Compare Products

Print This Page


	ABA-5GALL-04	91185A661	FILL-TFxPA	LDHS	RT-60-OUT	PRESS-5GALL-P	FILL-BFGEA-X
Description	128891B,128891,ABA-5GALL-04-RevC,5 Gallon Teflon End Seal,5 galones de tefl”n Seal End	Plastic-Head Thumb Screw Black Knurled Head, 1/4-20 Thread, 1/2 Length	Top Fill Volumetric Pneumatic Automatic Liquid Filling Machines The ABA-FILL-TFxPA is designed to fill open top containers. Our double acting positive displacement piston pumps are faster and have a longer life than single acting pumps as both sides of the piston are flooded with liquid at all times. Features: Fills open top containers One or five gallon double acting pumps Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails Pneumatic controls (can be used in both hazardous and non-hazardous areas) Fully automatic One, two, three or four fill stations	Our LDHS lid dropper unit is a high speed lid dropper for metal and plastic lids which mounts to all ABA lid press units (i.e. not a stand-alone unit; must be mounted to press). The star-wheel sets are designed to center the lids before the containers pass underneath the press. Features: Adjustable from ½ pint through gallon containers (maximum diameter 7 inches) Simple size changeover using ratchet handles, no tools required Simple height adjustment via lid press crank handle Interchangeable star-wheel sets for lid alignment Speeds of 60+ lids per minute Standard vertical lid hopper of 24 inch capacity Optional 72 inch down-stacker for extra capacity (shown above in far right photo) Pneumatic or electronic controls.	The ABA-RT-60-OUT is a 60 inch diameter out feed rotary table. When used as part of an automated line, it collates containers as they come off the conveyor and allows for a large quantity of containers to sit until they are ready to be moved forward to the next stage of the process. Features: Constructed from stainless steel with a plated circular feed table Container contact points are equipped with Teflon runners to prevent marking containers Stainless steel packaging table topped with UHMW plastic allows for easy removal of filled containers	The ABA-PRESS-5GALL-P is a powered lid press primarily designed for closing 5 gallon pails, but will also close 1 gallon pails. Features: Hand crank with chain and sprockets allows for height adjustment Stainless steel sheet metal guard covers chain and sprockets 5 lead in rollers and 6 powered rollers firmly press lids on	Bottom Fill Gravimetric Electronic Automatic eXplosion-Proof Liquid Filling Machines The ABA-FILL-BF Bottom Fill Series are designed to fill below the level of the liquid to minimize foaming and protect against exposure to static prone products. Submerging the fill nozzle beneath the product as it is filling prevents air in the product, and helps to eliminate foaming and static buildup. This in turn allows the products to be filled more quickly and in a safer manner. On our bottom fill machines, the diving lance style fill head is lowered into the bottom of the container utilizing either a Servo motor or a pneumatic air cylinder. Both methods offer accurate and easily adjustable filling and tracking. Once the fill cycle starts, the fill carraige slowly rises, drawing the fill head(s) up as it goes. As the container is filled with liquid, the head of the fill lance remains submerged under the level of the liquid. These paint filling machines are highly accurate and will increase the efficiency of any plant. Features: Fills restricted opening containers (screw caps) as well as open top containers High accuracy Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails Electronic controls Fully automatic One to six fill stations Explosion proof for C1D1 or C1D2 area
Short Description	128891B,128891,ABA-5GALL-04-RevC,5 Gallon Teflon End Seal,5 galones de tefl”n Seal End	Plastic-Head Thumb Screw Black Knurled Head, 1/4-20 Thread, 1/2 Length	Top Fill Volumetric Pneumatic Automatic Liquid Filling Machines The ABA-FILL-TFxPA is a pneumatically controlled, automatic, volumetric machine which is designed to top fill open top containers utilizing one or five gallon double acting pumps.	The ABA-LDHS lid dropper unit is a high speed lid dropper for metal and plastic lids which mounts to all ABA lid press units and can drop lids from 1/2 pint through 1 gallon.	The ABA-RT-60-OUT is a 60 inch diameter out feed rotary table.	The ABA-PRESS-5GALL-P is a powered lid press unit.	Bottom Fill Gravimetric Electronic Automatic eXplosion-Proof Liquid Filling Machines The ABA-FILL-BFGEA-X is an electronically controlled, automatic, explosion proof net weight filling machine which is designed to bottom fill containers from half pint to 5 gallon pails.
SKU	ABA-5GALL-04	91185A661	FILL-TFxPA	LDHS	RT-60-OUT	PRESS-5GALL-P	FILL-BFGEA-X
Manufacturer	N/A	N/A	No	No	No	No	No
Notes	DateUpdated:9/1/2015 10:34:57, PartUpdatedBy:AnthonyBarber,ManufacturerNumber:2134, PartPurchaseInstructions:Carolina Seal $9/25 $7.90/50 8.11.14, AltSupplier:Seelye Quote SQ01032364 4/9/13 $15.50/25, LeadTime:8.1.14 RFQ Barry Carolina Seal, OemMargin:2.50, Location:09-03-02,StockUsedSince:5/96, UnUsedItem:0, MinimumStockLevel:15, OnOrder:0, OrderDate:8/13/2015, #ABA-00010790P, Qty=25, PartReOrderQty:25, PartLength:0.00, PartPackQty:0, PartWeight:0.03, PartRegularOrder:1, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/19/2015 11:28:28, PartStockCheckedBy:ChristopherBarber,	DateAdded:3/13/2013 13:11:35, DateUpdated:8/7/2015 13:56:29, PartUpdatedBy:KirstyGaus,ManufacturerNumber:540, ThieleSalesPrice:Stock Check 6/24/13, OemMargin:0.00, Location:Blue-C-125,UnUsedItem:0, MinimumStockLevel:8, OnOrder:0, OrderDate:7/8/2015, #ABA-00010590P, Qty=2, PartReOrderQty:10, PartLength:0.00, PartPackQty:10, PartWeight:0.01, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:7/7/2015 13:58:32, PartStockCheckedBy:ChristineBarber,	No	No	N/A	No	No