Compare Products

Print This Page
   
  PRESS-5NAR

PRESS-5NAR

FILL-TFxPA

FILL-TFxPA

LDHS

LDHS

RT-60-IN

RT-60-IN

91352A157

91352A157

COV-85QTS

COV-85QTS

COV-85A

COV-85A

COV-BC-0.75x19

COV-BC-0.75x19

COV-BC-ASSY-SML-11-16

COV-BC-ASSY-SML-11-16

80-GCV

80-GCV

  99-PCV

99-PCV

TFGES-DRUM

TFGES-DRUM

1768-ENBT

1768-ENBT

PRESS-5GALL-P

PRESS-5GALL-P

COV-85BO

COV-85BO

FILL-BFGEA-X

FILL-BFGEA-X

FILL-TFxPS-X

FILL-TFxPS-X

CRIMP-1EA-1C

CRIMP-1EA-1C

COV-85QTS-2STAGE

COV-85QTS-2STAGE

Description

The ABA-PRESS-5NAR is a standard 5 gallon Non-powered Automatic Roller lid press unit.

Features:

  • Hand crank with chain and sprockets allows for full height adjustment from pint through 6 gallon pails.
  • 32 x 1 inch diameter steel rollers gradually declining steel rollers to firmly press on lids
  • Rollers have 1/4 inch thick stainless steel walls and are mounted on 1/4 inch stainless steel shafts using 2 x 1/4 inch double shielded bearings.
  • Stainless steel sheet metal guard covers chain and sprockets.
  • Press available as washdown capable - fully stainless steel with stainless steel washdown motor. See photo number 2 above (M399)

Top Fill Volumetric Pneumatic Automatic Liquid Filling Machines

The ABA-FILL-TFxPA is designed to fill open top containers. Our double acting positive displacement piston pumps are faster and have a longer life than single acting pumps as both sides of the piston are flooded with liquid at all times.

Features:

  • Fills open top containers
  • One or five gallon double acting pumps
  • Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails
  • Pneumatic controls (can be used in both hazardous and non-hazardous areas)
  • Fully automatic
  • One, two, three or four fill stations

Our LDHS lid dropper unit is a high speed lid dropper for metal and plastic lids which mounts to all ABA lid press units (i.e. not a stand-alone unit; must be mounted to press). The star-wheel sets are designed to center the lids before the containers pass underneath the press.

Features:

  • Adjustable from ½ pint through gallon containers (maximum diameter 7 inches)
  • Simple size changeover using ratchet handles, no tools required
  • Simple height adjustment via lid press crank handle
  • Interchangeable star-wheel sets for lid alignment
  • Speeds of 60+ lids per minute
  • Standard vertical lid hopper of 24 inch capacity
  • Optional 72 inch down-stacker for extra capacity (shown above in far right photo)
  • Pneumatic or electronic controls. 

The ABA-RT-60-IN is a 60 inch diameter in feed rotary table. When used as part of an automated line, it allows operators to pre-load large quantities of containers at the start of the line to enhance and speed up the filling process.

Features:

  • Container alignment paddles ensure that containers are fed into the conveyor one by one.
  • Constructed from stainless steel with a plated circular feed table
  • Container contact points are equipped with Teflon runners to prevent marking containers
Button-Head Socket Cap Screw, M8 Size, 35mm Long, Zinc Plated, fully threaded

The ABA-COV-85QTS is a cone style fill head with a 2 inch S-line inlet and a 1.85 inch diameter outlet for filling quart and gallon cans. 

The ABA-COV-85A is a cone style fill head with a 2 inch S-line inlet and a 2.875 inch outlet, which is designed to fill gallon cans.

The ABA-COV-BC-0.75x19 is a diving lance style fill head with a 0.75 inch outer diameter and a 19 inch fill lance which is designed to bottom fill containers. 

The ABA-COV-BC-ASSY-SML-11-16 is a diving probe style fill head which is designed to bottom fill containers. This fill head has an 11/16 inch outer diameter and a 14.5 inch fill lance.

The ABA-80-GCV is a one gallon double acting piston pump with gravity check valves.

Product Features:

  • Stainless steel and Teflon wetted parts
  • Cast end caps, tees, and elbows
  • Quick release clamps for ease of maintenance
  • Fills from half pint to five quarts in a single cycle
Description

The ABA-99-PCV is a one gallon double acting piston pump with powered check valves. 

Product Features:

  • Cast end caps, tees, and elbows
  • Stainless steel and Teflon wetted parts
  • Quick release clamps for ease of maintenance
  • Power check valves eliminate the need for filter tubs
  • Can fill from half pint to 5 quarts in a single cycle

The ABA-TFGES-DRUM is an electronically controlled, top fill, net weight, semi-automatic filling machine designed to fill drums. Simple clean up with only two ball valves and fill head as wetted parts.

Features:

  • Fills open top containers
  • High accuracy
  • Electronic controls
  • Semi-automatic
Modular EtherNet-IP bridge module for CompactLogix L4x series

The ABA-PRESS-5GALL-P is a powered lid press primarily designed for closing 5 gallon pails, but will also close 1 gallon pails.

Features:
  • Hand crank with chain and sprockets allows for height adjustment
  • Stainless steel sheet metal guard covers chain and sprockets
  • 5 lead in rollers and 6 powered rollers firmly press lids on
ABA-COV-85BO is a cone fill head with 2 inch S-Line inlet featuring air shear or NO2 blanket technology. The forced air helps to blow off or shear a high viscosity product when the fill is completed.

Bottom Fill Gravimetric Electronic Automatic eXplosion-Proof Liquid Filling Machines

The ABA-FILL-BF Bottom Fill Series are designed to fill below the level of the liquid to minimize foaming and protect against exposure to static prone products. Submerging the fill nozzle beneath the product as it is filling prevents air in the product, and helps to eliminate foaming and static buildup. This in turn allows the products to be filled more quickly and in a safer manner.

On our bottom fill machines, the diving lance style fill head is lowered into the bottom of the container utilizing either a Servo motor or a pneumatic air cylinder. Both methods offer accurate and easily adjustable filling and tracking. Once the fill cycle starts, the fill carraige slowly rises, drawing the fill head(s) up as it goes. As the container is filled with liquid, the head of the fill lance remains submerged under the level of the liquid. These paint filling machines are highly accurate and will increase the efficiency of any plant.

Features:

  • Fills restricted opening containers (screw caps) as well as open top containers 
  • High accuracy 
  • Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails 
  • Electronic controls 
  • Fully automatic 
  • One to six fill stations
  • Explosion proof for C1D1 or C1D2 area

Top Fill Volumetric Pneumatic Semi-Automatic eXplosion proof Liquid Filling Machine

The ABA-FILL-TF Top Fill Series are designed to fill open top containers. Our double acting positive displacement piston pumps are faster and have a longer life than single acting pumps as both sides of the piston are flooded with liquid at all times. These paint filling machines are highly efficient and fast fillers, increasing productivity and decreasing downtime.

Semi-automatic liquid filling machines require the operator to manually position the container under the fill head and require minimal set-up when changing container size.

Features:

  • Fills open top containers
  • One or five gallon double acting pumps
  • Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails
  • Pneumatic controls (can be used in both hazardous and non-hazardous areas)
  • Semi-automatic
  • One or two fill stations
  • Designed for a C1D1 or C1D2 hazardous area
ABA-CRIMP-1EA-1C is a single stage electronic crimper which is mounted on a continuously running conveyor. This lid crimping machine is designed to seal lids onto filled 5 gallon pails.
ABA-COV-85QTS-2STAGE is a two stage, cone style fill head with a 2 inch S-Line inlet and a 1.85 inch diameter outlet for filling quart and gallon cans. A 2 stage fill head eliminates the need for a ball valve because it opens fully at the beginning of a fill and then closes part way in order to dribble for the end of the fill before closing completely when the fill is complete.
Short Description

 The ABA-PRESS-5NAR is a standard 5 gallon Non-powered Automatic Roller lid press unit for pressing lids on pint through 6 gallon pails.

Top Fill Volumetric Pneumatic Automatic Liquid Filling Machines

The ABA-FILL-TFxPA is a pneumatically controlled, automatic, volumetric machine which is designed to top fill open top containers utilizing one or five gallon double acting pumps.

 The ABA-LDHS lid dropper unit is a high speed lid dropper for metal and plastic lids which mounts to all ABA lid press units and can drop lids from 1/2 pint through 1 gallon.

 The ABA-RT-60-IN is a 60 inch diameter in feed rotary table.

Button-Head Socket Cap Screw, M8 Size, 35mm Long, Zinc Plated, fully threaded

The ABA-COV-85QTS is a cone style fill head with a 2 inch S-line inlet and a 1.85 inch diameter outlet for filling quart and gallon cans. 

The ABA-COV-85A is a cone style fill head with a 2 inch S-line inlet which is designed to fill gallon cans.

The ABA-COV-BC-0.75x19 is a diving lance style fill head which is designed to bottom fill containers. 

The ABA-COV-BC-ASSY-SML-11-16 is a diving probe style fill head which is designed to bottom fill containers.

The ABA-80-GCV is a double acting piston pump with gravity check valves.

Short Description

The ABA-99-PCV is a one gallon double acting piston pump with powered check valves. 

The ABA-TFGES-DRUM is an electronically controlled, top fill, net weight, semi-automatic filling machine designed to fill drums.

Modular EtherNet-IP bridge module for CompactLogix L4x series
The ABA-PRESS-5GALL-P is a powered lid press unit.
ABA-COV-85BO is a cone fill head with air shear.

Bottom Fill Gravimetric Electronic Automatic eXplosion-Proof Liquid Filling Machines

The ABA-FILL-BFGEA-X is an electronically controlled, automatic, explosion proof net weight filling machine which is designed to bottom fill containers from half pint to 5 gallon pails.

Top Fill Volumetric Pneumatic Semi-Automatic eXplosion Proof Liquid Filling Machine

 The ABA-FILL-TFxPS-X machine is a pneumatically controlled, semi-automatic, volumetric machine which is designed to top fill open top containers utilizing one or five gallon double acting pumps and designed for a C1D1 or C1D2 area.

ABA-CRIMP-1EA-1C is a single stage electronic crimper which is mounted on a continuously running conveyor.
ABA-COV-85QTS-2STAGE is a two stage, cone style fill head with a 2 inch S-Line inlet and a 1.85 inch diameter outlet for filling quart and gallon cans.
SKU
PRESS-5NAR
FILL-TFxPA
LDHS
RT-60-IN
91352A157
COV-85QTS
COV-85A
COV-BC-0.75x19
COV-BC-ASSY-SML-11-16
80-GCV
SKU
99-PCV
TFGES-DRUM
1768-ENBT
PRESS-5GALL-P
COV-85BO
FILL-BFGEA-X
FILL-TFxPS-X
CRIMP-1EA-1C
COV-85QTS-2STAGE
Manufacturer
No
No
No
No
N/A
No
No
No
No
No
Manufacturer
No
No
N/A
No
No
No
No
No
No
Notes
No
No
No
N/A
DateAdded:2/5/2014 11:36:56, DateUpdated:8/7/2015 14:15:37, PartUpdatedBy:RussellGentry,ManufacturerNumber:540, OemMargin:0.00, Location:Red-A-1192,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, PartReOrderQty:0, PartLength:0.00, PartPackQty:10, PartWeight:0.06, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:7/14/2015 15:00:51, PartStockCheckedBy:ChristineBarber,
N/A
N/A
N/A
N/A
No
Notes
No
No
DateAdded:4/23/2015 13:15:13, DateUpdated:4/23/2015 13:21:19, PartUpdatedBy:AnthonyBarber,ManufacturerNumber:5, OemMargin:0.00, Location:N/A,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:0.00, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00,
No
No
No
No
No
No