Compare Products

Print This Page


	PRESS-1NAR	PRESS-5NAR	LPHSC-5	FILL-TFxPA	LDHS	RT-60-IN	91352A157	COV-85QTS	TFGES-DRUM
Description	The ABA-PRESS-1NAR is a standard 1 gallon Non-powered Automatic Roller lid press unit. Features: Hand crank with chain and sprockets allows for full height adjustment from half pint through 1 gallon (5 liter) containers. 19 x 1 inch diameter gradually declining steel rollers to firmly press on lids. Rollers have 1/4 inch thick steel walls and are mounted on 1/4 inch stainless steel shafts using 2 x 1/4 inch double shielded bearings. Stainless steel sheet metal guard covers chain and sprockets.	The ABA-PRESS-5NAR is a standard 5 gallon Non-powered Automatic Roller lid press unit. Features: Hand crank with chain and sprockets allows for full height adjustment from pint through 6 gallon pails. 32 x 1 inch diameter steel rollers gradually declining steel rollers to firmly press on lids Rollers have 1/4 inch thick stainless steel walls and are mounted on 1/4 inch stainless steel shafts using 2 x 1/4 inch double shielded bearings. Stainless steel sheet metal guard covers chain and sprockets. Press available as washdown capable - fully stainless steel with stainless steel washdown motor. See photo number 2 above (M399)	The ABA-LPHSC-5 is 5 gallon plastic and metal lid placer with a chute based design. This unit self-centers the lids on the containers as they pass below it. Features: Adjustable release paddles allow for the placement of round, square, and rectangular lids. Automatic lid priming keeps the lid chute full and ready for the next container In feed line stops automatically space incoming containers Low lid stack notifications Automatically stops containers when unit is out of lids.	Top Fill Volumetric Pneumatic Automatic Liquid Filling Machines The ABA-FILL-TFxPA is designed to fill open top containers. Our double acting positive displacement piston pumps are faster and have a longer life than single acting pumps as both sides of the piston are flooded with liquid at all times. Features: Fills open top containers One or five gallon double acting pumps Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails Pneumatic controls (can be used in both hazardous and non-hazardous areas) Fully automatic One, two, three or four fill stations	Our LDHS lid dropper unit is a high speed lid dropper for metal and plastic lids which mounts to all ABA lid press units (i.e. not a stand-alone unit; must be mounted to press). The star-wheel sets are designed to center the lids before the containers pass underneath the press. Features: Adjustable from ½ pint through gallon containers (maximum diameter 7 inches) Simple size changeover using ratchet handles, no tools required Simple height adjustment via lid press crank handle Interchangeable star-wheel sets for lid alignment Speeds of 60+ lids per minute Standard vertical lid hopper of 24 inch capacity Optional 72 inch down-stacker for extra capacity (shown above in far right photo) Pneumatic or electronic controls.	The ABA-RT-60-IN is a 60 inch diameter in feed rotary table. When used as part of an automated line, it allows operators to pre-load large quantities of containers at the start of the line to enhance and speed up the filling process. Features: Container alignment paddles ensure that containers are fed into the conveyor one by one. Constructed from stainless steel with a plated circular feed table Container contact points are equipped with Teflon runners to prevent marking containers	Button-Head Socket Cap Screw, M8 Size, 35mm Long, Zinc Plated, fully threaded	The ABA-COV-85QTS is a cone style fill head with a 2 inch S-line inlet and a 1.85 inch diameter outlet for filling quart and gallon cans.	The ABA-TFGES-DRUM is an electronically controlled, top fill, net weight, semi-automatic filling machine designed to fill drums. Simple clean up with only two ball valves and fill head as wetted parts. Features: Fills open top containers High accuracy Electronic controls Semi-automatic
Short Description	The ABA-PRESS-1NAR is a standard 1 gallon Non-powered Automatic Roller lid press unit for pressing lids on half pint through 1 gallon containers.	The ABA-PRESS-5NAR is a standard 5 gallon Non-powered Automatic Roller lid press unit for pressing lids on pint through 6 gallon pails.	The ABA-LPHSC-5 is a 5 gallon plastic and metal lid placer with a chute based design.	Top Fill Volumetric Pneumatic Automatic Liquid Filling Machines The ABA-FILL-TFxPA is a pneumatically controlled, automatic, volumetric machine which is designed to top fill open top containers utilizing one or five gallon double acting pumps.	The ABA-LDHS lid dropper unit is a high speed lid dropper for metal and plastic lids which mounts to all ABA lid press units and can drop lids from 1/2 pint through 1 gallon.	The ABA-RT-60-IN is a 60 inch diameter in feed rotary table.	Button-Head Socket Cap Screw, M8 Size, 35mm Long, Zinc Plated, fully threaded	The ABA-COV-85QTS is a cone style fill head with a 2 inch S-line inlet and a 1.85 inch diameter outlet for filling quart and gallon cans.	The ABA-TFGES-DRUM is an electronically controlled, top fill, net weight, semi-automatic filling machine designed to fill drums.
SKU	PRESS-1NAR	PRESS-5NAR	LPHSC-5	FILL-TFxPA	LDHS	RT-60-IN	91352A157	COV-85QTS	TFGES-DRUM
Manufacturer	No	No	No	No	No	No	N/A	No	No
Notes	No	No	No	No	No	N/A	DateAdded:2/5/2014 11:36:56, DateUpdated:8/7/2015 14:15:37, PartUpdatedBy:RussellGentry,ManufacturerNumber:540, OemMargin:0.00, Location:Red-A-1192,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, PartReOrderQty:0, PartLength:0.00, PartPackQty:10, PartWeight:0.06, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:7/14/2015 15:00:51, PartStockCheckedBy:ChristineBarber,	N/A	No