offer two methods of raising the fill lance, either with a servo motor or an air cylinder. Features: Fills restricted opening containers (screw caps) as well as open top containers High accuracy Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails Electronic controls Semi-automatic One or two fill stations Available explosion proof rating (Class 1, Division 1 or Class 1, Division 2)	The ABA-PRESS-1NAR is a standard 1 gallon Non-powered Automatic Roller lid press unit. Features: Hand crank with chain and sprockets allows for full height adjustment from half pint through 1 gallon (5 liter) containers. 19 x 1 inch diameter gradually declining steel rollers to firmly press on lids. Rollers have 1/4 inch thick steel walls and are mounted on 1/4 inch stainless steel shafts using 2 x 1/4 inch double shielded bearings. Stainless steel sheet metal guard covers chain and sprockets.	The ABA-LPHSC-5 is 5 gallon plastic and metal lid placer with a chute based design. This unit self-centers the lids on the containers as they pass below it. Features: Adjustable release paddles allow for the placement of round, square, and rectangular lids. Automatic lid priming keeps the lid chute full and ready for the next container In feed line stops automatically space incoming containers Low lid stack notifications Automatically stops containers when unit is out of lids.	The ABA-RT-60-OUT is a 60 inch diameter out feed rotary table. When used as part of an automated line, it collates containers as they come off the conveyor and allows for a large quantity of containers to sit until they are ready to be moved forward to the next stage of the process. Features: Constructed from stainless steel with a plated circular feed table Container contact points are equipped with Teflon runners to prevent marking containers Stainless steel packaging table topped with UHMW plastic allows for easy removal of filled containers	The ABA-COV-85QTSF is a cone style fill head with a 2 inch S-line inlet for filling quart and gallon cans and an additional flush attachment. Product Specifications: 2 inch S-line inlet 1.85 inch diameter outlet 2.5 inch diameter flush flange	The ABA-COV-85A is a cone style fill head with a 2 inch S-line inlet and a 2.875 inch outlet, which is designed to fill gallon cans.	Bottom Fill Gravimetric Electronic Automatic eXplosion-Proof Liquid Filling Machines The ABA-FILL-BF Bottom Fill Series are designed to fill below the level of the liquid to minimize foaming and protect against exposure to static prone products. Submerging the fill nozzle beneath the product as it is filling prevents air in the product, and helps to eliminate foaming and static buildup. This in turn allows the products to be filled more quickly and in a safer manner. On our bottom fill machines, the diving lance style fill head is lowered into the bottom of the container utilizing either a Servo motor or a pneumatic air cylinder. Both methods offer accurate and easily adjustable filling and tracking. Once the fill cycle starts, the fill carraige slowly rises, drawing the fill head(s) up as it goes. As the container is filled with liquid, the head of the fill lance remains submerged under the level of the liquid. These paint filling machines are highly accurate and will increase the efficiency of any plant. Features: Fills restricted opening containers (screw caps) as well as open top containers High accuracy Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails Electronic controls Fully automatic One to six fill stations Explosion proof for C1D1 or C1D2 area
Short Description	128891B,128891,ABA-5GALL-04-RevC,5 Gallon Teflon End Seal,5 galones de tefl”n Seal End	ABA-5GALL-64 Rev A and ABA-5GALL-68 Rev E casting drg.,Tee 5 Gallon pump	ABA-5GALL-71 Rev F,Check valve cylinder mount, 5 gallon pump, 4 x 10-24 threads.	EX Proof (Motor Starter) Motor Manual Starting Switch, Push Button, 3 Phase, NEMA 0, Type 7 & 9 Bolted Enclosures, for use in Class 1, Groups C & D Divisions 1 & 2	5967K81,UCLF202-10,Cast Iron Flange-Mounted Steel Ball Bearing 4 Bolt Square Flange for 5/8” Shaft Dia, 3” Base L, for starwheel	129315C,F1AU-10A1W-AU00,Air motor for 5 gallon pump, A Series, Front Flange Mount, 6 diameter x 10 inch stroke, Std rod 1.275 Rod Dia, Style 1 (1-14 Male Thds) 1/2 NPTF Port, no cushions, 1A-Rod Ext 4.0, BC Bumper Cap with SS Tie rods and SS Rod, 1/2-20 thread tie rods	18-8 SS Flat Point Socket Set Screw 1/4-28 Thread, 1/4 Length	Standard Crimp-on Ring Terminal Nylon Insulated, 16-14 Wire Gauge, #8 Stud, 600V	Top Fill Volumetric Pneumatic Semi-Automatic Liquid Filling Machine The ABA-FILL-TFxPS machine is a pneumatically controlled, semi-automatic, volumetric machine which is designed to top fill open top containers utilizing one or five gallon double acting pumps.	Top Fill Gravimetric Electronic Semi-Automatic Liquid Filling Machines The ABA-FILL-TFGES is an electronically controlled, net weight, semi-automatic filling machine which is designed to top fill half pint through 5 gallon containers.	Short Description	Bottom Fill Gravimetric Electronic Semi-Automatic Liquid Filling Machines The ABA-FILL-BFGES is an electronically controlled, semi-automatic, net weight filling machine which is designed to bottom-fill containers from half pint to 5 gallon pails.	The ABA-PRESS-1NAR is a standard 1 gallon Non-powered Automatic Roller lid press unit for pressing lids on half pint through 1 gallon containers.	The ABA-LPHSC-5 is a 5 gallon plastic and metal lid placer with a chute based design.	The ABA-RT-60-OUT is a 60 inch diameter out feed rotary table.	The ABA-COV-85QTSF is a cone style fill head with a 2 inch S-line inelt for filling quart and gallon cans and an additional flush attachment.	The ABA-COV-85A is a cone style fill head with a 2 inch S-line inlet which is designed to fill gallon cans.	Bottom Fill Gravimetric Electronic Automatic eXplosion-Proof Liquid Filling Machines The ABA-FILL-BFGEA-X is an electronically controlled, automatic, explosion proof net weight filling machine which is designed to bottom fill containers from half pint to 5 gallon pails.
SKU	ABA-5GALL-04	ABA-5GALL-68	ABA-5GALL-71	609-AEW	5967K51	ABA-PMTR-06X08R1	94355A602	7113K454	FILL-TFxPS	FILL-TFGES	SKU	FILL-BFGES	PRESS-1NAR	LPHSC-5	RT-60-OUT	COV-85QTSF	COV-85A	FILL-BFGEA-X
Manufacturer	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	No	No	Manufacturer	No	No	No	No	No	No	No
Notes	DateUpdated:9/1/2015 10:34:57, PartUpdatedBy:AnthonyBarber,ManufacturerNumber:2134, PartPurchaseInstructions:Carolina Seal $9/25 $7.90/50 8.11.14, AltSupplier:Seelye Quote SQ01032364 4/9/13 $15.50/25, LeadTime:8.1.14 RFQ Barry Carolina Seal, OemMargin:2.50, Location:09-03-02,StockUsedSince:5/96, UnUsedItem:0, MinimumStockLevel:15, OnOrder:0, OrderDate:8/13/2015, #ABA-00010790P, Qty=25, PartReOrderQty:25, PartLength:0.00, PartPackQty:0, PartWeight:0.03, PartRegularOrder:1, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/19/2015 11:28:28, PartStockCheckedBy:ChristopherBarber,	DateUpdated:8/5/2015 13:31:19, PartUpdatedBy:KirstyGaus,ManufacturerNumber:393, AltSupplier:wisc. $4,812.50 tool $271.49/25 mach $70.60 tool $2,100, ABA-5GALL-64 Casting, LeadTime:9/14 $459.20 plus surcharge $10.16 total $469.36 7/15 $3.665 surcharge, ThieleSalesPrice:3/06 $396.34 plus surcharges final price in 2006 with freight is $427.79, OemMargin:5.00, Location:Overflow rack 4 shelf 2 right, Notes:1.11.10 $445.83/10 or 12 $414.27/22 Surchage 1.74# = #18.10 $463.93 $432.37,UnUsedItem:0, MinimumStockLevel:2, OnOrder:0, OrderDate:5/28/2015, #ABA-00010473P, Qty=16, PartReOrderQty:6, PartLength:0.00, PartPackQty:0, PartWeight:8.40, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:9/11/2014 15:44:56, PartStockCheckedBy:KirstyGaus,	DateUpdated:8/19/2015 14:14:32,ManufacturerNumber:377, AltSupplier:Qualitek AAAQ7314 $136/10 12/02/2010 Cheetah $86/10 12.13.10, LeadTime:14WMP 29-355 Short welding ferrule, 3 S-line $9.48, ThieleSalesPrice:Stock Check 7/16/12, OemMargin:0.00, Location:10-06-07, Notes:Griffin $129/10,UnUsedItem:0, MinimumStockLevel:4, OnOrder:0, OrderDate:8/22/2011, #ABA-00004976P, Qty=10, PartReOrderQty:10, PartLength:0.00, PartPackQty:0, PartWeight:3.10, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/19/2015 14:14:32, PartStockCheckedBy:ChristopherBarber,	DateUpdated:8/11/2015 12:41:30, PartUpdatedBy:KirstyGaus,ManufacturerNumber:5, PartPurchaseInstructions:McMc Quote 11960006-00 $599.31, OemMargin:0.00, Notes:Revere 9/05 443.623 3/08 $519.00,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, OrderDate:7/30/2015, #ABA-00010736P, Qty=1, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:6.40, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00,	DateUpdated:9/3/2014 15:29:00, PartUpdatedBy:SimonWalker,ManufacturerNumber:1683, AltSupplier:5967K81 Mc Master $31.63 Weimer 7/11 alternative is $19.87, OemMargin:0.00, Location:17-01-00, Notes:Kaman Quote M276850 25.29 each,UnUsedItem:0, MinimumStockLevel:2, OnOrder:0, OrderDate:7/31/2013, #ABA-00007751P, Qty=2, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:0.93, PartRegularOrder:1, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:9/3/2014 15:29:00, PartStockCheckedBy:KirstyGaus,	DateAdded:6/13/2008 13:03:50, DateUpdated:5/28/2015 10:49:00, PartUpdatedBy:KirstyGaus,ManufacturerNumber:1798, AltSupplier:see B08-U05-10A for SS tie rods only, LeadTime:F1AU-10A1W-AU00 SS tie rods and flange $488.59 ABA-2000-MF1-FLANGE, ThieleSalesPrice:Seal kit P/N ABA-PMTR-06X08R1-SKT, OemMargin:2.00, Location:Overflow Rack 2-1, Notes:Numatics F1AU-10A1W-A1C0 $395.62 11/09 c-Steel tie rods and flange,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, OrderDate:5/19/2015, #ABA-00010446P, Qty=1, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:41.00, PartRegularOrder:1, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:7/23/2013 15:49:52, PartStockCheckedBy:ChristopherBarber,	DateAdded:4/21/2009 13:43:09, DateUpdated:7/7/2015 14:52:11, PartUpdatedBy:JacquelineTwigg,ManufacturerNumber:540, ThieleSalesPrice:Stock Check 6/24/13, OemMargin:0.00, Location:Blue-C-660,UnUsedItem:0, MinimumStockLevel:2, OnOrder:0, OrderDate:4/21/2009, #ABA-00002556P, Qty=1, PartReOrderQty:0, PartLength:0.00, PartPackQty:10, PartWeight:0.00, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:7/7/2015 14:52:11, PartStockCheckedBy:ChristineBarber,	DateAdded:7/9/2010 8:49:04, DateUpdated:3/12/2015 13:11:21, PartUpdatedBy:KirstyGaus,ManufacturerNumber:540, OemMargin:0.00, Location:Ferrules overflow 19-06,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, OrderDate:3/9/2015, #ABA-00010200P, Qty=1, PartReOrderQty:0, PartLength:0.00, PartPackQty:50, PartWeight:0.00, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00,	No	No	Notes	No	No	No	N/A	No	N/A	No