ABA-5GALL-04 |
ABA-COV-87A |
91185A661 |
FILL-TFxPS |
FILL-TFGEA |
PRESS-5NAR |
FILL-TFxPA |
LDHS |
LPHSC-V |
RT-60-IN |
RT-60-OUT |
COV-BC-0.75x19 |
PRESS-5GALL-P |
FILL-BFGEA-X |
FILL-BFxEA-X |
||
Description |
128891B,128891,ABA-5GALL-04-RevC,5 Gallon Teflon End Seal,5 galones de tefl”n Seal End
|
ABA-COV-87A Rev B,Valve foot, 2.875 Outlet, Gallon cone nozzle, reduced 1/2 diameter,V”lvula de pie, 2,875 Outlet, boquilla de cono galones, redujo 1/2 di”metro
|
Plastic-Head Thumb Screw Black Knurled Head, 1/4-20 Thread, 1/2 Length
|
Top Fill Volumetric Pneumatic Semi-Automatic Liquid Filling Machine The ABA-FILL-TF Top Fill Series are designed to fill open top containers. Our double acting positive displacement piston pumps are faster and have a longer life than single acting pumps as both sides of the piston are flooded with liquid at all times. Semi-automatic liquid filling machines require the operator to manually position the container under the fill head and require minimal set-up when changing container size. Features:
|
Top Fill Gravimetric Electronic Automatic Liquid Filling Machines The ABA-FILL-TF Top Fill Series are designed to fill open top containers from half pint through 5 gallon. Simple clean-up with only two ball valves and a fill head as wetted parts. Features:
|
The ABA-PRESS-5NAR is a standard 5 gallon Non-powered Automatic Roller lid press unit. Features:
|
Top Fill Volumetric Pneumatic Automatic Liquid Filling Machines The ABA-FILL-TFxPA is designed to fill open top containers. Our double acting positive displacement piston pumps are faster and have a longer life than single acting pumps as both sides of the piston are flooded with liquid at all times. Features:
|
Our LDHS lid dropper unit is a high speed lid dropper for metal and plastic lids which mounts to all ABA lid press units (i.e. not a stand-alone unit; must be mounted to press). The star-wheel sets are designed to center the lids before the containers pass underneath the press. Features:
|
The ABA-LPHSC-V is a 5 gallon plastic or metal lid placer. This unit has an ergonomically low loading conveyor which is especially beneficial for higher speed applications and loading heavy metal lids. Stacks of lids are conveyed into the lid stacker, raised, and rotated to the escapement chute. This unit self-centers the lids on the containers as they pass below it. Features:
|
The ABA-RT-60-IN is a 60 inch diameter in feed rotary table. When used as part of an automated line, it allows operators to pre-load large quantities of containers at the start of the line to enhance and speed up the filling process. Features:
|
Description |
The ABA-RT-60-OUT is a 60 inch diameter out feed rotary table. When used as part of an automated line, it collates containers as they come off the conveyor and allows for a large quantity of containers to sit until they are ready to be moved forward to the next stage of the process. Features:
|
The ABA-COV-BC-0.75x19 is a diving lance style fill head with a 0.75 inch outer diameter and a 19 inch fill lance which is designed to bottom fill containers. |
The ABA-PRESS-5GALL-P is a powered lid press primarily designed for closing 5 gallon pails, but will also close 1 gallon pails. Features:
|
Bottom Fill Gravimetric Electronic Automatic eXplosion-Proof Liquid Filling Machines The ABA-FILL-BF Bottom Fill Series are designed to fill below the level of the liquid to minimize foaming and protect against exposure to static prone products. Submerging the fill nozzle beneath the product as it is filling prevents air in the product, and helps to eliminate foaming and static buildup. This in turn allows the products to be filled more quickly and in a safer manner. On our bottom fill machines, the diving lance style fill head is lowered into the bottom of the container utilizing either a Servo motor or a pneumatic air cylinder. Both methods offer accurate and easily adjustable filling and tracking. Once the fill cycle starts, the fill carraige slowly rises, drawing the fill head(s) up as it goes. As the container is filled with liquid, the head of the fill lance remains submerged under the level of the liquid. These paint filling machines are highly accurate and will increase the efficiency of any plant. Features:
|
Bottom Fill Volumetric Electronic Automatic eXplosion Proof Liquid Filling Machine The ABA-FILL-BF Bottom Fill Series are designed to fill below the level of the liquid to minimize foaming. Submerging the fill nozzle beneath the product as it is filling prevents air in the product, and helps to eliminate foaming. This in turn allows the products to be filled more quickly. Available with one gallon or five gallon double acting volumetric pumps, each container is filled quickly as the diving lance monitors the product inside the container and submerges the nozzle beneath the liquid surface. The diving lance is lowered into the bottom of the container and is slowly raised as the container is filled with liquid. We offer two methods of raising the fill lance, either with a Servo motor or an air cylinder. Features:
|
Short Description |
128891B,128891,ABA-5GALL-04-RevC,5 Gallon Teflon End Seal,5 galones de tefl”n Seal End
|
ABA-COV-87A Rev B,Valve foot, 2.875 Outlet, Gallon cone nozzle, reduced 1/2 diameter,V”lvula de pie, 2,875 Outlet, boquilla de cono galones, redujo 1/2 di”metro
|
Plastic-Head Thumb Screw Black Knurled Head, 1/4-20 Thread, 1/2 Length
|
Top Fill Volumetric Pneumatic Semi-Automatic Liquid Filling Machine The ABA-FILL-TFxPS machine is a pneumatically controlled, semi-automatic, volumetric machine which is designed to top fill open top containers utilizing one or five gallon double acting pumps. |
Top Fill Gravimetric Electronic Automatic Liquid Filling Machines The ABA-FILL-TFGEA is an electronically controlled, net weight, automatic filling machine which is designed to top fill half pint to 5 gallon containers.
|
The ABA-PRESS-5NAR is a standard 5 gallon Non-powered Automatic Roller lid press unit for pressing lids on pint through 6 gallon pails. |
Top Fill Volumetric Pneumatic Automatic Liquid Filling Machines The ABA-FILL-TFxPA is a pneumatically controlled, automatic, volumetric machine which is designed to top fill open top containers utilizing one or five gallon double acting pumps. |
The ABA-LDHS lid dropper unit is a high speed lid dropper for metal and plastic lids which mounts to all ABA lid press units and can drop lids from 1/2 pint through 1 gallon. |
The ABA-LPHSC-V is a 5 gallon plastic or metal lid placer with a stack, lift, and load assembly and an escapement chute. |
The ABA-RT-60-IN is a 60 inch diameter in feed rotary table. |
Short Description |
The ABA-RT-60-OUT is a 60 inch diameter out feed rotary table. |
The ABA-COV-BC-0.75x19 is a diving lance style fill head which is designed to bottom fill containers. |
The ABA-PRESS-5GALL-P is a powered lid press unit.
|
Bottom Fill Gravimetric Electronic Automatic eXplosion-Proof Liquid Filling Machines The ABA-FILL-BFGEA-X is an electronically controlled, automatic, explosion proof net weight filling machine which is designed to bottom fill containers from half pint to 5 gallon pails. |
Bottom Fill Volumetric Electronic Automatic eXplosion Proof Liquid Filling Machine
The ABA-FILL-BFxEA-X machine is an electronically controlled, fully automatic, explosion proof, volumetric machine which is designed to bottom fill half pint cans through 5 gallon pails. |
SKU |
ABA-5GALL-04
|
ABA-COV-87A
|
91185A661
|
FILL-TFxPS
|
FILL-TFGEA
|
PRESS-5NAR
|
FILL-TFxPA
|
LDHS
|
LPHSC-V
|
RT-60-IN
|
SKU |
RT-60-OUT
|
COV-BC-0.75x19
|
PRESS-5GALL-P
|
FILL-BFGEA-X
|
FILL-BFxEA-X
|
Manufacturer |
N/A
|
N/A
|
N/A
|
No
|
No
|
No
|
No
|
No
|
No
|
No
|
Manufacturer |
No
|
No
|
No
|
No
|
No
|
Notes |
DateUpdated:9/1/2015 10:34:57, PartUpdatedBy:AnthonyBarber,ManufacturerNumber:2134, PartPurchaseInstructions:Carolina Seal $9/25 $7.90/50 8.11.14, AltSupplier:Seelye Quote SQ01032364 4/9/13 $15.50/25, LeadTime:8.1.14 RFQ Barry Carolina Seal, OemMargin:2.50, Location:09-03-02,StockUsedSince:5/96, UnUsedItem:0, MinimumStockLevel:15, OnOrder:0, OrderDate:8/13/2015, #ABA-00010790P, Qty=25, PartReOrderQty:25, PartLength:0.00, PartPackQty:0, PartWeight:0.03, PartRegularOrder:1, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/19/2015 11:28:28, PartStockCheckedBy:ChristopherBarber,
|
DateUpdated:8/14/2015 9:34:16, PartUpdatedBy:JacquelineTwigg,ManufacturerNumber:377, AltSupplier:Griffin $59.25/24 9.06 plus $1 for part number, LeadTime:McMaster 92196A246 $9.65/100 10-24 X 7/8 Socket cap screw, ThieleSalesPrice:Stock Check 7/3/12, OemMargin:0.00, Location:02-02-01 & 01A Overflow 02-06, Notes:24 OO Cheetah 7.12.05 ABA-2886 rcd 8.17.05, $58.90/20 $62.50/30 2/08,StockUsedSince:12.29.00, UnUsedItem:0, MinimumStockLevel:20, OnOrder:0, OrderDate:3/11/2015, #ABA-00010231P, Qty=25, PartReOrderQty:24, PartLength:0.00, PartPackQty:0, PartWeight:1.00, PartRegularOrder:1, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/14/2015 9:34:16, PartStockCheckedBy:KirstyGaus,
|
DateAdded:3/13/2013 13:11:35, DateUpdated:8/7/2015 13:56:29, PartUpdatedBy:KirstyGaus,ManufacturerNumber:540, ThieleSalesPrice:Stock Check 6/24/13, OemMargin:0.00, Location:Blue-C-125,UnUsedItem:0, MinimumStockLevel:8, OnOrder:0, OrderDate:7/8/2015, #ABA-00010590P, Qty=2, PartReOrderQty:10, PartLength:0.00, PartPackQty:10, PartWeight:0.01, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:7/7/2015 13:58:32, PartStockCheckedBy:ChristineBarber,
|
No
|
No
|
No
|
No
|
No
|
No
|
N/A
|
Notes |
N/A
|
N/A
|
No
|
No
|
No
|