Compare Products

Print This Page


	ABA-5GALL-03	ABA-5GALL-04	ABA-5GALL-23	ABA-COV-87A	5967K51	FILL-TFxEA	FILL-BFxEA	FILL-TFGEA	FILL-BFGES	PRESS-5NAR		FILL-TFxPA	COV-85QTSF	COV-BC-0.75x19	COV-BC-1.25x19	COV-BC-ASSY-SML-11-16	80-GCV	99-PCV	PLCR-CHUTE	COV-85BO	FILL-BFGEA-X
Description	128890B,128890spb,E1717700,5 Gallon Teflon Wear Ring,5 galones de tefl”n del anillo de desgaste	128891B,128891,ABA-5GALL-04-RevC,5 Gallon Teflon End Seal,5 galones de tefl”n Seal End	128892C,5 Gallon pump cylinder,5 Gallon cilindro de la bomba	ABA-COV-87A Rev B,Valve foot, 2.875 Outlet, Gallon cone nozzle, reduced 1/2 diameter,V”lvula de pie, 2,875 Outlet, boquilla de cono galones, redujo 1/2 di”metro	5967K81,UCLF202-10,Cast Iron Flange-Mounted Steel Ball Bearing 4 Bolt Square Flange for 5/8” Shaft Dia, 3” Base L, for starwheel	Top Fill Volumetric Electronic Automatic Liquid Filling Machines The ABA-FILL-TF Top Fill Series are designed to fill open top containers. Our double acting positive displacement piston pumps are faster and have a longer life than single acting pumps as both sides of the piston are flooded with liquid at all times. Automatic machines require minimal operator intervention and allows for faster CPM (Containers Per Minute) count. Features: Fills open top containers One or five gallon double acting pumps Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails PLC controls Fully automatic One, two, three or four fill stations Available explosion proof rating (Class 1, Division 1 or Class 1, Division 2)	Bottom Fill Volumetric Electronic Automatic Liquid Filling Machine The ABA-FILL-BF Bottom Fill Series are designed to fill below the level of the liquid to minimize foaming. Submerging the fill nozzle beneath the product as it is filling prevents air in the product, and helps to eliminate foaming. This in turn allows the products to be filled more quickly. Available with one gallon or five gallon double acting volumetric pumps, each container is filled quickly as the diving lance monitors the product inside the container and submerges the nozzle beneath the liquid surface. The diving lance is lowered into the bottom of the container and is slowly raised as the container is filled with liquid. We offer two methods of raising the fill lance, either with a Servo motor or an air cylinder. Features: Dual mode top fill / bottom fill filling machine Electronic fully adjustable fill head carriage is accurate to within 1/16" inch Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails PLC controls Fully automatic One, two, three or four fill stations Continuously running conveyor Available explosion proof rating (Class 1, Division 1 or Class 1, Division 2)	Top Fill Gravimetric Electronic Automatic Liquid Filling Machines The ABA-FILL-TF Top Fill Series are designed to fill open top containers from half pint through 5 gallon. Simple clean-up with only two ball valves and a fill head as wetted parts. Features: Fills open top containers High accuracy Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails PLC controls Fully automatic One, two, three or four fill stations Continuously running conveyor Available explosion proof rating (Class 1, Division 1 or Class 1, Division 2)	Bottom Fill Gravimetric Electronic Semi-Automatic Liquid Filling Machines The ABA-FILL-BF Bottom Fill Series are designed to fill below the level of the liquid to minimize foaming. Submerging the fill nozzle beneath the product as it is filling prevents air in the product, and helps to eliminate foaming. This in turn allows the products to be filled more quickly. The diving lance is lowered into the bottom of the container and is slowly raised as the container is filled with liquid, continually keeping the fill lance submerged. We offer two methods of raising the fill lance, either with a servo motor or an air cylinder. Features: Fills restricted opening containers (screw caps) as well as open top containers High accuracy Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails Electronic controls Semi-automatic One or two fill stations Available explosion proof rating (Class 1, Division 1 or Class 1, Division 2)	The ABA-PRESS-5NAR is a standard 5 gallon Non-powered Automatic Roller lid press unit. Features: Hand crank with chain and sprockets allows for full height adjustment from pint through 6 gallon pails. 32 x 1 inch diameter steel rollers gradually declining steel rollers to firmly press on lids Rollers have 1/4 inch thick stainless steel walls and are mounted on 1/4 inch stainless steel shafts using 2 x 1/4 inch double shielded bearings. Stainless steel sheet metal guard covers chain and sprockets. Press available as washdown capable - fully stainless steel with stainless steel washdown motor. See photo number 2 above (M399)	Description	Top Fill Volumetric Pneumatic Automatic Liquid Filling Machines The ABA-FILL-TFxPA is designed to fill open top containers. Our double acting positive displacement piston pumps are faster and have a longer life than single acting pumps as both sides of the piston are flooded with liquid at all times. Features: Fills open top containers One or five gallon double acting pumps Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails Pneumatic controls (can be used in both hazardous and non-hazardous areas) Fully automatic One, two, three or four fill stations	The ABA-COV-85QTSF is a cone style fill head with a 2 inch S-line inlet for filling quart and gallon cans and an additional flush attachment. Product Specifications: 2 inch S-line inlet 1.85 inch diameter outlet 2.5 inch diameter flush flange	The ABA-COV-BC-0.75x19 is a diving lance style fill head with a 0.75 inch outer diameter and a 19 inch fill lance which is designed to bottom fill containers.	The ABA-COV-BC-1.25x19 is a diving probe style fill head with a 1.25 inch outer diameter and a 19 inch lance size. This fill head is designed to bottom fill containers.	The ABA-COV-BC-ASSY-SML-11-16 is a diving probe style fill head which is designed to bottom fill containers. This fill head has an 11/16 inch outer diameter and a 14.5 inch fill lance.	The ABA-80-GCV is a one gallon double acting piston pump with gravity check valves. Product Features: Stainless steel and Teflon wetted parts Cast end caps, tees, and elbows Quick release clamps for ease of maintenance Fills from half pint to five quarts in a single cycle	The ABA-99-PCV is a one gallon double acting piston pump with powered check valves. Product Features: Cast end caps, tees, and elbows Stainless steel and Teflon wetted parts Quick release clamps for ease of maintenance Power check valves eliminate the need for filter tubs Can fill from half pint to 5 quarts in a single cycle	The ABA-PLCR-CHUTE is a semi-automatic lid placer chute for both plastic and metal lids. This design provides a good middle ground between a fully automatic lid placer and having an operator manually place lids one by one. This chute allows the operator to pre-load lids and then step away to work on other machine components before it is necessary to replenish the chute.	ABA-COV-85BO is a cone fill head with 2 inch S-Line inlet featuring air shear or NO2 blanket technology. The forced air helps to blow off or shear a high viscosity product when the fill is completed.	Bottom Fill Gravimetric Electronic Automatic eXplosion-Proof Liquid Filling Machines The ABA-FILL-BF Bottom Fill Series are designed to fill below the level of the liquid to minimize foaming and protect against exposure to static prone products. Submerging the fill nozzle beneath the product as it is filling prevents air in the product, and helps to eliminate foaming and static buildup. This in turn allows the products to be filled more quickly and in a safer manner. On our bottom fill machines, the diving lance style fill head is lowered into the bottom of the container utilizing either a Servo motor or a pneumatic air cylinder. Both methods offer accurate and easily adjustable filling and tracking. Once the fill cycle starts, the fill carraige slowly rises, drawing the fill head(s) up as it goes. As the container is filled with liquid, the head of the fill lance remains submerged under the level of the liquid. These paint filling machines are highly accurate and will increase the efficiency of any plant. Features: Fills restricted opening containers (screw caps) as well as open top containers High accuracy Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails Electronic controls Fully automatic One to six fill stations Explosion proof for C1D1 or C1D2 area
Short Description	128890B,128890spb,E1717700,5 Gallon Teflon Wear Ring,5 galones de tefl”n del anillo de desgaste	128891B,128891,ABA-5GALL-04-RevC,5 Gallon Teflon End Seal,5 galones de tefl”n Seal End	128892C,5 Gallon pump cylinder,5 Gallon cilindro de la bomba	ABA-COV-87A Rev B,Valve foot, 2.875 Outlet, Gallon cone nozzle, reduced 1/2 diameter,V”lvula de pie, 2,875 Outlet, boquilla de cono galones, redujo 1/2 di”metro	5967K81,UCLF202-10,Cast Iron Flange-Mounted Steel Ball Bearing 4 Bolt Square Flange for 5/8” Shaft Dia, 3” Base L, for starwheel	Top Fill Volumetric Electronic Automatic Liquid Filling Machines The ABA-FILL-TFxEA machine is an electronically controlled, automatic, volumetric machine which is designed to top fill open top containers utilizing one or five gallon double acting pumps.	Bottom Fill Volumetric Electronic Automatic Liquid Filling Machine The ABA-FILL-BFxEA machine is an electronically controlled, fully automatic, volumetric machine which is designed to bottom fill half pint cans through 5 gallon pails.	Top Fill Gravimetric Electronic Automatic Liquid Filling Machines The ABA-FILL-TFGEA is an electronically controlled, net weight, automatic filling machine which is designed to top fill half pint to 5 gallon containers.	Bottom Fill Gravimetric Electronic Semi-Automatic Liquid Filling Machines The ABA-FILL-BFGES is an electronically controlled, semi-automatic, net weight filling machine which is designed to bottom-fill containers from half pint to 5 gallon pails.	The ABA-PRESS-5NAR is a standard 5 gallon Non-powered Automatic Roller lid press unit for pressing lids on pint through 6 gallon pails.	Short Description	Top Fill Volumetric Pneumatic Automatic Liquid Filling Machines The ABA-FILL-TFxPA is a pneumatically controlled, automatic, volumetric machine which is designed to top fill open top containers utilizing one or five gallon double acting pumps.	The ABA-COV-85QTSF is a cone style fill head with a 2 inch S-line inelt for filling quart and gallon cans and an additional flush attachment.	The ABA-COV-BC-0.75x19 is a diving lance style fill head which is designed to bottom fill containers.	The ABA-COV-BC-1.25x19 is a diving probe style fill head which is designed to bottom fill containers.	The ABA-COV-BC-ASSY-SML-11-16 is a diving probe style fill head which is designed to bottom fill containers.	The ABA-80-GCV is a double acting piston pump with gravity check valves.	The ABA-99-PCV is a one gallon double acting piston pump with powered check valves.	The ABA-PLCR-CHUTE is a semi-automatic lid placer chute for both plastic and metal lids.	ABA-COV-85BO is a cone fill head with air shear.	Bottom Fill Gravimetric Electronic Automatic eXplosion-Proof Liquid Filling Machines The ABA-FILL-BFGEA-X is an electronically controlled, automatic, explosion proof net weight filling machine which is designed to bottom fill containers from half pint to 5 gallon pails.
SKU	ABA-5GALL-03	ABA-5GALL-04	ABA-5GALL-23	ABA-COV-87A	5967K51	FILL-TFxEA	FILL-BFxEA	FILL-TFGEA	FILL-BFGES	PRESS-5NAR	SKU	FILL-TFxPA	COV-85QTSF	COV-BC-0.75x19	COV-BC-1.25x19	COV-BC-ASSY-SML-11-16	80-GCV	99-PCV	PLCR-CHUTE	COV-85BO	FILL-BFGEA-X
Manufacturer	N/A	N/A	N/A	N/A	N/A	No	No	No	No	No	Manufacturer	No	No	No	No	No	No	No	No	No	No
Notes	DateUpdated:8/19/2015 11:28:07, PartUpdatedBy:RussellGentry,ManufacturerNumber:434, PartPurchaseInstructions:St Gobain $21/50 $18.42/100 7/28/11 Quote 141247, AltSupplier:Quote DPP 63863 7/25/11 $23.95/50, LeadTime:Nippon Quoted $46.917/09, ThieleSalesPrice:Stock Check 7/16/12, OemMargin:2.00, Location:09-03-01, Notes:St Gobain 17 weeks DPP 4 - 5 weeks 1.00 USE FOR D000B-03-124,StockUsedSince:5/96, UnUsedItem:0, MinimumStockLevel:20, OnOrder:0, OrderDate:8/2/2011, #ABA-00004860P, Qty=100, PartReOrderQty:50, PartLength:0.00, PartPackQty:0, PartWeight:0.12, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/19/2015 11:28:07, PartStockCheckedBy:ChristopherBarber,	DateUpdated:9/1/2015 10:34:57, PartUpdatedBy:AnthonyBarber,ManufacturerNumber:2134, PartPurchaseInstructions:Carolina Seal $9/25 $7.90/50 8.11.14, AltSupplier:Seelye Quote SQ01032364 4/9/13 $15.50/25, LeadTime:8.1.14 RFQ Barry Carolina Seal, OemMargin:2.50, Location:09-03-02,StockUsedSince:5/96, UnUsedItem:0, MinimumStockLevel:15, OnOrder:0, OrderDate:8/13/2015, #ABA-00010790P, Qty=25, PartReOrderQty:25, PartLength:0.00, PartPackQty:0, PartWeight:0.03, PartRegularOrder:1, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/19/2015 11:28:28, PartStockCheckedBy:ChristopherBarber,	DateUpdated:5/8/2015 13:07:37, PartUpdatedBy:KirstyGaus,ManufacturerNumber:373, LeadTime:4/14 Mat $267 Mach $368 Freight $60 = $695, OemMargin:2.00, Location:Overflow Rack 2, Notes:Nippon Quoted Standard S. Am price 7/09 $2,321.65,StockUsedSince:4/3/97, UnUsedItem:0, MinimumStockLevel:5, OnOrder:0, OrderDate:9/11/2014, #ABA-00009619P, Qty=8, PartReOrderQty:8, PartLength:0.00, PartPackQty:0, PartWeight:26.00, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:7/23/2013 15:03:14, PartStockCheckedBy:ChristopherBarber,	DateUpdated:8/14/2015 9:34:16, PartUpdatedBy:JacquelineTwigg,ManufacturerNumber:377, AltSupplier:Griffin $59.25/24 9.06 plus $1 for part number, LeadTime:McMaster 92196A246 $9.65/100 10-24 X 7/8 Socket cap screw, ThieleSalesPrice:Stock Check 7/3/12, OemMargin:0.00, Location:02-02-01 & 01A Overflow 02-06, Notes:24 OO Cheetah 7.12.05 ABA-2886 rcd 8.17.05, $58.90/20 $62.50/30 2/08,StockUsedSince:12.29.00, UnUsedItem:0, MinimumStockLevel:20, OnOrder:0, OrderDate:3/11/2015, #ABA-00010231P, Qty=25, PartReOrderQty:24, PartLength:0.00, PartPackQty:0, PartWeight:1.00, PartRegularOrder:1, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/14/2015 9:34:16, PartStockCheckedBy:KirstyGaus,	DateUpdated:9/3/2014 15:29:00, PartUpdatedBy:SimonWalker,ManufacturerNumber:1683, AltSupplier:5967K81 Mc Master $31.63 Weimer 7/11 alternative is $19.87, OemMargin:0.00, Location:17-01-00, Notes:Kaman Quote M276850 25.29 each,UnUsedItem:0, MinimumStockLevel:2, OnOrder:0, OrderDate:7/31/2013, #ABA-00007751P, Qty=2, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:0.93, PartRegularOrder:1, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:9/3/2014 15:29:00, PartStockCheckedBy:KirstyGaus,	No	No	No	No	No	Notes	No	No	N/A	N/A	N/A	No	No	No	No	No