Compare Products

Print This Page


	103237B07	ABA-5GALL-04	ABA-5GALL-68	ABA-5GALL-71	5967K51	4273T81	ABA-PMTR-06X08R1	700-HN128	FILL-BFxEA	FILL-TFGES		PRESS-1NAR	ABA-SCALE-0082	LDHS	RT-60-OUT	COV-85QTSF	COV-BC-0.75x19	COV-BC-1.25x19	2000-GCV	99-PCV	TFGES-DRUM		PRESS-5GALL-P	COV-85BO	COV-85QTS-2STAGE
Description	91102A031,3/8 LOCKWASHER,92146A031,18-8 Stainless Steel Split Lock Washer 3/8” Screw Size, .68” OD, .09” min Thick	128891B,128891,ABA-5GALL-04-RevC,5 Gallon Teflon End Seal,5 galones de tefl”n Seal End	ABA-5GALL-64 Rev A and ABA-5GALL-68 Rev E casting drg.,Tee 5 Gallon pump	ABA-5GALL-71 Rev F,Check valve cylinder mount, 5 gallon pump, 4 x 10-24 threads.	5967K81,UCLF202-10,Cast Iron Flange-Mounted Steel Ball Bearing 4 Bolt Square Flange for 5/8” Shaft Dia, 3” Base L, for starwheel	Metric Phenolic Six-Lobe Knob, M6 X 1.0 Threaded Thru Hole, 40MM Dia	129315C,F1AU-10A1W-AU00,Air motor for 5 gallon pump, A Series, Front Flange Mount, 6 diameter x 10 inch stroke, Std rod 1.275 Rod Dia, Style 1 (1-14 Male Thds) 1/2 NPTF Port, no cushions, 1A-Rod Ext 4.0, BC Bumper Cap with SS Tie rods and SS Rod, 1/2-20 thread tie rods	Relay Socket, 4 PDT, General Purpose, use with Relay 700-HC24Z24-4	Bottom Fill Volumetric Electronic Automatic Liquid Filling Machine The ABA-FILL-BF Bottom Fill Series are designed to fill below the level of the liquid to minimize foaming. Submerging the fill nozzle beneath the product as it is filling prevents air in the product, and helps to eliminate foaming. This in turn allows the products to be filled more quickly. Available with one gallon or five gallon double acting volumetric pumps, each container is filled quickly as the diving lance monitors the product inside the container and submerges the nozzle beneath the liquid surface. The diving lance is lowered into the bottom of the container and is slowly raised as the container is filled with liquid. We offer two methods of raising the fill lance, either with a Servo motor or an air cylinder. Features: Dual mode top fill / bottom fill filling machine Electronic fully adjustable fill head carriage is accurate to within 1/16" inch Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails PLC controls Fully automatic One, two, three or four fill stations Continuously running conveyor Available explosion proof rating (Class 1, Division 1 or Class 1, Division 2)	Top Fill Gravimetric Electronic Semi-Automatic Liquid Filling Machines The ABA-FILL-TF Top Fill Series are designed to fill open top containers from half pint through 5 gallon. Simple clean-up with only two ball valves and a fill head as wetted parts. Features: Fills open top containers High accuracy Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails Electronic controls Semi- automatic One or two fill stations Available explosion proof rating (Class 1, Division 1 or Class 1, Division 2)	Description	The ABA-PRESS-1NAR is a standard 1 gallon Non-powered Automatic Roller lid press unit. Features: Hand crank with chain and sprockets allows for full height adjustment from half pint through 1 gallon (5 liter) containers. 19 x 1 inch diameter gradually declining steel rollers to firmly press on lids. Rollers have 1/4 inch thick steel walls and are mounted on 1/4 inch stainless steel shafts using 2 x 1/4 inch double shielded bearings. Stainless steel sheet metal guard covers chain and sprockets.	ABA-SCALE-0082-RevB,Scale Riser Plates	Our LDHS lid dropper unit is a high speed lid dropper for metal and plastic lids which mounts to all ABA lid press units (i.e. not a stand-alone unit; must be mounted to press). The star-wheel sets are designed to center the lids before the containers pass underneath the press. Features: Adjustable from ½ pint through gallon containers (maximum diameter 7 inches) Simple size changeover using ratchet handles, no tools required Simple height adjustment via lid press crank handle Interchangeable star-wheel sets for lid alignment Speeds of 60+ lids per minute Standard vertical lid hopper of 24 inch capacity Optional 72 inch down-stacker for extra capacity (shown above in far right photo) Pneumatic or electronic controls.	The ABA-RT-60-OUT is a 60 inch diameter out feed rotary table. When used as part of an automated line, it collates containers as they come off the conveyor and allows for a large quantity of containers to sit until they are ready to be moved forward to the next stage of the process. Features: Constructed from stainless steel with a plated circular feed table Container contact points are equipped with Teflon runners to prevent marking containers Stainless steel packaging table topped with UHMW plastic allows for easy removal of filled containers	The ABA-COV-85QTSF is a cone style fill head with a 2 inch S-line inlet for filling quart and gallon cans and an additional flush attachment. Product Specifications: 2 inch S-line inlet 1.85 inch diameter outlet 2.5 inch diameter flush flange	The ABA-COV-BC-0.75x19 is a diving lance style fill head with a 0.75 inch outer diameter and a 19 inch fill lance which is designed to bottom fill containers.	The ABA-COV-BC-1.25x19 is a diving probe style fill head with a 1.25 inch outer diameter and a 19 inch lance size. This fill head is designed to bottom fill containers.	The ABA-2000-GCV is a 5 gallon double acting piston pump assembly with gravity check valves. Product Features: Cast iron end caps, elbows and tees Stroke adjustment handle Quick and simple maintenance Stainless steel and Teflon wetted parts	The ABA-99-PCV is a one gallon double acting piston pump with powered check valves. Product Features: Cast end caps, tees, and elbows Stainless steel and Teflon wetted parts Quick release clamps for ease of maintenance Power check valves eliminate the need for filter tubs Can fill from half pint to 5 quarts in a single cycle	The ABA-TFGES-DRUM is an electronically controlled, top fill, net weight, semi-automatic filling machine designed to fill drums. Simple clean up with only two ball valves and fill head as wetted parts. Features: Fills open top containers High accuracy Electronic controls Semi-automatic	Description	The ABA-PRESS-5GALL-P is a powered lid press primarily designed for closing 5 gallon pails, but will also close 1 gallon pails. Features: Hand crank with chain and sprockets allows for height adjustment Stainless steel sheet metal guard covers chain and sprockets 5 lead in rollers and 6 powered rollers firmly press lids on	ABA-COV-85BO is a cone fill head with 2 inch S-Line inlet featuring air shear or NO2 blanket technology. The forced air helps to blow off or shear a high viscosity product when the fill is completed.	ABA-COV-85QTS-2STAGE is a two stage, cone style fill head with a 2 inch S-Line inlet and a 1.85 inch diameter outlet for filling quart and gallon cans. A 2 stage fill head eliminates the need for a ball valve because it opens fully at the beginning of a fill and then closes part way in order to dribble for the end of the fill before closing completely when the fill is complete.
Short Description	91102A031,3/8 LOCKWASHER,92146A031,18-8 Stainless Steel Split Lock Washer 3/8” Screw Size, .68” OD, .09” min Thick	128891B,128891,ABA-5GALL-04-RevC,5 Gallon Teflon End Seal,5 galones de tefl”n Seal End	ABA-5GALL-64 Rev A and ABA-5GALL-68 Rev E casting drg.,Tee 5 Gallon pump	ABA-5GALL-71 Rev F,Check valve cylinder mount, 5 gallon pump, 4 x 10-24 threads.	5967K81,UCLF202-10,Cast Iron Flange-Mounted Steel Ball Bearing 4 Bolt Square Flange for 5/8” Shaft Dia, 3” Base L, for starwheel	Metric Phenolic Six-Lobe Knob, M6 X 1.0 Threaded Thru Hole, 40MM Dia	129315C,F1AU-10A1W-AU00,Air motor for 5 gallon pump, A Series, Front Flange Mount, 6 diameter x 10 inch stroke, Std rod 1.275 Rod Dia, Style 1 (1-14 Male Thds) 1/2 NPTF Port, no cushions, 1A-Rod Ext 4.0, BC Bumper Cap with SS Tie rods and SS Rod, 1/2-20 thread tie rods	Relay Socket, 4 PDT, General Purpose, use with Relay 700-HC24Z24-4	Bottom Fill Volumetric Electronic Automatic Liquid Filling Machine The ABA-FILL-BFxEA machine is an electronically controlled, fully automatic, volumetric machine which is designed to bottom fill half pint cans through 5 gallon pails.	Top Fill Gravimetric Electronic Semi-Automatic Liquid Filling Machines The ABA-FILL-TFGES is an electronically controlled, net weight, semi-automatic filling machine which is designed to top fill half pint through 5 gallon containers.	Short Description	The ABA-PRESS-1NAR is a standard 1 gallon Non-powered Automatic Roller lid press unit for pressing lids on half pint through 1 gallon containers.	ABA-SCALE-0082-RevB,Scale Riser Plates	The ABA-LDHS lid dropper unit is a high speed lid dropper for metal and plastic lids which mounts to all ABA lid press units and can drop lids from 1/2 pint through 1 gallon.	The ABA-RT-60-OUT is a 60 inch diameter out feed rotary table.	The ABA-COV-85QTSF is a cone style fill head with a 2 inch S-line inelt for filling quart and gallon cans and an additional flush attachment.	The ABA-COV-BC-0.75x19 is a diving lance style fill head which is designed to bottom fill containers.	The ABA-COV-BC-1.25x19 is a diving probe style fill head which is designed to bottom fill containers.	The ABA-2000-GCV is a 5 gallon double acting piston pump assembly with gravity check valves.	The ABA-99-PCV is a one gallon double acting piston pump with powered check valves.	The ABA-TFGES-DRUM is an electronically controlled, top fill, net weight, semi-automatic filling machine designed to fill drums.	Short Description	The ABA-PRESS-5GALL-P is a powered lid press unit.	ABA-COV-85BO is a cone fill head with air shear.	ABA-COV-85QTS-2STAGE is a two stage, cone style fill head with a 2 inch S-Line inlet and a 1.85 inch diameter outlet for filling quart and gallon cans.
SKU	103237B07	ABA-5GALL-04	ABA-5GALL-68	ABA-5GALL-71	5967K51	4273T81	ABA-PMTR-06X08R1	700-HN128	FILL-BFxEA	FILL-TFGES	SKU	PRESS-1NAR	ABA-SCALE-0082	LDHS	RT-60-OUT	COV-85QTSF	COV-BC-0.75x19	COV-BC-1.25x19	2000-GCV	99-PCV	TFGES-DRUM	SKU	PRESS-5GALL-P	COV-85BO	COV-85QTS-2STAGE
Manufacturer	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	No	No	Manufacturer	No	N/A	No	No	No	No	No	No	No	No	Manufacturer	No	No	No
Notes	DateUpdated:8/26/2015 17:44:16, PartUpdatedBy:AnthonyBarber,ManufacturerNumber:540, AltSupplier:Universal 50-710-037, OemMargin:0.00, Location:Red-A-10, Notes:McMaster 92146A031 8.01/100pk,UnUsedItem:0, MinimumStockLevel:100, OnOrder:0, OrderDate:8/13/2015, #ABA-00010780P, Qty=2, PartReOrderQty:200, PartLength:0.00, PartPackQty:100, PartWeight:0.01, PartRegularOrder:1, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:7/9/2015 14:18:29, PartStockCheckedBy:ChristineBarber,	DateUpdated:9/1/2015 10:34:57, PartUpdatedBy:AnthonyBarber,ManufacturerNumber:2134, PartPurchaseInstructions:Carolina Seal $9/25 $7.90/50 8.11.14, AltSupplier:Seelye Quote SQ01032364 4/9/13 $15.50/25, LeadTime:8.1.14 RFQ Barry Carolina Seal, OemMargin:2.50, Location:09-03-02,StockUsedSince:5/96, UnUsedItem:0, MinimumStockLevel:15, OnOrder:0, OrderDate:8/13/2015, #ABA-00010790P, Qty=25, PartReOrderQty:25, PartLength:0.00, PartPackQty:0, PartWeight:0.03, PartRegularOrder:1, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/19/2015 11:28:28, PartStockCheckedBy:ChristopherBarber,	DateUpdated:8/5/2015 13:31:19, PartUpdatedBy:KirstyGaus,ManufacturerNumber:393, AltSupplier:wisc. $4,812.50 tool $271.49/25 mach $70.60 tool $2,100, ABA-5GALL-64 Casting, LeadTime:9/14 $459.20 plus surcharge $10.16 total $469.36 7/15 $3.665 surcharge, ThieleSalesPrice:3/06 $396.34 plus surcharges final price in 2006 with freight is $427.79, OemMargin:5.00, Location:Overflow rack 4 shelf 2 right, Notes:1.11.10 $445.83/10 or 12 $414.27/22 Surchage 1.74# = #18.10 $463.93 $432.37,UnUsedItem:0, MinimumStockLevel:2, OnOrder:0, OrderDate:5/28/2015, #ABA-00010473P, Qty=16, PartReOrderQty:6, PartLength:0.00, PartPackQty:0, PartWeight:8.40, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:9/11/2014 15:44:56, PartStockCheckedBy:KirstyGaus,	DateUpdated:8/19/2015 14:14:32,ManufacturerNumber:377, AltSupplier:Qualitek AAAQ7314 $136/10 12/02/2010 Cheetah $86/10 12.13.10, LeadTime:14WMP 29-355 Short welding ferrule, 3 S-line $9.48, ThieleSalesPrice:Stock Check 7/16/12, OemMargin:0.00, Location:10-06-07, Notes:Griffin $129/10,UnUsedItem:0, MinimumStockLevel:4, OnOrder:0, OrderDate:8/22/2011, #ABA-00004976P, Qty=10, PartReOrderQty:10, PartLength:0.00, PartPackQty:0, PartWeight:3.10, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/19/2015 14:14:32, PartStockCheckedBy:ChristopherBarber,	DateUpdated:9/3/2014 15:29:00, PartUpdatedBy:SimonWalker,ManufacturerNumber:1683, AltSupplier:5967K81 Mc Master $31.63 Weimer 7/11 alternative is $19.87, OemMargin:0.00, Location:17-01-00, Notes:Kaman Quote M276850 25.29 each,UnUsedItem:0, MinimumStockLevel:2, OnOrder:0, OrderDate:7/31/2013, #ABA-00007751P, Qty=2, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:0.93, PartRegularOrder:1, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:9/3/2014 15:29:00, PartStockCheckedBy:KirstyGaus,	DateUpdated:8/14/2015 15:19:26,ManufacturerNumber:540, ThieleSalesPrice:Stock Check 7/6/12, OemMargin:0.00, Location:04-05-13, Notes:Mcmasterr Carr used on M170 SAF-1S with container guide,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, OrderDate:9/20/2007, #ABA-00001030P, Qty=2, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:0.06, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/14/2015 15:19:26, PartStockCheckedBy:KirstyGaus,	DateAdded:6/13/2008 13:03:50, DateUpdated:5/28/2015 10:49:00, PartUpdatedBy:KirstyGaus,ManufacturerNumber:1798, AltSupplier:see B08-U05-10A for SS tie rods only, LeadTime:F1AU-10A1W-AU00 SS tie rods and flange $488.59 ABA-2000-MF1-FLANGE, ThieleSalesPrice:Seal kit P/N ABA-PMTR-06X08R1-SKT, OemMargin:2.00, Location:Overflow Rack 2-1, Notes:Numatics F1AU-10A1W-A1C0 $395.62 11/09 c-Steel tie rods and flange,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, OrderDate:5/19/2015, #ABA-00010446P, Qty=1, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:41.00, PartRegularOrder:1, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:7/23/2013 15:49:52, PartStockCheckedBy:ChristopherBarber,	DateAdded:1/23/2012 8:28:46, DateUpdated:8/21/2015 14:15:48, PartUpdatedBy:KirstyGaus,ManufacturerNumber:5, OemMargin:0.00, Location:21-03-05, Notes:McMc Quote 11842767-00 01/12 $9.22,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, OrderDate:9/17/2014, #ABA-00009656P, Qty=5, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:0.09, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/21/2015 14:15:48, PartStockCheckedBy:ChristopherBarber,	No	No	Notes	No	DateAdded:3/20/2014 14:40:44, DateUpdated:8/19/2015 14:27:21, PartUpdatedBy:KirstyGaus,ManufacturerNumber:2018, PartPurchaseInstructions:6=47 12=43 18=42, OemMargin:0.00, Location:10-01-06, Notes:quote #13663,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, OrderDate:8/8/2014, #ABA-00009442P, Qty=6, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:5.80, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/19/2015 14:27:21, PartStockCheckedBy:ChristopherBarber,	No	N/A	No	N/A	N/A	No	No	No	Notes	No	No	No

Compare Products

Features: