Compare Products

Print This Page
 
  FILL-BFxEA

FILL-BFxEA

FILL-BFGEA

FILL-BFGEA

FILL-BFGES

FILL-BFGES

PRESS-5NAR

PRESS-5NAR

LDHS

LDHS

COV-85QTS

COV-85QTS

COV-85QTSF

COV-85QTSF

80-GCV

80-GCV

99-PCV

99-PCV

COV-85QTS-2STAGE

COV-85QTS-2STAGE

Description

 

Bottom Fill Volumetric Electronic Automatic Liquid Filling Machine

The ABA-FILL-BF Bottom Fill Series are designed to fill below the level of the liquid to minimize foaming. Submerging the fill nozzle beneath the product as it is filling prevents air in the product, and helps to eliminate foaming. This in turn allows the products to be filled more quickly. 

Available with one gallon or five gallon double acting volumetric pumps, each container is filled quickly as the diving lance monitors the product inside the container and submerges the nozzle beneath the liquid surface.

The diving lance is lowered into the bottom of the container and is slowly raised as the container is filled with liquid. We offer two methods of raising the fill lance, either with a Servo motor or an air cylinder.

Features:

  • Dual mode top fill / bottom fill filling machine
  • Electronic fully adjustable fill head carriage is accurate to within 1/16" inch
  • Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails
  • PLC controls
  • Fully automatic
  • One, two, three or four fill stations
  • Continuously running conveyor
  • Available explosion proof rating (Class 1, Division 1 or Class 1, Division 2)

Bottom Fill Gravimetric Electronic Automatic Liquid Filling Machines

The ABA-FILL-BF Bottom Fill Series are designed to fill below the level of the liquid to minimize foaming. Submerging the fill nozzle beneath the product as it is filling prevents air in the product, and helps to eliminate foaming. This in turn allows the products to be filled more quickly.

The diving lance is lowered into the bottom of the container and is slowly raised as the container is filled with liquid, continually keeping the fill lance submerged. We offer two methods of raising the fill lance, either with a servo motor or an air cylinder.

Features:

  • Fills restricted opening containers (screw caps) as well as open top containers
  • High accuracy
  • Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails
  • Electronic controls
  • Fully automatic
  • One, two. three or four fill stations
  • Available explosion proof rating (Class 1, Division 1 or Class 1, Division 2)

Bottom Fill Gravimetric Electronic Semi-Automatic Liquid Filling Machines

The ABA-FILL-BF Bottom Fill Series are designed to fill below the level of the liquid to minimize foaming. Submerging the fill nozzle beneath the product as it is filling prevents air in the product, and helps to eliminate foaming. This in turn allows the products to be filled more quickly.

The diving lance is lowered into the bottom of the container and is slowly raised as the container is filled with liquid, continually keeping the fill lance submerged. We offer two methods of raising the fill lance, either with a servo motor or an air cylinder.

Features:

  • Fills restricted opening containers (screw caps) as well as open top containers
  • High accuracy
  • Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails
  • Electronic controls
  • Semi-automatic
  • One or two fill stations
  • Available explosion proof rating (Class 1, Division 1 or Class 1, Division 2)

The ABA-PRESS-5NAR is a standard 5 gallon Non-powered Automatic Roller lid press unit.

Features:

  • Hand crank with chain and sprockets allows for full height adjustment from pint through 6 gallon pails.
  • 32 x 1 inch diameter steel rollers gradually declining steel rollers to firmly press on lids
  • Rollers have 1/4 inch thick stainless steel walls and are mounted on 1/4 inch stainless steel shafts using 2 x 1/4 inch double shielded bearings.
  • Stainless steel sheet metal guard covers chain and sprockets.
  • Press available as washdown capable - fully stainless steel with stainless steel washdown motor. See photo number 2 above (M399)

Our LDHS lid dropper unit is a high speed lid dropper for metal and plastic lids which mounts to all ABA lid press units (i.e. not a stand-alone unit; must be mounted to press). The star-wheel sets are designed to center the lids before the containers pass underneath the press.

Features:

  • Adjustable from ½ pint through gallon containers (maximum diameter 7 inches)
  • Simple size changeover using ratchet handles, no tools required
  • Simple height adjustment via lid press crank handle
  • Interchangeable star-wheel sets for lid alignment
  • Speeds of 60+ lids per minute
  • Standard vertical lid hopper of 24 inch capacity
  • Optional 72 inch down-stacker for extra capacity (shown above in far right photo)
  • Pneumatic or electronic controls. 

The ABA-COV-85QTS is a cone style fill head with a 2 inch S-line inlet and a 1.85 inch diameter outlet for filling quart and gallon cans. 

The ABA-COV-85QTSF is a cone style fill head with a 2 inch S-line inlet for filling quart and gallon cans and an additional flush attachment.

Product Specifications:

  • 2 inch S-line inlet
  • 1.85 inch diameter outlet
  • 2.5 inch diameter flush flange

The ABA-80-GCV is a one gallon double acting piston pump with gravity check valves.

Product Features:

  • Stainless steel and Teflon wetted parts
  • Cast end caps, tees, and elbows
  • Quick release clamps for ease of maintenance
  • Fills from half pint to five quarts in a single cycle

The ABA-99-PCV is a one gallon double acting piston pump with powered check valves. 

Product Features:

  • Cast end caps, tees, and elbows
  • Stainless steel and Teflon wetted parts
  • Quick release clamps for ease of maintenance
  • Power check valves eliminate the need for filter tubs
  • Can fill from half pint to 5 quarts in a single cycle
ABA-COV-85QTS-2STAGE is a two stage, cone style fill head with a 2 inch S-Line inlet and a 1.85 inch diameter outlet for filling quart and gallon cans. A 2 stage fill head eliminates the need for a ball valve because it opens fully at the beginning of a fill and then closes part way in order to dribble for the end of the fill before closing completely when the fill is complete.
Short Description

Bottom Fill Volumetric Electronic Automatic Liquid Filling Machine

The ABA-FILL-BFxEA machine is an electronically controlled, fully automatic, volumetric machine which is designed to bottom fill half pint cans through 5 gallon pails. 

 

 Bottom Fill Gravimetric Electronic Automatic Liquid Filling Machines

The ABA-FILL-BFGEA is an electronically controlled, automatic, net weight filling machine which is designed to bottom fill containers from half pint to 5 gallon pails.

Bottom Fill Gravimetric Electronic Semi-Automatic Liquid Filling Machines

The ABA-FILL-BFGES is an electronically controlled, semi-automatic, net weight filling machine which is designed to bottom-fill containers from half pint to 5 gallon pails.

 The ABA-PRESS-5NAR is a standard 5 gallon Non-powered Automatic Roller lid press unit for pressing lids on pint through 6 gallon pails.

 The ABA-LDHS lid dropper unit is a high speed lid dropper for metal and plastic lids which mounts to all ABA lid press units and can drop lids from 1/2 pint through 1 gallon.

The ABA-COV-85QTS is a cone style fill head with a 2 inch S-line inlet and a 1.85 inch diameter outlet for filling quart and gallon cans. 

The ABA-COV-85QTSF is a cone style fill head with a 2 inch S-line inelt for filling quart and gallon cans and an additional flush attachment.

The ABA-80-GCV is a double acting piston pump with gravity check valves.

The ABA-99-PCV is a one gallon double acting piston pump with powered check valves. 

ABA-COV-85QTS-2STAGE is a two stage, cone style fill head with a 2 inch S-Line inlet and a 1.85 inch diameter outlet for filling quart and gallon cans.
SKU
FILL-BFxEA
FILL-BFGEA
FILL-BFGES
PRESS-5NAR
LDHS
COV-85QTS
COV-85QTSF
80-GCV
99-PCV
COV-85QTS-2STAGE
Manufacturer
No
No
No
No
No
No
No
No
No
No
Notes
No
No
No
No
No
N/A
No
No
No
No