Compare Products

Print This Page
     
  ABA-5GALL-01

ABA-5GALL-01

ABA-5GALL-03

ABA-5GALL-03

ABA-5GALL-04

ABA-5GALL-04

ABA-5GALL-23

ABA-5GALL-23

ABA-5GALL-68

ABA-5GALL-68

ABA-5GALL-71

ABA-5GALL-71

609-AEW

609-AEW

ABA-PMTR-06X08R1

ABA-PMTR-06X08R1

94355A602

94355A602

33.006

33.006

  91185A661

91185A661

FILL-TFxEA

FILL-TFxEA

FILL-TFxPS

FILL-TFxPS

FILL-TFGEA

FILL-TFGEA

FILL-TFGES

FILL-TFGES

FILL-BFGEA

FILL-BFGEA

FILL-BFGES

FILL-BFGES

LDHS

LDHS

RT-60-OUT

RT-60-OUT

COV-85QTS

COV-85QTS

  COV-BC-0.75x19

COV-BC-0.75x19

COV-BC-1.25x19

COV-BC-1.25x19

80-GCV

80-GCV

99-PCV

99-PCV

PRESS-5GALL-P

PRESS-5GALL-P

FILL-BFGEA-X

FILL-BFGEA-X

FILL-TFxPS-X

FILL-TFxPS-X

Description
A0333C1-RX(4)-UC-LF-CT ,Five Gallon air motor, 6” diameter x 10” stroke, replaced by ABA-PMTR-06X08R1, new part is fully interchangeable.
128890B,128890spb,E1717700,5 Gallon Teflon Wear Ring,5 galones de tefl”n del anillo de desgaste
128891B,128891,ABA-5GALL-04-RevC,5 Gallon Teflon End Seal,5 galones de tefl”n Seal End
128892C,5 Gallon pump cylinder,5 Gallon cilindro de la bomba
ABA-5GALL-64 Rev A and ABA-5GALL-68 Rev E casting drg.,Tee 5 Gallon pump
ABA-5GALL-71 Rev F,Check valve cylinder mount, 5 gallon pump, 4 x 10-24 threads.
EX Proof (Motor Starter) Motor Manual Starting Switch, Push Button, 3 Phase, NEMA 0, Type 7 & 9 Bolted Enclosures, for use in Class 1, Groups C & D Divisions 1 & 2
129315C,F1AU-10A1W-AU00,Air motor for 5 gallon pump, A Series, Front Flange Mount, 6 diameter x 10 inch stroke, Std rod 1.275 Rod Dia, Style 1 (1-14 Male Thds) 1/2 NPTF Port, no cushions, 1A-Rod Ext 4.0, BC Bumper Cap with SS Tie rods and SS Rod, 1/2-20 thread tie rods
18-8 SS Flat Point Socket Set Screw 1/4-28 Thread, 1/4 Length
Mounting Strap for Pneumatic Position Transmitter, P/N 33.21.326 8 - 100mm
Description
Plastic-Head Thumb Screw Black Knurled Head, 1/4-20 Thread, 1/2 Length

Top Fill Volumetric Electronic Automatic Liquid Filling Machines

The ABA-FILL-TF Top Fill Series are designed to fill open top containers. Our double acting positive displacement piston pumps are faster and have a longer life than single acting pumps as both sides of the piston are flooded with liquid at all times.

Automatic machines require minimal operator intervention and allows for faster CPM (Containers Per Minute) count.

Features:

  • Fills open top containers
  • One or five gallon double acting pumps
  • Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails
  • PLC controls
  • Fully automatic
  • One, two, three or four fill stations
  • Available explosion proof rating (Class 1, Division 1 or Class 1, Division 2)

Top Fill Volumetric Pneumatic Semi-Automatic Liquid Filling Machine

The ABA-FILL-TF Top Fill Series are designed to fill open top containers. Our double acting positive displacement piston pumps are faster and have a longer life than single acting pumps as both sides of the piston are flooded with liquid at all times.

Semi-automatic liquid filling machines require the operator to manually position the container under the fill head and require minimal set-up when changing container size.

Features:

  • Fills open top containers
  • One or five gallon double acting pumps
  • Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails
  • Pneumatic controls (can be used in both hazardous and non-hazardous areas)
  • Semi-automatic
  • One or two fill stations

Top Fill Gravimetric Electronic Automatic Liquid Filling Machines

The ABA-FILL-TF Top Fill Series are designed to fill open top containers from half pint through 5 gallon. Simple clean-up with only two ball valves and a fill head as wetted parts.

Features:

  • Fills open top containers
  • High accuracy
  • Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails
  • PLC controls
  • Fully automatic
  • One, two, three or four fill stations
  • Continuously running conveyor
  • Available explosion proof rating (Class 1, Division 1 or Class 1, Division 2)

Top Fill Gravimetric Electronic Semi-Automatic Liquid Filling Machines

The ABA-FILL-TF Top Fill Series are designed to fill open top containers from half pint through 5 gallon. Simple clean-up with only two ball valves and a fill head as wetted parts.

Features:

  • Fills open top containers
  • High accuracy
  • Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails
  • Electronic controls
  • Semi- automatic
  • One or two fill stations
  • Available explosion proof rating (Class 1, Division 1 or Class 1, Division 2) 

Bottom Fill Gravimetric Electronic Automatic Liquid Filling Machines

The ABA-FILL-BF Bottom Fill Series are designed to fill below the level of the liquid to minimize foaming. Submerging the fill nozzle beneath the product as it is filling prevents air in the product, and helps to eliminate foaming. This in turn allows the products to be filled more quickly.

The diving lance is lowered into the bottom of the container and is slowly raised as the container is filled with liquid, continually keeping the fill lance submerged. We offer two methods of raising the fill lance, either with a servo motor or an air cylinder.

Features:

  • Fills restricted opening containers (screw caps) as well as open top containers
  • High accuracy
  • Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails
  • Electronic controls
  • Fully automatic
  • One, two. three or four fill stations
  • Available explosion proof rating (Class 1, Division 1 or Class 1, Division 2)

Bottom Fill Gravimetric Electronic Semi-Automatic Liquid Filling Machines

The ABA-FILL-BF Bottom Fill Series are designed to fill below the level of the liquid to minimize foaming. Submerging the fill nozzle beneath the product as it is filling prevents air in the product, and helps to eliminate foaming. This in turn allows the products to be filled more quickly.

The diving lance is lowered into the bottom of the container and is slowly raised as the container is filled with liquid, continually keeping the fill lance submerged. We offer two methods of raising the fill lance, either with a servo motor or an air cylinder.

Features:

  • Fills restricted opening containers (screw caps) as well as open top containers
  • High accuracy
  • Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails
  • Electronic controls
  • Semi-automatic
  • One or two fill stations
  • Available explosion proof rating (Class 1, Division 1 or Class 1, Division 2)

Our LDHS lid dropper unit is a high speed lid dropper for metal and plastic lids which mounts to all ABA lid press units (i.e. not a stand-alone unit; must be mounted to press). The star-wheel sets are designed to center the lids before the containers pass underneath the press.

Features:

  • Adjustable from ½ pint through gallon containers (maximum diameter 7 inches)
  • Simple size changeover using ratchet handles, no tools required
  • Simple height adjustment via lid press crank handle
  • Interchangeable star-wheel sets for lid alignment
  • Speeds of 60+ lids per minute
  • Standard vertical lid hopper of 24 inch capacity
  • Optional 72 inch down-stacker for extra capacity (shown above in far right photo)
  • Pneumatic or electronic controls. 

The ABA-RT-60-OUT is a 60 inch diameter out feed rotary table. When used as part of an automated line, it collates containers as they come off the conveyor and allows for a large quantity of containers to sit until they are ready to be moved forward to the next stage of the process.

Features:

  • Constructed from stainless steel with a plated circular feed table
  • Container contact points are equipped with Teflon runners to prevent marking containers
  • Stainless steel packaging table topped with UHMW plastic allows for easy removal of filled containers 

The ABA-COV-85QTS is a cone style fill head with a 2 inch S-line inlet and a 1.85 inch diameter outlet for filling quart and gallon cans. 

Description

The ABA-COV-BC-0.75x19 is a diving lance style fill head with a 0.75 inch outer diameter and a 19 inch fill lance which is designed to bottom fill containers. 

The ABA-COV-BC-1.25x19 is a diving probe style fill head with a 1.25 inch outer diameter and a 19 inch lance size. This fill head is designed to bottom fill containers.

The ABA-80-GCV is a one gallon double acting piston pump with gravity check valves.

Product Features:

  • Stainless steel and Teflon wetted parts
  • Cast end caps, tees, and elbows
  • Quick release clamps for ease of maintenance
  • Fills from half pint to five quarts in a single cycle

The ABA-99-PCV is a one gallon double acting piston pump with powered check valves. 

Product Features:

  • Cast end caps, tees, and elbows
  • Stainless steel and Teflon wetted parts
  • Quick release clamps for ease of maintenance
  • Power check valves eliminate the need for filter tubs
  • Can fill from half pint to 5 quarts in a single cycle

The ABA-PRESS-5GALL-P is a powered lid press primarily designed for closing 5 gallon pails, but will also close 1 gallon pails.

Features:
  • Hand crank with chain and sprockets allows for height adjustment
  • Stainless steel sheet metal guard covers chain and sprockets
  • 5 lead in rollers and 6 powered rollers firmly press lids on

Bottom Fill Gravimetric Electronic Automatic eXplosion-Proof Liquid Filling Machines

The ABA-FILL-BF Bottom Fill Series are designed to fill below the level of the liquid to minimize foaming and protect against exposure to static prone products. Submerging the fill nozzle beneath the product as it is filling prevents air in the product, and helps to eliminate foaming and static buildup. This in turn allows the products to be filled more quickly and in a safer manner.

On our bottom fill machines, the diving lance style fill head is lowered into the bottom of the container utilizing either a Servo motor or a pneumatic air cylinder. Both methods offer accurate and easily adjustable filling and tracking. Once the fill cycle starts, the fill carraige slowly rises, drawing the fill head(s) up as it goes. As the container is filled with liquid, the head of the fill lance remains submerged under the level of the liquid. These paint filling machines are highly accurate and will increase the efficiency of any plant.

Features:

  • Fills restricted opening containers (screw caps) as well as open top containers 
  • High accuracy 
  • Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails 
  • Electronic controls 
  • Fully automatic 
  • One to six fill stations
  • Explosion proof for C1D1 or C1D2 area

Top Fill Volumetric Pneumatic Semi-Automatic eXplosion proof Liquid Filling Machine

The ABA-FILL-TF Top Fill Series are designed to fill open top containers. Our double acting positive displacement piston pumps are faster and have a longer life than single acting pumps as both sides of the piston are flooded with liquid at all times. These paint filling machines are highly efficient and fast fillers, increasing productivity and decreasing downtime.

Semi-automatic liquid filling machines require the operator to manually position the container under the fill head and require minimal set-up when changing container size.

Features:

  • Fills open top containers
  • One or five gallon double acting pumps
  • Fills half pint, pint, quart, and gallon cans as well as 5 gallon pails
  • Pneumatic controls (can be used in both hazardous and non-hazardous areas)
  • Semi-automatic
  • One or two fill stations
  • Designed for a C1D1 or C1D2 hazardous area
Short Description
A0333C1-RX(4)-UC-LF-CT ,Five Gallon air motor, 6” diameter x 10” stroke, replaced by ABA-PMTR-06X08R1, new part is fully interchangeable.
128890B,128890spb,E1717700,5 Gallon Teflon Wear Ring,5 galones de tefl”n del anillo de desgaste
128891B,128891,ABA-5GALL-04-RevC,5 Gallon Teflon End Seal,5 galones de tefl”n Seal End
128892C,5 Gallon pump cylinder,5 Gallon cilindro de la bomba
ABA-5GALL-64 Rev A and ABA-5GALL-68 Rev E casting drg.,Tee 5 Gallon pump
ABA-5GALL-71 Rev F,Check valve cylinder mount, 5 gallon pump, 4 x 10-24 threads.
EX Proof (Motor Starter) Motor Manual Starting Switch, Push Button, 3 Phase, NEMA 0, Type 7 & 9 Bolted Enclosures, for use in Class 1, Groups C & D Divisions 1 & 2
129315C,F1AU-10A1W-AU00,Air motor for 5 gallon pump, A Series, Front Flange Mount, 6 diameter x 10 inch stroke, Std rod 1.275 Rod Dia, Style 1 (1-14 Male Thds) 1/2 NPTF Port, no cushions, 1A-Rod Ext 4.0, BC Bumper Cap with SS Tie rods and SS Rod, 1/2-20 thread tie rods
18-8 SS Flat Point Socket Set Screw 1/4-28 Thread, 1/4 Length
Mounting Strap for Pneumatic Position Transmitter, P/N 33.21.326 8 - 100mm
Short Description
Plastic-Head Thumb Screw Black Knurled Head, 1/4-20 Thread, 1/2 Length

Top Fill Volumetric Electronic Automatic Liquid Filling Machines

The ABA-FILL-TFxEA machine is an electronically controlled, automatic, volumetric machine which is designed to top fill open top containers utilizing one or five gallon double acting pumps.

Top Fill Volumetric Pneumatic Semi-Automatic Liquid Filling Machine

 The ABA-FILL-TFxPS machine is a pneumatically controlled, semi-automatic, volumetric machine which is designed to top fill open top containers utilizing one or five gallon double acting pumps.

Top Fill Gravimetric Electronic Automatic Liquid Filling Machines

The ABA-FILL-TFGEA is an electronically controlled, net weight, automatic filling machine which is designed to top fill half pint to 5 gallon containers. 

 

 Top Fill Gravimetric Electronic Semi-Automatic Liquid Filling Machines

The ABA-FILL-TFGES is an electronically controlled, net weight, semi-automatic filling machine which is designed to top fill half pint through 5 gallon containers.

 Bottom Fill Gravimetric Electronic Automatic Liquid Filling Machines

The ABA-FILL-BFGEA is an electronically controlled, automatic, net weight filling machine which is designed to bottom fill containers from half pint to 5 gallon pails.

Bottom Fill Gravimetric Electronic Semi-Automatic Liquid Filling Machines

The ABA-FILL-BFGES is an electronically controlled, semi-automatic, net weight filling machine which is designed to bottom-fill containers from half pint to 5 gallon pails.

 The ABA-LDHS lid dropper unit is a high speed lid dropper for metal and plastic lids which mounts to all ABA lid press units and can drop lids from 1/2 pint through 1 gallon.

The ABA-RT-60-OUT is a 60 inch diameter out feed rotary table. 

The ABA-COV-85QTS is a cone style fill head with a 2 inch S-line inlet and a 1.85 inch diameter outlet for filling quart and gallon cans. 

Short Description

The ABA-COV-BC-0.75x19 is a diving lance style fill head which is designed to bottom fill containers. 

The ABA-COV-BC-1.25x19 is a diving probe style fill head which is designed to bottom fill containers.

The ABA-80-GCV is a double acting piston pump with gravity check valves.

The ABA-99-PCV is a one gallon double acting piston pump with powered check valves. 

The ABA-PRESS-5GALL-P is a powered lid press unit.

Bottom Fill Gravimetric Electronic Automatic eXplosion-Proof Liquid Filling Machines

The ABA-FILL-BFGEA-X is an electronically controlled, automatic, explosion proof net weight filling machine which is designed to bottom fill containers from half pint to 5 gallon pails.

Top Fill Volumetric Pneumatic Semi-Automatic eXplosion Proof Liquid Filling Machine

 The ABA-FILL-TFxPS-X machine is a pneumatically controlled, semi-automatic, volumetric machine which is designed to top fill open top containers utilizing one or five gallon double acting pumps and designed for a C1D1 or C1D2 area.

SKU
ABA-5GALL-01
ABA-5GALL-03
ABA-5GALL-04
ABA-5GALL-23
ABA-5GALL-68
ABA-5GALL-71
609-AEW
ABA-PMTR-06X08R1
94355A602
33.006
SKU
91185A661
FILL-TFxEA
FILL-TFxPS
FILL-TFGEA
FILL-TFGES
FILL-BFGEA
FILL-BFGES
LDHS
RT-60-OUT
COV-85QTS
SKU
COV-BC-0.75x19
COV-BC-1.25x19
80-GCV
99-PCV
PRESS-5GALL-P
FILL-BFGEA-X
FILL-TFxPS-X
Manufacturer
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Manufacturer
N/A
No
No
No
No
No
No
No
No
No
Manufacturer
No
No
No
No
No
No
No
Notes
DateUpdated:11/9/2009 15:36:20,ManufacturerNumber:0, PartPurchaseInstructions:Kaman Quote N408827 9.9.09 $637.09, AltSupplier:Norgren wasTJ10A-X04-AAA98 New A0333C1-RX(4)-UC-LF-CT 6X10 $585.94, LeadTime:Ref serial # 2662591-1 P/N S-A01717C Norgren quote #158767Q 4.7.08, ThieleSalesPrice:Fabco part # 60F1-10A1WA-BRN-CD04K cost ea 434.48
MILLER A4-50B2N-06.00-5.000-0138-N11N-9 $474, OemMargin:0.00,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, OrderDate:4/10/2008, #ABA-00001621P, Qty=1, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:43.00, PartRegularOrder:0, PartRequiresSerialNumber:0,
DateUpdated:8/19/2015 11:28:07, PartUpdatedBy:RussellGentry,ManufacturerNumber:434, PartPurchaseInstructions:St Gobain $21/50 $18.42/100 7/28/11 Quote 141247, AltSupplier:Quote DPP 63863 7/25/11 $23.95/50, LeadTime:Nippon Quoted $46.917/09, ThieleSalesPrice:Stock Check 7/16/12, OemMargin:2.00, Location:09-03-01, Notes:St Gobain 17 weeks DPP 4 - 5 weeks 1.00 USE FOR D000B-03-124,StockUsedSince:5/96, UnUsedItem:0, MinimumStockLevel:20, OnOrder:0, OrderDate:8/2/2011, #ABA-00004860P, Qty=100, PartReOrderQty:50, PartLength:0.00, PartPackQty:0, PartWeight:0.12, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/19/2015 11:28:07, PartStockCheckedBy:ChristopherBarber,
DateUpdated:9/1/2015 10:34:57, PartUpdatedBy:AnthonyBarber,ManufacturerNumber:2134, PartPurchaseInstructions:Carolina Seal $9/25 $7.90/50 8.11.14, AltSupplier:Seelye Quote SQ01032364 4/9/13 $15.50/25, LeadTime:8.1.14 RFQ Barry Carolina Seal, OemMargin:2.50, Location:09-03-02,StockUsedSince:5/96, UnUsedItem:0, MinimumStockLevel:15, OnOrder:0, OrderDate:8/13/2015, #ABA-00010790P, Qty=25, PartReOrderQty:25, PartLength:0.00, PartPackQty:0, PartWeight:0.03, PartRegularOrder:1, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/19/2015 11:28:28, PartStockCheckedBy:ChristopherBarber,
DateUpdated:5/8/2015 13:07:37, PartUpdatedBy:KirstyGaus,ManufacturerNumber:373, LeadTime:4/14 Mat $267 Mach $368 Freight $60 = $695, OemMargin:2.00, Location:Overflow Rack 2, Notes:Nippon Quoted Standard S. Am price 7/09 $2,321.65,StockUsedSince:4/3/97, UnUsedItem:0, MinimumStockLevel:5, OnOrder:0, OrderDate:9/11/2014, #ABA-00009619P, Qty=8, PartReOrderQty:8, PartLength:0.00, PartPackQty:0, PartWeight:26.00, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:7/23/2013 15:03:14, PartStockCheckedBy:ChristopherBarber,
DateUpdated:8/5/2015 13:31:19, PartUpdatedBy:KirstyGaus,ManufacturerNumber:393, AltSupplier:wisc. $4,812.50 tool $271.49/25 mach $70.60 tool $2,100, ABA-5GALL-64 Casting, LeadTime:9/14 $459.20 plus surcharge $10.16 total $469.36 7/15 $3.665 surcharge, ThieleSalesPrice:3/06 $396.34 plus surcharges final price in 2006 with freight is $427.79, OemMargin:5.00, Location:Overflow rack 4 shelf 2 right, Notes:1.11.10 $445.83/10 or 12 $414.27/22 Surchage 1.74# = #18.10 $463.93 $432.37,UnUsedItem:0, MinimumStockLevel:2, OnOrder:0, OrderDate:5/28/2015, #ABA-00010473P, Qty=16, PartReOrderQty:6, PartLength:0.00, PartPackQty:0, PartWeight:8.40, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:9/11/2014 15:44:56, PartStockCheckedBy:KirstyGaus,
DateUpdated:8/19/2015 14:14:32,ManufacturerNumber:377, AltSupplier:Qualitek AAAQ7314 $136/10 12/02/2010 Cheetah $86/10 12.13.10, LeadTime:14WMP 29-355 Short welding ferrule, 3 S-line $9.48, ThieleSalesPrice:Stock Check 7/16/12, OemMargin:0.00, Location:10-06-07, Notes:Griffin $129/10,UnUsedItem:0, MinimumStockLevel:4, OnOrder:0, OrderDate:8/22/2011, #ABA-00004976P, Qty=10, PartReOrderQty:10, PartLength:0.00, PartPackQty:0, PartWeight:3.10, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/19/2015 14:14:32, PartStockCheckedBy:ChristopherBarber,
DateUpdated:8/11/2015 12:41:30, PartUpdatedBy:KirstyGaus,ManufacturerNumber:5, PartPurchaseInstructions:McMc Quote 11960006-00 $599.31, OemMargin:0.00, Notes:Revere 9/05 443.623 3/08 $519.00,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, OrderDate:7/30/2015, #ABA-00010736P, Qty=1, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:6.40, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00,
DateAdded:6/13/2008 13:03:50, DateUpdated:5/28/2015 10:49:00, PartUpdatedBy:KirstyGaus,ManufacturerNumber:1798, AltSupplier:see B08-U05-10A for SS tie rods only, LeadTime:F1AU-10A1W-AU00 SS tie rods and flange $488.59 ABA-2000-MF1-FLANGE, ThieleSalesPrice:Seal kit P/N ABA-PMTR-06X08R1-SKT, OemMargin:2.00, Location:Overflow Rack 2-1, Notes:Numatics F1AU-10A1W-A1C0 $395.62 11/09 c-Steel tie rods and flange,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, OrderDate:5/19/2015, #ABA-00010446P, Qty=1, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:41.00, PartRegularOrder:1, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:7/23/2013 15:49:52, PartStockCheckedBy:ChristopherBarber,
DateAdded:4/21/2009 13:43:09, DateUpdated:7/7/2015 14:52:11, PartUpdatedBy:JacquelineTwigg,ManufacturerNumber:540, ThieleSalesPrice:Stock Check 6/24/13, OemMargin:0.00, Location:Blue-C-660,UnUsedItem:0, MinimumStockLevel:2, OnOrder:0, OrderDate:4/21/2009, #ABA-00002556P, Qty=1, PartReOrderQty:0, PartLength:0.00, PartPackQty:10, PartWeight:0.00, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:7/7/2015 14:52:11, PartStockCheckedBy:ChristineBarber,
DateAdded:5/18/2012 10:28:37, DateUpdated:8/19/2015 10:38:33,ManufacturerNumber:1969, OemMargin:0.00, Location:08-06-16,UnUsedItem:0, MinimumStockLevel:5, OnOrder:0, OrderDate:4/8/2013, #ABA-00007318P, Qty=4, PartReOrderQty:4, PartLength:0.00, PartPackQty:0, PartWeight:0.05, PartRegularOrder:1, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/19/2015 10:38:33, PartStockCheckedBy:ChristopherBarber,
Notes
DateAdded:3/13/2013 13:11:35, DateUpdated:8/7/2015 13:56:29, PartUpdatedBy:KirstyGaus,ManufacturerNumber:540, ThieleSalesPrice:Stock Check 6/24/13, OemMargin:0.00, Location:Blue-C-125,UnUsedItem:0, MinimumStockLevel:8, OnOrder:0, OrderDate:7/8/2015, #ABA-00010590P, Qty=2, PartReOrderQty:10, PartLength:0.00, PartPackQty:10, PartWeight:0.01, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:7/7/2015 13:58:32, PartStockCheckedBy:ChristineBarber,
No
No
No
No
No
No
No
N/A
N/A
Notes
N/A
N/A
No
No
No
No
No