Compare Products

128891B,128891,ABA-5GALL-04-RevC,5 Gallon Teflon End Seal,5 galones de tefl”n Seal End

Bottom Fill Gravimetric Electronic Automatic Liquid Filling Machines

The ABA-FILL-BF Bottom Fill Series are designed to fill below the level of the liquid to minimize foaming. Submerging the fill nozzle beneath the product as it is filling prevents air in the product, and helps to eliminate foaming. This in turn allows the products to be filled more quickly.

The diving lance is lowered into the bottom of the container and is slowly raised as the container is filled with liquid, continually keeping the fill lance submerged. We offer two methods of raising the fill lance, either with a servo motor or an air cylinder.

Features:

• Fills restricted opening containers (screw caps) as well as open top containers
• High accuracy
• Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails
• Electronic controls
• Fully automatic
• One, two. three or four fill stations
• Available explosion proof rating (Class 1, Division 1 or Class 1, Division 2)

Top Fill Volumetric Pneumatic Automatic Liquid Filling Machines

The ABA-FILL-TFxPA is designed to fill open top containers. Our double acting positive displacement piston pumps are faster and have a longer life than single acting pumps as both sides of the piston are flooded with liquid at all times.

Features:

• Fills open top containers
• One or five gallon double acting pumps
• Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails
• Pneumatic controls (can be used in both hazardous and non-hazardous areas)
• Fully automatic
• One, two, three or four fill stations

ABA-SCALE-0082-RevB,Scale Riser Plates

Our LDHS lid dropper unit is a high speed lid dropper for metal and plastic lids which mounts to all ABA lid press units (i.e. not a stand-alone unit; must be mounted to press). The star-wheel sets are designed to center the lids before the containers pass underneath the press.

Features:

• Adjustable from ½ pint through gallon containers (maximum diameter 7 inches)
• Simple size changeover using ratchet handles, no tools required
• Simple height adjustment via lid press crank handle
• Interchangeable star-wheel sets for lid alignment
• Speeds of 60+ lids per minute
• Standard vertical lid hopper of 24 inch capacity
• Optional 72 inch down-stacker for extra capacity (shown above in far right photo)
• Pneumatic or electronic controls. 

The ABA-LPHSC-V is a 5 gallon plastic or metal lid placer. This unit has an ergonomically low loading conveyor which is especially beneficial for higher speed applications and loading heavy metal lids. Stacks of lids are conveyed into the lid stacker, raised, and rotated to the escapement chute. This unit self-centers the lids on the containers as they pass below it.

Features:

• 5 gallon plastic and metal lids
• Stack, lift and load assembly
• Rotary transfer assembly
• Vertical stack escapement assembly
• Adjustable release paddles allow for the placement of round, square, and rectangular lids.
• Automatic lid priming keeps the lid chute full and ready for the next container
• In feed line stops automatically space incoming containers
• Low lid stack notifications
• Automatically stops containers when unit is out of lids.

The ABA-RT-60-IN is a 60 inch diameter in feed rotary table. When used as part of an automated line, it allows operators to pre-load large quantities of containers at the start of the line to enhance and speed up the filling process.

Features:

• Container alignment paddles ensure that containers are fed into the conveyor one by one.
• Constructed from stainless steel with a plated circular feed table
• Container contact points are equipped with Teflon runners to prevent marking containers

The ABA-RT-60-OUT is a 60 inch diameter out feed rotary table. When used as part of an automated line, it collates containers as they come off the conveyor and allows for a large quantity of containers to sit until they are ready to be moved forward to the next stage of the process.

Features:

• Constructed from stainless steel with a plated circular feed table
• Container contact points are equipped with Teflon runners to prevent marking containers
• Stainless steel packaging table topped with UHMW plastic allows for easy removal of filled containers 

Button-Head Socket Cap Screw, M8 Size, 35mm Long, Zinc Plated, fully threaded

The ABA-COV-85QTS is a cone style fill head with a 2 inch S-line inlet and a 1.85 inch diameter outlet for filling quart and gallon cans. 

The ABA-COV-85QTSF is a cone style fill head with a 2 inch S-line inlet for filling quart and gallon cans and an additional flush attachment.

Product Specifications:

• 2 inch S-line inlet
• 1.85 inch diameter outlet
• 2.5 inch diameter flush flange

The ABA-COV-BC-0.75x19 is a diving lance style fill head with a 0.75 inch outer diameter and a 19 inch fill lance which is designed to bottom fill containers. 

The ABA-COV-BC-1.25x19 is a diving probe style fill head with a 1.25 inch outer diameter and a 19 inch lance size. This fill head is designed to bottom fill containers.

The ABA-COV-BC-ASSY-SML-11-16 is a diving probe style fill head which is designed to bottom fill containers. This fill head has an 11/16 inch outer diameter and a 14.5 inch fill lance.

The ABA-PLCR-CHUTE is a semi-automatic lid placer chute for both plastic and metal lids. This design provides a good middle ground between a fully automatic lid placer and having an operator manually place lids one by one. This chute allows the operator to pre-load lids and then step away to work on other machine components before it is necessary to replenish the chute.

128891B,128891,ABA-5GALL-04-RevC,5 Gallon Teflon End Seal,5 galones de tefl”n Seal End

 Bottom Fill Gravimetric Electronic Automatic Liquid Filling Machines

The ABA-FILL-BFGEA is an electronically controlled, automatic, net weight filling machine which is designed to bottom fill containers from half pint to 5 gallon pails.

Top Fill Volumetric Pneumatic Automatic Liquid Filling Machines

The ABA-FILL-TFxPA is a pneumatically controlled, automatic, volumetric machine which is designed to top fill open top containers utilizing one or five gallon double acting pumps.

ABA-SCALE-0082-RevB,Scale Riser Plates

 The ABA-LDHS lid dropper unit is a high speed lid dropper for metal and plastic lids which mounts to all ABA lid press units and can drop lids from 1/2 pint through 1 gallon.

 The ABA-LPHSC-V is a 5 gallon plastic or metal lid placer with a stack, lift, and load assembly and an escapement chute.

 The ABA-RT-60-IN is a 60 inch diameter in feed rotary table.

The ABA-RT-60-OUT is a 60 inch diameter out feed rotary table. 

Button-Head Socket Cap Screw, M8 Size, 35mm Long, Zinc Plated, fully threaded

The ABA-COV-85QTS is a cone style fill head with a 2 inch S-line inlet and a 1.85 inch diameter outlet for filling quart and gallon cans. 

The ABA-COV-85QTSF is a cone style fill head with a 2 inch S-line inelt for filling quart and gallon cans and an additional flush attachment.

The ABA-COV-BC-0.75x19 is a diving lance style fill head which is designed to bottom fill containers. 

The ABA-COV-BC-1.25x19 is a diving probe style fill head which is designed to bottom fill containers.

The ABA-COV-BC-ASSY-SML-11-16 is a diving probe style fill head which is designed to bottom fill containers.

The ABA-PLCR-CHUTE is a semi-automatic lid placer chute for both plastic and metal lids.

ABA-5GALL-04

FILL-BFGEA

FILL-TFxPA

ABA-SCALE-0082

LDHS

LPHSC-V

RT-60-IN

RT-60-OUT

91352A157

COV-85QTS

COV-85QTSF

COV-BC-0.75x19

COV-BC-1.25x19

COV-BC-ASSY-SML-11-16

PLCR-CHUTE

N/A

No

No

N/A

No

No

No

No

N/A

No

No

No

No

No

No

DateUpdated:9/1/2015 10:34:57, PartUpdatedBy:AnthonyBarber,ManufacturerNumber:2134, PartPurchaseInstructions:Carolina Seal $9/25 $7.90/50 8.11.14, AltSupplier:Seelye Quote SQ01032364 4/9/13 $15.50/25, LeadTime:8.1.14 RFQ Barry Carolina Seal, OemMargin:2.50, Location:09-03-02,StockUsedSince:5/96, UnUsedItem:0, MinimumStockLevel:15, OnOrder:0, OrderDate:8/13/2015, #ABA-00010790P, Qty=25, PartReOrderQty:25, PartLength:0.00, PartPackQty:0, PartWeight:0.03, PartRegularOrder:1, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/19/2015 11:28:28, PartStockCheckedBy:ChristopherBarber,

No

No

DateAdded:3/20/2014 14:40:44, DateUpdated:8/19/2015 14:27:21, PartUpdatedBy:KirstyGaus,ManufacturerNumber:2018, PartPurchaseInstructions:6=47 12=43 18=42, OemMargin:0.00, Location:10-01-06, Notes:quote #13663,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, OrderDate:8/8/2014, #ABA-00009442P, Qty=6, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:5.80, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/19/2015 14:27:21, PartStockCheckedBy:ChristopherBarber,

No

No

N/A

N/A

DateAdded:2/5/2014 11:36:56, DateUpdated:8/7/2015 14:15:37, PartUpdatedBy:RussellGentry,ManufacturerNumber:540, OemMargin:0.00, Location:Red-A-1192,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, PartReOrderQty:0, PartLength:0.00, PartPackQty:10, PartWeight:0.06, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:7/14/2015 15:00:51, PartStockCheckedBy:ChristineBarber,

N/A

No

N/A

N/A

N/A

No