Compare Products

91102A031,3/8 LOCKWASHER,92146A031,18-8 Stainless Steel Split Lock Washer 3/8” Screw Size, .68” OD, .09” min Thick

ABA-COV-87A Rev B,Valve foot, 2.875 Outlet, Gallon cone nozzle, reduced 1/2 diameter,V”lvula de pie, 2,875 Outlet, boquilla de cono galones, redujo 1/2 di”metro

EX Proof (Motor Starter) Motor Manual Starting Switch, Push Button, 3 Phase, NEMA 0, Type 7 & 9 Bolted Enclosures, for use in Class 1, Groups C & D Divisions 1 & 2

Metric Phenolic Six-Lobe Knob, M6 X 1.0 Threaded Thru Hole, 40MM Dia

129315C,F1AU-10A1W-AU00,Air motor for 5 gallon pump, A Series, Front Flange Mount, 6 diameter x 10 inch stroke, Std rod 1.275 Rod Dia, Style 1 (1-14 Male Thds) 1/2 NPTF Port, no cushions, 1A-Rod Ext 4.0, BC Bumper Cap with SS Tie rods and SS Rod, 1/2-20 thread tie rods

12 inch 304 SS 1/2 inch Support Rod with End caps

Standard Crimp-on Ring Terminal Nylon Insulated, 16-14 Wire Gauge, #8 Stud, 600V

The ABA-LPHSC-5 is 5 gallon plastic and metal lid placer with a chute based design. This unit self-centers the lids on the containers as they pass below it.

Features:

• Adjustable release paddles allow for the placement of round, square, and rectangular lids.
• Automatic lid priming keeps the lid chute full and ready for the next container
• In feed line stops automatically space incoming containers
• Low lid stack notifications
• Automatically stops containers when unit is out of lids.

ABA-SCALE-0082-RevB,Scale Riser Plates

Our LDHS lid dropper unit is a high speed lid dropper for metal and plastic lids which mounts to all ABA lid press units (i.e. not a stand-alone unit; must be mounted to press). The star-wheel sets are designed to center the lids before the containers pass underneath the press.

Features:

• Adjustable from ½ pint through gallon containers (maximum diameter 7 inches)
• Simple size changeover using ratchet handles, no tools required
• Simple height adjustment via lid press crank handle
• Interchangeable star-wheel sets for lid alignment
• Speeds of 60+ lids per minute
• Standard vertical lid hopper of 24 inch capacity
• Optional 72 inch down-stacker for extra capacity (shown above in far right photo)
• Pneumatic or electronic controls. 

The ABA-RT-60-OUT is a 60 inch diameter out feed rotary table. When used as part of an automated line, it collates containers as they come off the conveyor and allows for a large quantity of containers to sit until they are ready to be moved forward to the next stage of the process.

Features:

• Constructed from stainless steel with a plated circular feed table
• Container contact points are equipped with Teflon runners to prevent marking containers
• Stainless steel packaging table topped with UHMW plastic allows for easy removal of filled containers 

The ABA-COV-BC-0.75x19 is a diving lance style fill head with a 0.75 inch outer diameter and a 19 inch fill lance which is designed to bottom fill containers. 

The ABA-TFGES-DRUM is an electronically controlled, top fill, net weight, semi-automatic filling machine designed to fill drums. Simple clean up with only two ball valves and fill head as wetted parts.

Features:

• Fills open top containers
• High accuracy
• Electronic controls
• Semi-automatic

The ABA-PRESS-5GALL-P is a powered lid press primarily designed for closing 5 gallon pails, but will also close 1 gallon pails.

Features:

• Hand crank with chain and sprockets allows for height adjustment
• Stainless steel sheet metal guard covers chain and sprockets
• 5 lead in rollers and 6 powered rollers firmly press lids on

Bottom Fill Gravimetric Electronic Automatic eXplosion-Proof Liquid Filling Machines

The ABA-FILL-BF Bottom Fill Series are designed to fill below the level of the liquid to minimize foaming and protect against exposure to static prone products. Submerging the fill nozzle beneath the product as it is filling prevents air in the product, and helps to eliminate foaming and static buildup. This in turn allows the products to be filled more quickly and in a safer manner.

On our bottom fill machines, the diving lance style fill head is lowered into the bottom of the container utilizing either a Servo motor or a pneumatic air cylinder. Both methods offer accurate and easily adjustable filling and tracking. Once the fill cycle starts, the fill carraige slowly rises, drawing the fill head(s) up as it goes. As the container is filled with liquid, the head of the fill lance remains submerged under the level of the liquid. These paint filling machines are highly accurate and will increase the efficiency of any plant.

Features:

• Fills restricted opening containers (screw caps) as well as open top containers 
• High accuracy 
• Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails 
• Electronic controls 
• Fully automatic 
• One to six fill stations
• Explosion proof for C1D1 or C1D2 area

Top Fill Volumetric Pneumatic Semi-Automatic eXplosion proof Liquid Filling Machine

The ABA-FILL-TF Top Fill Series are designed to fill open top containers. Our double acting positive displacement piston pumps are faster and have a longer life than single acting pumps as both sides of the piston are flooded with liquid at all times. These paint filling machines are highly efficient and fast fillers, increasing productivity and decreasing downtime.

Semi-automatic liquid filling machines require the operator to manually position the container under the fill head and require minimal set-up when changing container size.

Features:

• Fills open top containers
• One or five gallon double acting pumps
• Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails
• Pneumatic controls (can be used in both hazardous and non-hazardous areas)
• Semi-automatic
• One or two fill stations
• Designed for a C1D1 or C1D2 hazardous area

ABA-CRIMP-1EA-1C is a single stage electronic crimper which is mounted on a continuously running conveyor. This lid crimping machine is designed to seal lids onto filled 5 gallon pails.

ABA-COV-85QTS-2STAGE is a two stage, cone style fill head with a 2 inch S-Line inlet and a 1.85 inch diameter outlet for filling quart and gallon cans. A 2 stage fill head eliminates the need for a ball valve because it opens fully at the beginning of a fill and then closes part way in order to dribble for the end of the fill before closing completely when the fill is complete.

91102A031,3/8 LOCKWASHER,92146A031,18-8 Stainless Steel Split Lock Washer 3/8” Screw Size, .68” OD, .09” min Thick

ABA-COV-87A Rev B,Valve foot, 2.875 Outlet, Gallon cone nozzle, reduced 1/2 diameter,V”lvula de pie, 2,875 Outlet, boquilla de cono galones, redujo 1/2 di”metro

EX Proof (Motor Starter) Motor Manual Starting Switch, Push Button, 3 Phase, NEMA 0, Type 7 & 9 Bolted Enclosures, for use in Class 1, Groups C & D Divisions 1 & 2

Metric Phenolic Six-Lobe Knob, M6 X 1.0 Threaded Thru Hole, 40MM Dia

129315C,F1AU-10A1W-AU00,Air motor for 5 gallon pump, A Series, Front Flange Mount, 6 diameter x 10 inch stroke, Std rod 1.275 Rod Dia, Style 1 (1-14 Male Thds) 1/2 NPTF Port, no cushions, 1A-Rod Ext 4.0, BC Bumper Cap with SS Tie rods and SS Rod, 1/2-20 thread tie rods

12 inch 304 SS 1/2 inch Support Rod with End caps

Standard Crimp-on Ring Terminal Nylon Insulated, 16-14 Wire Gauge, #8 Stud, 600V

 The ABA-LPHSC-5 is a 5 gallon plastic and metal lid placer with a chute based design.

ABA-SCALE-0082-RevB,Scale Riser Plates

 The ABA-LDHS lid dropper unit is a high speed lid dropper for metal and plastic lids which mounts to all ABA lid press units and can drop lids from 1/2 pint through 1 gallon.

The ABA-RT-60-OUT is a 60 inch diameter out feed rotary table. 

The ABA-COV-BC-0.75x19 is a diving lance style fill head which is designed to bottom fill containers. 

The ABA-TFGES-DRUM is an electronically controlled, top fill, net weight, semi-automatic filling machine designed to fill drums.

The ABA-PRESS-5GALL-P is a powered lid press unit.

Bottom Fill Gravimetric Electronic Automatic eXplosion-Proof Liquid Filling Machines

The ABA-FILL-BFGEA-X is an electronically controlled, automatic, explosion proof net weight filling machine which is designed to bottom fill containers from half pint to 5 gallon pails.

Top Fill Volumetric Pneumatic Semi-Automatic eXplosion Proof Liquid Filling Machine

 The ABA-FILL-TFxPS-X machine is a pneumatically controlled, semi-automatic, volumetric machine which is designed to top fill open top containers utilizing one or five gallon double acting pumps and designed for a C1D1 or C1D2 area.

ABA-CRIMP-1EA-1C is a single stage electronic crimper which is mounted on a continuously running conveyor.

ABA-COV-85QTS-2STAGE is a two stage, cone style fill head with a 2 inch S-Line inlet and a 1.85 inch diameter outlet for filling quart and gallon cans.

103237B07

ABA-COV-87A

609-AEW

4273T81

ABA-PMTR-06X08R1

VG-215-12-12T

7113K454

LPHSC-5

ABA-SCALE-0082

LDHS

RT-60-OUT

COV-BC-0.75x19

TFGES-DRUM

PRESS-5GALL-P

FILL-BFGEA-X

FILL-TFxPS-X

CRIMP-1EA-1C

COV-85QTS-2STAGE

N/A

N/A

N/A

N/A

N/A

N/A

N/A

No

N/A

No

No

No

No

No

No

No

No

No

DateUpdated:8/26/2015 17:44:16, PartUpdatedBy:AnthonyBarber,ManufacturerNumber:540, AltSupplier:Universal 50-710-037, OemMargin:0.00, Location:Red-A-10, Notes:McMaster 92146A031 8.01/100pk,UnUsedItem:0, MinimumStockLevel:100, OnOrder:0, OrderDate:8/13/2015, #ABA-00010780P, Qty=2, PartReOrderQty:200, PartLength:0.00, PartPackQty:100, PartWeight:0.01, PartRegularOrder:1, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:7/9/2015 14:18:29, PartStockCheckedBy:ChristineBarber,

DateUpdated:8/14/2015 9:34:16, PartUpdatedBy:JacquelineTwigg,ManufacturerNumber:377, AltSupplier:Griffin $59.25/24 9.06 plus $1 for part number, LeadTime:McMaster 92196A246 $9.65/100 10-24 X 7/8 Socket cap screw, ThieleSalesPrice:Stock Check 7/3/12, OemMargin:0.00, Location:02-02-01 & 01A Overflow 02-06, Notes:24 OO Cheetah 7.12.05 ABA-2886 rcd 8.17.05, $58.90/20 $62.50/30 2/08,StockUsedSince:12.29.00, UnUsedItem:0, MinimumStockLevel:20, OnOrder:0, OrderDate:3/11/2015, #ABA-00010231P, Qty=25, PartReOrderQty:24, PartLength:0.00, PartPackQty:0, PartWeight:1.00, PartRegularOrder:1, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/14/2015 9:34:16, PartStockCheckedBy:KirstyGaus,

DateUpdated:8/11/2015 12:41:30, PartUpdatedBy:KirstyGaus,ManufacturerNumber:5, PartPurchaseInstructions:McMc Quote 11960006-00 $599.31, OemMargin:0.00, Notes:Revere 9/05 443.623 3/08 $519.00,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, OrderDate:7/30/2015, #ABA-00010736P, Qty=1, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:6.40, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00,

DateUpdated:8/14/2015 15:19:26,ManufacturerNumber:540, ThieleSalesPrice:Stock Check 7/6/12, OemMargin:0.00, Location:04-05-13, Notes:Mcmasterr Carr used on M170 SAF-1S with container guide,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, OrderDate:9/20/2007, #ABA-00001030P, Qty=2, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:0.06, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/14/2015 15:19:26, PartStockCheckedBy:KirstyGaus,

DateAdded:6/13/2008 13:03:50, DateUpdated:5/28/2015 10:49:00, PartUpdatedBy:KirstyGaus,ManufacturerNumber:1798, AltSupplier:see B08-U05-10A for SS tie rods only, LeadTime:F1AU-10A1W-AU00 SS tie rods and flange $488.59 ABA-2000-MF1-FLANGE, ThieleSalesPrice:Seal kit P/N ABA-PMTR-06X08R1-SKT, OemMargin:2.00, Location:Overflow Rack 2-1, Notes:Numatics F1AU-10A1W-A1C0 $395.62 11/09 c-Steel tie rods and flange,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, OrderDate:5/19/2015, #ABA-00010446P, Qty=1, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:41.00, PartRegularOrder:1, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:7/23/2013 15:49:52, PartStockCheckedBy:ChristopherBarber,

DateAdded:10/2/2009 9:26:55, DateUpdated:9/21/2012 12:32:36,ManufacturerNumber:595, OemMargin:0.00, Location:N/A,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:0.00, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00,

DateAdded:7/9/2010 8:49:04, DateUpdated:3/12/2015 13:11:21, PartUpdatedBy:KirstyGaus,ManufacturerNumber:540, OemMargin:0.00, Location:Ferrules overflow 19-06,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, OrderDate:3/9/2015, #ABA-00010200P, Qty=1, PartReOrderQty:0, PartLength:0.00, PartPackQty:50, PartWeight:0.00, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00,

No

DateAdded:3/20/2014 14:40:44, DateUpdated:8/19/2015 14:27:21, PartUpdatedBy:KirstyGaus,ManufacturerNumber:2018, PartPurchaseInstructions:6=47 12=43 18=42, OemMargin:0.00, Location:10-01-06, Notes:quote #13663,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, OrderDate:8/8/2014, #ABA-00009442P, Qty=6, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:5.80, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/19/2015 14:27:21, PartStockCheckedBy:ChristopherBarber,

No

N/A

N/A

No

No

No

No

No

No