Compare Products

5967K81,UCLF202-10,Cast Iron Flange-Mounted Steel Ball Bearing 4 Bolt Square Flange for 5/8” Shaft Dia, 3” Base L, for starwheel

Metric Phenolic Six-Lobe Knob, M6 X 1.0 Threaded Thru Hole, 40MM Dia

129315C,F1AU-10A1W-AU00,Air motor for 5 gallon pump, A Series, Front Flange Mount, 6 diameter x 10 inch stroke, Std rod 1.275 Rod Dia, Style 1 (1-14 Male Thds) 1/2 NPTF Port, no cushions, 1A-Rod Ext 4.0, BC Bumper Cap with SS Tie rods and SS Rod, 1/2-20 thread tie rods

18-8 SS Flat Point Socket Set Screw 1/4-28 Thread, 1/4 Length

Standard Crimp-on Ring Terminal Nylon Insulated, 16-14 Wire Gauge, #8 Stud, 600V

The ABA-PRESS-5NAR is a standard 5 gallon Non-powered Automatic Roller lid press unit.

Features:

• Hand crank with chain and sprockets allows for full height adjustment from pint through 6 gallon pails.
• 32 x 1 inch diameter steel rollers gradually declining steel rollers to firmly press on lids
• Rollers have 1/4 inch thick stainless steel walls and are mounted on 1/4 inch stainless steel shafts using 2 x 1/4 inch double shielded bearings.
• Stainless steel sheet metal guard covers chain and sprockets.
• Press available as washdown capable - fully stainless steel with stainless steel washdown motor. See photo number 2 above (M399)

Our LDHS lid dropper unit is a high speed lid dropper for metal and plastic lids which mounts to all ABA lid press units (i.e. not a stand-alone unit; must be mounted to press). The star-wheel sets are designed to center the lids before the containers pass underneath the press.

Features:

• Adjustable from ½ pint through gallon containers (maximum diameter 7 inches)
• Simple size changeover using ratchet handles, no tools required
• Simple height adjustment via lid press crank handle
• Interchangeable star-wheel sets for lid alignment
• Speeds of 60+ lids per minute
• Standard vertical lid hopper of 24 inch capacity
• Optional 72 inch down-stacker for extra capacity (shown above in far right photo)
• Pneumatic or electronic controls. 

The ABA-80-GCV is a one gallon double acting piston pump with gravity check valves.

Product Features:

• Stainless steel and Teflon wetted parts
• Cast end caps, tees, and elbows
• Quick release clamps for ease of maintenance
• Fills from half pint to five quarts in a single cycle

The ABA-PRESS-5GALL-P is a powered lid press primarily designed for closing 5 gallon pails, but will also close 1 gallon pails.

Features:

• Hand crank with chain and sprockets allows for height adjustment
• Stainless steel sheet metal guard covers chain and sprockets
• 5 lead in rollers and 6 powered rollers firmly press lids on

5967K81,UCLF202-10,Cast Iron Flange-Mounted Steel Ball Bearing 4 Bolt Square Flange for 5/8” Shaft Dia, 3” Base L, for starwheel

Metric Phenolic Six-Lobe Knob, M6 X 1.0 Threaded Thru Hole, 40MM Dia

129315C,F1AU-10A1W-AU00,Air motor for 5 gallon pump, A Series, Front Flange Mount, 6 diameter x 10 inch stroke, Std rod 1.275 Rod Dia, Style 1 (1-14 Male Thds) 1/2 NPTF Port, no cushions, 1A-Rod Ext 4.0, BC Bumper Cap with SS Tie rods and SS Rod, 1/2-20 thread tie rods

18-8 SS Flat Point Socket Set Screw 1/4-28 Thread, 1/4 Length

Standard Crimp-on Ring Terminal Nylon Insulated, 16-14 Wire Gauge, #8 Stud, 600V

 The ABA-PRESS-5NAR is a standard 5 gallon Non-powered Automatic Roller lid press unit for pressing lids on pint through 6 gallon pails.

 The ABA-LDHS lid dropper unit is a high speed lid dropper for metal and plastic lids which mounts to all ABA lid press units and can drop lids from 1/2 pint through 1 gallon.

The ABA-80-GCV is a double acting piston pump with gravity check valves.

The ABA-PRESS-5GALL-P is a powered lid press unit.

5967K51

4273T81

ABA-PMTR-06X08R1

94355A602

7113K454

PRESS-5NAR

LDHS

80-GCV

PRESS-5GALL-P

N/A

N/A

N/A

N/A

N/A

No

No

No

No

DateUpdated:9/3/2014 15:29:00, PartUpdatedBy:SimonWalker,ManufacturerNumber:1683, AltSupplier:5967K81 Mc Master $31.63 Weimer 7/11 alternative is $19.87, OemMargin:0.00, Location:17-01-00, Notes:Kaman Quote M276850 25.29 each,UnUsedItem:0, MinimumStockLevel:2, OnOrder:0, OrderDate:7/31/2013, #ABA-00007751P, Qty=2, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:0.93, PartRegularOrder:1, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:9/3/2014 15:29:00, PartStockCheckedBy:KirstyGaus,

DateUpdated:8/14/2015 15:19:26,ManufacturerNumber:540, ThieleSalesPrice:Stock Check 7/6/12, OemMargin:0.00, Location:04-05-13, Notes:Mcmasterr Carr used on M170 SAF-1S with container guide,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, OrderDate:9/20/2007, #ABA-00001030P, Qty=2, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:0.06, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/14/2015 15:19:26, PartStockCheckedBy:KirstyGaus,

DateAdded:6/13/2008 13:03:50, DateUpdated:5/28/2015 10:49:00, PartUpdatedBy:KirstyGaus,ManufacturerNumber:1798, AltSupplier:see B08-U05-10A for SS tie rods only, LeadTime:F1AU-10A1W-AU00 SS tie rods and flange $488.59 ABA-2000-MF1-FLANGE, ThieleSalesPrice:Seal kit P/N ABA-PMTR-06X08R1-SKT, OemMargin:2.00, Location:Overflow Rack 2-1, Notes:Numatics F1AU-10A1W-A1C0 $395.62 11/09 c-Steel tie rods and flange,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, OrderDate:5/19/2015, #ABA-00010446P, Qty=1, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:41.00, PartRegularOrder:1, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:7/23/2013 15:49:52, PartStockCheckedBy:ChristopherBarber,

DateAdded:4/21/2009 13:43:09, DateUpdated:7/7/2015 14:52:11, PartUpdatedBy:JacquelineTwigg,ManufacturerNumber:540, ThieleSalesPrice:Stock Check 6/24/13, OemMargin:0.00, Location:Blue-C-660,UnUsedItem:0, MinimumStockLevel:2, OnOrder:0, OrderDate:4/21/2009, #ABA-00002556P, Qty=1, PartReOrderQty:0, PartLength:0.00, PartPackQty:10, PartWeight:0.00, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:7/7/2015 14:52:11, PartStockCheckedBy:ChristineBarber,

DateAdded:7/9/2010 8:49:04, DateUpdated:3/12/2015 13:11:21, PartUpdatedBy:KirstyGaus,ManufacturerNumber:540, OemMargin:0.00, Location:Ferrules overflow 19-06,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, OrderDate:3/9/2015, #ABA-00010200P, Qty=1, PartReOrderQty:0, PartLength:0.00, PartPackQty:50, PartWeight:0.00, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00,

No

No

No

No