Compare Products

A0333C1-RX(4)-UC-LF-CT ,Five Gallon air motor, 6” diameter x 10” stroke, replaced by ABA-PMTR-06X08R1, new part is fully interchangeable.

ABA-COV-87A Rev B,Valve foot, 2.875 Outlet, Gallon cone nozzle, reduced 1/2 diameter,V”lvula de pie, 2,875 Outlet, boquilla de cono galones, redujo 1/2 di”metro

5967K81,UCLF202-10,Cast Iron Flange-Mounted Steel Ball Bearing 4 Bolt Square Flange for 5/8” Shaft Dia, 3” Base L, for starwheel

129315C,F1AU-10A1W-AU00,Air motor for 5 gallon pump, A Series, Front Flange Mount, 6 diameter x 10 inch stroke, Std rod 1.275 Rod Dia, Style 1 (1-14 Male Thds) 1/2 NPTF Port, no cushions, 1A-Rod Ext 4.0, BC Bumper Cap with SS Tie rods and SS Rod, 1/2-20 thread tie rods

Relay Socket, 4 PDT, General Purpose, use with Relay 700-HC24Z24-4

Mounting Strap for Pneumatic Position Transmitter, P/N 33.21.326 8 - 100mm

Top Fill Gravimetric Electronic Semi-Automatic Liquid Filling Machines

The ABA-FILL-TF Top Fill Series are designed to fill open top containers from half pint through 5 gallon. Simple clean-up with only two ball valves and a fill head as wetted parts.

Features:

• Fills open top containers
• High accuracy
• Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails
• Electronic controls
• Semi- automatic
• One or two fill stations
• Available explosion proof rating (Class 1, Division 1 or Class 1, Division 2) 

Bottom Fill Gravimetric Electronic Semi-Automatic Liquid Filling Machines

The ABA-FILL-BF Bottom Fill Series are designed to fill below the level of the liquid to minimize foaming. Submerging the fill nozzle beneath the product as it is filling prevents air in the product, and helps to eliminate foaming. This in turn allows the products to be filled more quickly.

The diving lance is lowered into the bottom of the container and is slowly raised as the container is filled with liquid, continually keeping the fill lance submerged. We offer two methods of raising the fill lance, either with a servo motor or an air cylinder.

Features:

• Fills restricted opening containers (screw caps) as well as open top containers
• High accuracy
• Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails
• Electronic controls
• Semi-automatic
• One or two fill stations
• Available explosion proof rating (Class 1, Division 1 or Class 1, Division 2)

Top Fill Volumetric Pneumatic Automatic Liquid Filling Machines

The ABA-FILL-TFxPA is designed to fill open top containers. Our double acting positive displacement piston pumps are faster and have a longer life than single acting pumps as both sides of the piston are flooded with liquid at all times.

Features:

• Fills open top containers
• One or five gallon double acting pumps
• Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails
• Pneumatic controls (can be used in both hazardous and non-hazardous areas)
• Fully automatic
• One, two, three or four fill stations

ABA-SCALE-0082-RevB,Scale Riser Plates

Our LDHS lid dropper unit is a high speed lid dropper for metal and plastic lids which mounts to all ABA lid press units (i.e. not a stand-alone unit; must be mounted to press). The star-wheel sets are designed to center the lids before the containers pass underneath the press.

Features:

• Adjustable from ½ pint through gallon containers (maximum diameter 7 inches)
• Simple size changeover using ratchet handles, no tools required
• Simple height adjustment via lid press crank handle
• Interchangeable star-wheel sets for lid alignment
• Speeds of 60+ lids per minute
• Standard vertical lid hopper of 24 inch capacity
• Optional 72 inch down-stacker for extra capacity (shown above in far right photo)
• Pneumatic or electronic controls. 

The ABA-LPHSC-V is a 5 gallon plastic or metal lid placer. This unit has an ergonomically low loading conveyor which is especially beneficial for higher speed applications and loading heavy metal lids. Stacks of lids are conveyed into the lid stacker, raised, and rotated to the escapement chute. This unit self-centers the lids on the containers as they pass below it.

Features:

• 5 gallon plastic and metal lids
• Stack, lift and load assembly
• Rotary transfer assembly
• Vertical stack escapement assembly
• Adjustable release paddles allow for the placement of round, square, and rectangular lids.
• Automatic lid priming keeps the lid chute full and ready for the next container
• In feed line stops automatically space incoming containers
• Low lid stack notifications
• Automatically stops containers when unit is out of lids.

The ABA-RT-60-IN is a 60 inch diameter in feed rotary table. When used as part of an automated line, it allows operators to pre-load large quantities of containers at the start of the line to enhance and speed up the filling process.

Features:

• Container alignment paddles ensure that containers are fed into the conveyor one by one.
• Constructed from stainless steel with a plated circular feed table
• Container contact points are equipped with Teflon runners to prevent marking containers

The ABA-COV-BC-0.75x19 is a diving lance style fill head with a 0.75 inch outer diameter and a 19 inch fill lance which is designed to bottom fill containers. 

The ABA-2000-GCV is a 5 gallon double acting piston pump assembly with gravity check valves. 

Product Features:

• Cast iron end caps, elbows and tees
• Stroke adjustment handle
• Quick and simple maintenance
• Stainless steel and Teflon wetted parts

The ABA-80-GCV is a one gallon double acting piston pump with gravity check valves.

Product Features:

• Stainless steel and Teflon wetted parts
• Cast end caps, tees, and elbows
• Quick release clamps for ease of maintenance
• Fills from half pint to five quarts in a single cycle

The ABA-PRESS-5GALL-P is a powered lid press primarily designed for closing 5 gallon pails, but will also close 1 gallon pails.

Features:

• Hand crank with chain and sprockets allows for height adjustment
• Stainless steel sheet metal guard covers chain and sprockets
• 5 lead in rollers and 6 powered rollers firmly press lids on

Bottom Fill Gravimetric Electronic Automatic eXplosion-Proof Liquid Filling Machines

The ABA-FILL-BF Bottom Fill Series are designed to fill below the level of the liquid to minimize foaming and protect against exposure to static prone products. Submerging the fill nozzle beneath the product as it is filling prevents air in the product, and helps to eliminate foaming and static buildup. This in turn allows the products to be filled more quickly and in a safer manner.

On our bottom fill machines, the diving lance style fill head is lowered into the bottom of the container utilizing either a Servo motor or a pneumatic air cylinder. Both methods offer accurate and easily adjustable filling and tracking. Once the fill cycle starts, the fill carraige slowly rises, drawing the fill head(s) up as it goes. As the container is filled with liquid, the head of the fill lance remains submerged under the level of the liquid. These paint filling machines are highly accurate and will increase the efficiency of any plant.

Features:

• Fills restricted opening containers (screw caps) as well as open top containers 
• High accuracy 
• Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails 
• Electronic controls 
• Fully automatic 
• One to six fill stations
• Explosion proof for C1D1 or C1D2 area

Bottom Fill Volumetric Electronic Automatic eXplosion Proof Liquid Filling Machine

The ABA-FILL-BF Bottom Fill Series are designed to fill below the level of the liquid to minimize foaming. Submerging the fill nozzle beneath the product as it is filling prevents air in the product, and helps to eliminate foaming. This in turn allows the products to be filled more quickly. 

Available with one gallon or five gallon double acting volumetric pumps, each container is filled quickly as the diving lance monitors the product inside the container and submerges the nozzle beneath the liquid surface.

The diving lance is lowered into the bottom of the container and is slowly raised as the container is filled with liquid. We offer two methods of raising the fill lance, either with a Servo motor or an air cylinder.

Features:

• Dual mode top fill / bottom fill filling machine
• Electronic fully adjustable fill head carriage is accurate to within 1/16" inch
• Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails
• PLC controls
• Fully automatic
• One, two, three or four fill stations
• Continuously running conveyor

ABA-COV-85QTS-2STAGE is a two stage, cone style fill head with a 2 inch S-Line inlet and a 1.85 inch diameter outlet for filling quart and gallon cans. A 2 stage fill head eliminates the need for a ball valve because it opens fully at the beginning of a fill and then closes part way in order to dribble for the end of the fill before closing completely when the fill is complete.

A0333C1-RX(4)-UC-LF-CT ,Five Gallon air motor, 6” diameter x 10” stroke, replaced by ABA-PMTR-06X08R1, new part is fully interchangeable.

ABA-COV-87A Rev B,Valve foot, 2.875 Outlet, Gallon cone nozzle, reduced 1/2 diameter,V”lvula de pie, 2,875 Outlet, boquilla de cono galones, redujo 1/2 di”metro

5967K81,UCLF202-10,Cast Iron Flange-Mounted Steel Ball Bearing 4 Bolt Square Flange for 5/8” Shaft Dia, 3” Base L, for starwheel

129315C,F1AU-10A1W-AU00,Air motor for 5 gallon pump, A Series, Front Flange Mount, 6 diameter x 10 inch stroke, Std rod 1.275 Rod Dia, Style 1 (1-14 Male Thds) 1/2 NPTF Port, no cushions, 1A-Rod Ext 4.0, BC Bumper Cap with SS Tie rods and SS Rod, 1/2-20 thread tie rods

Relay Socket, 4 PDT, General Purpose, use with Relay 700-HC24Z24-4

Mounting Strap for Pneumatic Position Transmitter, P/N 33.21.326 8 - 100mm

 Top Fill Gravimetric Electronic Semi-Automatic Liquid Filling Machines

The ABA-FILL-TFGES is an electronically controlled, net weight, semi-automatic filling machine which is designed to top fill half pint through 5 gallon containers.

Bottom Fill Gravimetric Electronic Semi-Automatic Liquid Filling Machines

The ABA-FILL-BFGES is an electronically controlled, semi-automatic, net weight filling machine which is designed to bottom-fill containers from half pint to 5 gallon pails.

Top Fill Volumetric Pneumatic Automatic Liquid Filling Machines

The ABA-FILL-TFxPA is a pneumatically controlled, automatic, volumetric machine which is designed to top fill open top containers utilizing one or five gallon double acting pumps.

ABA-SCALE-0082-RevB,Scale Riser Plates

 The ABA-LDHS lid dropper unit is a high speed lid dropper for metal and plastic lids which mounts to all ABA lid press units and can drop lids from 1/2 pint through 1 gallon.

 The ABA-LPHSC-V is a 5 gallon plastic or metal lid placer with a stack, lift, and load assembly and an escapement chute.

 The ABA-RT-60-IN is a 60 inch diameter in feed rotary table.

The ABA-COV-BC-0.75x19 is a diving lance style fill head which is designed to bottom fill containers. 

The ABA-2000-GCV is a 5 gallon double acting piston pump assembly with gravity check valves.

The ABA-80-GCV is a double acting piston pump with gravity check valves.

The ABA-PRESS-5GALL-P is a powered lid press unit.

Bottom Fill Gravimetric Electronic Automatic eXplosion-Proof Liquid Filling Machines

The ABA-FILL-BFGEA-X is an electronically controlled, automatic, explosion proof net weight filling machine which is designed to bottom fill containers from half pint to 5 gallon pails.

Bottom Fill Volumetric Electronic Automatic eXplosion Proof Liquid Filling Machine

 

The ABA-FILL-BFxEA-X machine is an electronically controlled, fully automatic, explosion proof, volumetric machine which is designed to bottom fill half pint cans through 5 gallon pails. 

ABA-COV-85QTS-2STAGE is a two stage, cone style fill head with a 2 inch S-Line inlet and a 1.85 inch diameter outlet for filling quart and gallon cans.

ABA-5GALL-01

ABA-COV-87A

5967K51

ABA-PMTR-06X08R1

700-HN128

33.006

FILL-TFGES

FILL-BFGES

FILL-TFxPA

ABA-SCALE-0082

LDHS

LPHSC-V

RT-60-IN

COV-BC-0.75x19

2000-GCV

80-GCV

PRESS-5GALL-P

FILL-BFGEA-X

FILL-BFxEA-X

COV-85QTS-2STAGE

N/A

N/A

N/A

N/A

N/A

N/A

No

No

No

N/A

No

No

No

No

No

No

No

No

No

No

DateUpdated:11/9/2009 15:36:20,ManufacturerNumber:0, PartPurchaseInstructions:Kaman Quote N408827 9.9.09 $637.09, AltSupplier:Norgren wasTJ10A-X04-AAA98 New A0333C1-RX(4)-UC-LF-CT 6X10 $585.94, LeadTime:Ref serial # 2662591-1 P/N S-A01717C Norgren quote #158767Q 4.7.08, ThieleSalesPrice:Fabco part # 60F1-10A1WA-BRN-CD04K cost ea 434.48
MILLER A4-50B2N-06.00-5.000-0138-N11N-9 $474, OemMargin:0.00,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, OrderDate:4/10/2008, #ABA-00001621P, Qty=1, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:43.00, PartRegularOrder:0, PartRequiresSerialNumber:0,

DateUpdated:8/14/2015 9:34:16, PartUpdatedBy:JacquelineTwigg,ManufacturerNumber:377, AltSupplier:Griffin $59.25/24 9.06 plus $1 for part number, LeadTime:McMaster 92196A246 $9.65/100 10-24 X 7/8 Socket cap screw, ThieleSalesPrice:Stock Check 7/3/12, OemMargin:0.00, Location:02-02-01 & 01A Overflow 02-06, Notes:24 OO Cheetah 7.12.05 ABA-2886 rcd 8.17.05, $58.90/20 $62.50/30 2/08,StockUsedSince:12.29.00, UnUsedItem:0, MinimumStockLevel:20, OnOrder:0, OrderDate:3/11/2015, #ABA-00010231P, Qty=25, PartReOrderQty:24, PartLength:0.00, PartPackQty:0, PartWeight:1.00, PartRegularOrder:1, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/14/2015 9:34:16, PartStockCheckedBy:KirstyGaus,

DateUpdated:9/3/2014 15:29:00, PartUpdatedBy:SimonWalker,ManufacturerNumber:1683, AltSupplier:5967K81 Mc Master $31.63 Weimer 7/11 alternative is $19.87, OemMargin:0.00, Location:17-01-00, Notes:Kaman Quote M276850 25.29 each,UnUsedItem:0, MinimumStockLevel:2, OnOrder:0, OrderDate:7/31/2013, #ABA-00007751P, Qty=2, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:0.93, PartRegularOrder:1, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:9/3/2014 15:29:00, PartStockCheckedBy:KirstyGaus,

DateAdded:6/13/2008 13:03:50, DateUpdated:5/28/2015 10:49:00, PartUpdatedBy:KirstyGaus,ManufacturerNumber:1798, AltSupplier:see B08-U05-10A for SS tie rods only, LeadTime:F1AU-10A1W-AU00 SS tie rods and flange $488.59 ABA-2000-MF1-FLANGE, ThieleSalesPrice:Seal kit P/N ABA-PMTR-06X08R1-SKT, OemMargin:2.00, Location:Overflow Rack 2-1, Notes:Numatics F1AU-10A1W-A1C0 $395.62 11/09 c-Steel tie rods and flange,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, OrderDate:5/19/2015, #ABA-00010446P, Qty=1, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:41.00, PartRegularOrder:1, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:7/23/2013 15:49:52, PartStockCheckedBy:ChristopherBarber,

DateAdded:1/23/2012 8:28:46, DateUpdated:8/21/2015 14:15:48, PartUpdatedBy:KirstyGaus,ManufacturerNumber:5, OemMargin:0.00, Location:21-03-05, Notes:McMc Quote 11842767-00 01/12 $9.22,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, OrderDate:9/17/2014, #ABA-00009656P, Qty=5, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:0.09, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/21/2015 14:15:48, PartStockCheckedBy:ChristopherBarber,

DateAdded:5/18/2012 10:28:37, DateUpdated:8/19/2015 10:38:33,ManufacturerNumber:1969, OemMargin:0.00, Location:08-06-16,UnUsedItem:0, MinimumStockLevel:5, OnOrder:0, OrderDate:4/8/2013, #ABA-00007318P, Qty=4, PartReOrderQty:4, PartLength:0.00, PartPackQty:0, PartWeight:0.05, PartRegularOrder:1, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/19/2015 10:38:33, PartStockCheckedBy:ChristopherBarber,

No

No

No

DateAdded:3/20/2014 14:40:44, DateUpdated:8/19/2015 14:27:21, PartUpdatedBy:KirstyGaus,ManufacturerNumber:2018, PartPurchaseInstructions:6=47 12=43 18=42, OemMargin:0.00, Location:10-01-06, Notes:quote #13663,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, OrderDate:8/8/2014, #ABA-00009442P, Qty=6, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:5.80, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/19/2015 14:27:21, PartStockCheckedBy:ChristopherBarber,

No

No

N/A

N/A

No

No

No

No

No

No