Compare Products

128891B,128891,ABA-5GALL-04-RevC,5 Gallon Teflon End Seal,5 galones de tefl”n Seal End

ABA-5GALL-71 Rev F,Check valve cylinder mount, 5 gallon pump, 4 x 10-24 threads.

EX Proof (Motor Starter) Motor Manual Starting Switch, Push Button, 3 Phase, NEMA 0, Type 7 & 9 Bolted Enclosures, for use in Class 1, Groups C & D Divisions 1 & 2

129315C,F1AU-10A1W-AU00,Air motor for 5 gallon pump, A Series, Front Flange Mount, 6 diameter x 10 inch stroke, Std rod 1.275 Rod Dia, Style 1 (1-14 Male Thds) 1/2 NPTF Port, no cushions, 1A-Rod Ext 4.0, BC Bumper Cap with SS Tie rods and SS Rod, 1/2-20 thread tie rods

Standard Crimp-on Ring Terminal Nylon Insulated, 16-14 Wire Gauge, #8 Stud, 600V

Mounting Strap for Pneumatic Position Transmitter, P/N 33.21.326 8 - 100mm

Top Fill Volumetric Electronic Automatic Liquid Filling Machines

The ABA-FILL-TF Top Fill Series are designed to fill open top containers. Our double acting positive displacement piston pumps are faster and have a longer life than single acting pumps as both sides of the piston are flooded with liquid at all times.

Automatic machines require minimal operator intervention and allows for faster CPM (Containers Per Minute) count.

Features:

• Fills open top containers
• One or five gallon double acting pumps
• Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails
• PLC controls
• Fully automatic
• One, two, three or four fill stations
• Available explosion proof rating (Class 1, Division 1 or Class 1, Division 2)

Top Fill Volumetric Pneumatic Semi-Automatic Liquid Filling Machine

The ABA-FILL-TF Top Fill Series are designed to fill open top containers. Our double acting positive displacement piston pumps are faster and have a longer life than single acting pumps as both sides of the piston are flooded with liquid at all times.

Semi-automatic liquid filling machines require the operator to manually position the container under the fill head and require minimal set-up when changing container size.

Features:

• Fills open top containers
• One or five gallon double acting pumps
• Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails
• Pneumatic controls (can be used in both hazardous and non-hazardous areas)
• Semi-automatic
• One or two fill stations

 

Bottom Fill Volumetric Electronic Automatic Liquid Filling Machine

The ABA-FILL-BF Bottom Fill Series are designed to fill below the level of the liquid to minimize foaming. Submerging the fill nozzle beneath the product as it is filling prevents air in the product, and helps to eliminate foaming. This in turn allows the products to be filled more quickly. 

Available with one gallon or five gallon double acting volumetric pumps, each container is filled quickly as the diving lance monitors the product inside the container and submerges the nozzle beneath the liquid surface.

The diving lance is lowered into the bottom of the container and is slowly raised as the container is filled with liquid. We offer two methods of raising the fill lance, either with a Servo motor or an air cylinder.

Features:

• Dual mode top fill / bottom fill filling machine
• Electronic fully adjustable fill head carriage is accurate to within 1/16" inch
• Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails
• PLC controls
• Fully automatic
• One, two, three or four fill stations
• Continuously running conveyor
• Available explosion proof rating (Class 1, Division 1 or Class 1, Division 2)

Top Fill Gravimetric Electronic Semi-Automatic Liquid Filling Machines

The ABA-FILL-TF Top Fill Series are designed to fill open top containers from half pint through 5 gallon. Simple clean-up with only two ball valves and a fill head as wetted parts.

Features:

• Fills open top containers
• High accuracy
• Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails
• Electronic controls
• Semi- automatic
• One or two fill stations
• Available explosion proof rating (Class 1, Division 1 or Class 1, Division 2) 

The ABA-PRESS-1NAR is a standard 1 gallon Non-powered Automatic Roller lid press unit.

Features:

• Hand crank with chain and sprockets allows for full height adjustment from half pint through 1 gallon (5 liter) containers.
• 19 x 1 inch diameter gradually declining steel rollers to firmly press on lids.
• Rollers have 1/4 inch thick steel walls and are mounted on 1/4 inch stainless steel shafts using 2 x 1/4 inch double shielded bearings.
• Stainless steel sheet metal guard covers chain and sprockets.

The ABA-PRESS-5NAR is a standard 5 gallon Non-powered Automatic Roller lid press unit.

Features:

• Hand crank with chain and sprockets allows for full height adjustment from pint through 6 gallon pails.
• 32 x 1 inch diameter steel rollers gradually declining steel rollers to firmly press on lids
• Rollers have 1/4 inch thick stainless steel walls and are mounted on 1/4 inch stainless steel shafts using 2 x 1/4 inch double shielded bearings.
• Stainless steel sheet metal guard covers chain and sprockets.
• Press available as washdown capable - fully stainless steel with stainless steel washdown motor. See photo number 2 above (M399)

The ABA-LPHSC-5 is 5 gallon plastic and metal lid placer with a chute based design. This unit self-centers the lids on the containers as they pass below it.

Features:

• Adjustable release paddles allow for the placement of round, square, and rectangular lids.
• Automatic lid priming keeps the lid chute full and ready for the next container
• In feed line stops automatically space incoming containers
• Low lid stack notifications
• Automatically stops containers when unit is out of lids.

The ABA-RT-60-IN is a 60 inch diameter in feed rotary table. When used as part of an automated line, it allows operators to pre-load large quantities of containers at the start of the line to enhance and speed up the filling process.

Features:

• Container alignment paddles ensure that containers are fed into the conveyor one by one.
• Constructed from stainless steel with a plated circular feed table
• Container contact points are equipped with Teflon runners to prevent marking containers

The ABA-RT-60-OUT is a 60 inch diameter out feed rotary table. When used as part of an automated line, it collates containers as they come off the conveyor and allows for a large quantity of containers to sit until they are ready to be moved forward to the next stage of the process.

Features:

• Constructed from stainless steel with a plated circular feed table
• Container contact points are equipped with Teflon runners to prevent marking containers
• Stainless steel packaging table topped with UHMW plastic allows for easy removal of filled containers 

The ABA-COV-85QTSF is a cone style fill head with a 2 inch S-line inlet for filling quart and gallon cans and an additional flush attachment.

Product Specifications:

• 2 inch S-line inlet
• 1.85 inch diameter outlet
• 2.5 inch diameter flush flange

The ABA-COV-BC-1.25x19 is a diving probe style fill head with a 1.25 inch outer diameter and a 19 inch lance size. This fill head is designed to bottom fill containers.

The ABA-99-PCV is a one gallon double acting piston pump with powered check valves. 

Product Features:

• Cast end caps, tees, and elbows
• Stainless steel and Teflon wetted parts
• Quick release clamps for ease of maintenance
• Power check valves eliminate the need for filter tubs
• Can fill from half pint to 5 quarts in a single cycle

The ABA-TFGES-DRUM is an electronically controlled, top fill, net weight, semi-automatic filling machine designed to fill drums. Simple clean up with only two ball valves and fill head as wetted parts.

Features:

• Fills open top containers
• High accuracy
• Electronic controls
• Semi-automatic

The ABA-PRESS-5GALL-P is a powered lid press primarily designed for closing 5 gallon pails, but will also close 1 gallon pails.

Features:

• Hand crank with chain and sprockets allows for height adjustment
• Stainless steel sheet metal guard covers chain and sprockets
• 5 lead in rollers and 6 powered rollers firmly press lids on

ABA-COV-85BO is a cone fill head with 2 inch S-Line inlet featuring air shear or NO2 blanket technology. The forced air helps to blow off or shear a high viscosity product when the fill is completed.

Top Fill Volumetric Pneumatic Semi-Automatic eXplosion proof Liquid Filling Machine

The ABA-FILL-TF Top Fill Series are designed to fill open top containers. Our double acting positive displacement piston pumps are faster and have a longer life than single acting pumps as both sides of the piston are flooded with liquid at all times. These paint filling machines are highly efficient and fast fillers, increasing productivity and decreasing downtime.

Semi-automatic liquid filling machines require the operator to manually position the container under the fill head and require minimal set-up when changing container size.

Features:

• Fills open top containers
• One or five gallon double acting pumps
• Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails
• Pneumatic controls (can be used in both hazardous and non-hazardous areas)
• Semi-automatic
• One or two fill stations
• Designed for a C1D1 or C1D2 hazardous area

ABA-CRIMP-1EA-1C is a single stage electronic crimper which is mounted on a continuously running conveyor. This lid crimping machine is designed to seal lids onto filled 5 gallon pails.

ABA-COV-85QTS-2STAGE is a two stage, cone style fill head with a 2 inch S-Line inlet and a 1.85 inch diameter outlet for filling quart and gallon cans. A 2 stage fill head eliminates the need for a ball valve because it opens fully at the beginning of a fill and then closes part way in order to dribble for the end of the fill before closing completely when the fill is complete.

128891B,128891,ABA-5GALL-04-RevC,5 Gallon Teflon End Seal,5 galones de tefl”n Seal End

ABA-5GALL-71 Rev F,Check valve cylinder mount, 5 gallon pump, 4 x 10-24 threads.

EX Proof (Motor Starter) Motor Manual Starting Switch, Push Button, 3 Phase, NEMA 0, Type 7 & 9 Bolted Enclosures, for use in Class 1, Groups C & D Divisions 1 & 2

129315C,F1AU-10A1W-AU00,Air motor for 5 gallon pump, A Series, Front Flange Mount, 6 diameter x 10 inch stroke, Std rod 1.275 Rod Dia, Style 1 (1-14 Male Thds) 1/2 NPTF Port, no cushions, 1A-Rod Ext 4.0, BC Bumper Cap with SS Tie rods and SS Rod, 1/2-20 thread tie rods

Standard Crimp-on Ring Terminal Nylon Insulated, 16-14 Wire Gauge, #8 Stud, 600V

Mounting Strap for Pneumatic Position Transmitter, P/N 33.21.326 8 - 100mm

Top Fill Volumetric Electronic Automatic Liquid Filling Machines

The ABA-FILL-TFxEA machine is an electronically controlled, automatic, volumetric machine which is designed to top fill open top containers utilizing one or five gallon double acting pumps.

Top Fill Volumetric Pneumatic Semi-Automatic Liquid Filling Machine

 The ABA-FILL-TFxPS machine is a pneumatically controlled, semi-automatic, volumetric machine which is designed to top fill open top containers utilizing one or five gallon double acting pumps.

Bottom Fill Volumetric Electronic Automatic Liquid Filling Machine

The ABA-FILL-BFxEA machine is an electronically controlled, fully automatic, volumetric machine which is designed to bottom fill half pint cans through 5 gallon pails. 

 

 Top Fill Gravimetric Electronic Semi-Automatic Liquid Filling Machines

The ABA-FILL-TFGES is an electronically controlled, net weight, semi-automatic filling machine which is designed to top fill half pint through 5 gallon containers.

The ABA-PRESS-1NAR is a standard 1 gallon Non-powered Automatic Roller lid press unit for pressing lids on half pint through 1 gallon containers.

 The ABA-PRESS-5NAR is a standard 5 gallon Non-powered Automatic Roller lid press unit for pressing lids on pint through 6 gallon pails.

 The ABA-LPHSC-5 is a 5 gallon plastic and metal lid placer with a chute based design.

 The ABA-RT-60-IN is a 60 inch diameter in feed rotary table.

The ABA-RT-60-OUT is a 60 inch diameter out feed rotary table. 

The ABA-COV-85QTSF is a cone style fill head with a 2 inch S-line inelt for filling quart and gallon cans and an additional flush attachment.

The ABA-COV-BC-1.25x19 is a diving probe style fill head which is designed to bottom fill containers.

The ABA-99-PCV is a one gallon double acting piston pump with powered check valves. 

The ABA-TFGES-DRUM is an electronically controlled, top fill, net weight, semi-automatic filling machine designed to fill drums.

The ABA-PRESS-5GALL-P is a powered lid press unit.

ABA-COV-85BO is a cone fill head with air shear.

Top Fill Volumetric Pneumatic Semi-Automatic eXplosion Proof Liquid Filling Machine

 The ABA-FILL-TFxPS-X machine is a pneumatically controlled, semi-automatic, volumetric machine which is designed to top fill open top containers utilizing one or five gallon double acting pumps and designed for a C1D1 or C1D2 area.

ABA-CRIMP-1EA-1C is a single stage electronic crimper which is mounted on a continuously running conveyor.

ABA-COV-85QTS-2STAGE is a two stage, cone style fill head with a 2 inch S-Line inlet and a 1.85 inch diameter outlet for filling quart and gallon cans.

ABA-5GALL-04

ABA-5GALL-71

609-AEW

ABA-PMTR-06X08R1

7113K454

33.006

FILL-TFxEA

FILL-TFxPS

FILL-BFxEA

FILL-TFGES

PRESS-1NAR

PRESS-5NAR

LPHSC-5

RT-60-IN

RT-60-OUT

COV-85QTSF

COV-BC-1.25x19

99-PCV

TFGES-DRUM

PRESS-5GALL-P

COV-85BO

FILL-TFxPS-X

CRIMP-1EA-1C

COV-85QTS-2STAGE

N/A

N/A

N/A

N/A

N/A

N/A

No

No

No

No

No

No

No

No

No

No

No

No

No

No

No

No

No

No

DateUpdated:9/1/2015 10:34:57, PartUpdatedBy:AnthonyBarber,ManufacturerNumber:2134, PartPurchaseInstructions:Carolina Seal $9/25 $7.90/50 8.11.14, AltSupplier:Seelye Quote SQ01032364 4/9/13 $15.50/25, LeadTime:8.1.14 RFQ Barry Carolina Seal, OemMargin:2.50, Location:09-03-02,StockUsedSince:5/96, UnUsedItem:0, MinimumStockLevel:15, OnOrder:0, OrderDate:8/13/2015, #ABA-00010790P, Qty=25, PartReOrderQty:25, PartLength:0.00, PartPackQty:0, PartWeight:0.03, PartRegularOrder:1, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/19/2015 11:28:28, PartStockCheckedBy:ChristopherBarber,

DateUpdated:8/19/2015 14:14:32,ManufacturerNumber:377, AltSupplier:Qualitek AAAQ7314 $136/10 12/02/2010 Cheetah $86/10 12.13.10, LeadTime:14WMP 29-355 Short welding ferrule, 3 S-line $9.48, ThieleSalesPrice:Stock Check 7/16/12, OemMargin:0.00, Location:10-06-07, Notes:Griffin $129/10,UnUsedItem:0, MinimumStockLevel:4, OnOrder:0, OrderDate:8/22/2011, #ABA-00004976P, Qty=10, PartReOrderQty:10, PartLength:0.00, PartPackQty:0, PartWeight:3.10, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/19/2015 14:14:32, PartStockCheckedBy:ChristopherBarber,

DateUpdated:8/11/2015 12:41:30, PartUpdatedBy:KirstyGaus,ManufacturerNumber:5, PartPurchaseInstructions:McMc Quote 11960006-00 $599.31, OemMargin:0.00, Notes:Revere 9/05 443.623 3/08 $519.00,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, OrderDate:7/30/2015, #ABA-00010736P, Qty=1, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:6.40, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00,

DateAdded:6/13/2008 13:03:50, DateUpdated:5/28/2015 10:49:00, PartUpdatedBy:KirstyGaus,ManufacturerNumber:1798, AltSupplier:see B08-U05-10A for SS tie rods only, LeadTime:F1AU-10A1W-AU00 SS tie rods and flange $488.59 ABA-2000-MF1-FLANGE, ThieleSalesPrice:Seal kit P/N ABA-PMTR-06X08R1-SKT, OemMargin:2.00, Location:Overflow Rack 2-1, Notes:Numatics F1AU-10A1W-A1C0 $395.62 11/09 c-Steel tie rods and flange,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, OrderDate:5/19/2015, #ABA-00010446P, Qty=1, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:41.00, PartRegularOrder:1, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:7/23/2013 15:49:52, PartStockCheckedBy:ChristopherBarber,

DateAdded:7/9/2010 8:49:04, DateUpdated:3/12/2015 13:11:21, PartUpdatedBy:KirstyGaus,ManufacturerNumber:540, OemMargin:0.00, Location:Ferrules overflow 19-06,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, OrderDate:3/9/2015, #ABA-00010200P, Qty=1, PartReOrderQty:0, PartLength:0.00, PartPackQty:50, PartWeight:0.00, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00,

DateAdded:5/18/2012 10:28:37, DateUpdated:8/19/2015 10:38:33,ManufacturerNumber:1969, OemMargin:0.00, Location:08-06-16,UnUsedItem:0, MinimumStockLevel:5, OnOrder:0, OrderDate:4/8/2013, #ABA-00007318P, Qty=4, PartReOrderQty:4, PartLength:0.00, PartPackQty:0, PartWeight:0.05, PartRegularOrder:1, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/19/2015 10:38:33, PartStockCheckedBy:ChristopherBarber,

No

No

No

No

No

No

No

N/A

N/A

No

N/A

No

No

No

No

No

No

No