Compare Products

A0333C1-RX(4)-UC-LF-CT ,Five Gallon air motor, 6” diameter x 10” stroke, replaced by ABA-PMTR-06X08R1, new part is fully interchangeable.

128890B,128890spb,E1717700,5 Gallon Teflon Wear Ring,5 galones de tefl”n del anillo de desgaste

128891B,128891,ABA-5GALL-04-RevC,5 Gallon Teflon End Seal,5 galones de tefl”n Seal End

EX Proof (Motor Starter) Motor Manual Starting Switch, Push Button, 3 Phase, NEMA 0, Type 7 & 9 Bolted Enclosures, for use in Class 1, Groups C & D Divisions 1 & 2

The ABA-PRESS-5NAR is a standard 5 gallon Non-powered Automatic Roller lid press unit.

Features:

• Hand crank with chain and sprockets allows for full height adjustment from pint through 6 gallon pails.
• 32 x 1 inch diameter steel rollers gradually declining steel rollers to firmly press on lids
• Rollers have 1/4 inch thick stainless steel walls and are mounted on 1/4 inch stainless steel shafts using 2 x 1/4 inch double shielded bearings.
• Stainless steel sheet metal guard covers chain and sprockets.
• Press available as washdown capable - fully stainless steel with stainless steel washdown motor. See photo number 2 above (M399)

Our LDHS lid dropper unit is a high speed lid dropper for metal and plastic lids which mounts to all ABA lid press units (i.e. not a stand-alone unit; must be mounted to press). The star-wheel sets are designed to center the lids before the containers pass underneath the press.

Features:

• Adjustable from ½ pint through gallon containers (maximum diameter 7 inches)
• Simple size changeover using ratchet handles, no tools required
• Simple height adjustment via lid press crank handle
• Interchangeable star-wheel sets for lid alignment
• Speeds of 60+ lids per minute
• Standard vertical lid hopper of 24 inch capacity
• Optional 72 inch down-stacker for extra capacity (shown above in far right photo)
• Pneumatic or electronic controls. 

The ABA-RT-60-IN is a 60 inch diameter in feed rotary table. When used as part of an automated line, it allows operators to pre-load large quantities of containers at the start of the line to enhance and speed up the filling process.

Features:

• Container alignment paddles ensure that containers are fed into the conveyor one by one.
• Constructed from stainless steel with a plated circular feed table
• Container contact points are equipped with Teflon runners to prevent marking containers

The ABA-RT-60-OUT is a 60 inch diameter out feed rotary table. When used as part of an automated line, it collates containers as they come off the conveyor and allows for a large quantity of containers to sit until they are ready to be moved forward to the next stage of the process.

Features:

• Constructed from stainless steel with a plated circular feed table
• Container contact points are equipped with Teflon runners to prevent marking containers
• Stainless steel packaging table topped with UHMW plastic allows for easy removal of filled containers 

The ABA-COV-85QTSF is a cone style fill head with a 2 inch S-line inlet for filling quart and gallon cans and an additional flush attachment.

Product Specifications:

• 2 inch S-line inlet
• 1.85 inch diameter outlet
• 2.5 inch diameter flush flange

The ABA-COV-BC-0.75x19 is a diving lance style fill head with a 0.75 inch outer diameter and a 19 inch fill lance which is designed to bottom fill containers. 

The ABA-COV-BC-1.25x19 is a diving probe style fill head with a 1.25 inch outer diameter and a 19 inch lance size. This fill head is designed to bottom fill containers.

The ABA-COV-BC-ASSY-SML-11-16 is a diving probe style fill head which is designed to bottom fill containers. This fill head has an 11/16 inch outer diameter and a 14.5 inch fill lance.

The ABA-99-PCV is a one gallon double acting piston pump with powered check valves. 

Product Features:

• Cast end caps, tees, and elbows
• Stainless steel and Teflon wetted parts
• Quick release clamps for ease of maintenance
• Power check valves eliminate the need for filter tubs
• Can fill from half pint to 5 quarts in a single cycle

The ABA-TFGES-DRUM is an electronically controlled, top fill, net weight, semi-automatic filling machine designed to fill drums. Simple clean up with only two ball valves and fill head as wetted parts.

Features:

• Fills open top containers
• High accuracy
• Electronic controls
• Semi-automatic

The ABA-PRESS-5GALL-P is a powered lid press primarily designed for closing 5 gallon pails, but will also close 1 gallon pails.

Features:

• Hand crank with chain and sprockets allows for height adjustment
• Stainless steel sheet metal guard covers chain and sprockets
• 5 lead in rollers and 6 powered rollers firmly press lids on

A0333C1-RX(4)-UC-LF-CT ,Five Gallon air motor, 6” diameter x 10” stroke, replaced by ABA-PMTR-06X08R1, new part is fully interchangeable.

128890B,128890spb,E1717700,5 Gallon Teflon Wear Ring,5 galones de tefl”n del anillo de desgaste

128891B,128891,ABA-5GALL-04-RevC,5 Gallon Teflon End Seal,5 galones de tefl”n Seal End

EX Proof (Motor Starter) Motor Manual Starting Switch, Push Button, 3 Phase, NEMA 0, Type 7 & 9 Bolted Enclosures, for use in Class 1, Groups C & D Divisions 1 & 2

 The ABA-PRESS-5NAR is a standard 5 gallon Non-powered Automatic Roller lid press unit for pressing lids on pint through 6 gallon pails.

 The ABA-LDHS lid dropper unit is a high speed lid dropper for metal and plastic lids which mounts to all ABA lid press units and can drop lids from 1/2 pint through 1 gallon.

 The ABA-RT-60-IN is a 60 inch diameter in feed rotary table.

The ABA-RT-60-OUT is a 60 inch diameter out feed rotary table. 

The ABA-COV-85QTSF is a cone style fill head with a 2 inch S-line inelt for filling quart and gallon cans and an additional flush attachment.

The ABA-COV-BC-0.75x19 is a diving lance style fill head which is designed to bottom fill containers. 

The ABA-COV-BC-1.25x19 is a diving probe style fill head which is designed to bottom fill containers.

The ABA-COV-BC-ASSY-SML-11-16 is a diving probe style fill head which is designed to bottom fill containers.

The ABA-99-PCV is a one gallon double acting piston pump with powered check valves. 

The ABA-TFGES-DRUM is an electronically controlled, top fill, net weight, semi-automatic filling machine designed to fill drums.

The ABA-PRESS-5GALL-P is a powered lid press unit.

ABA-5GALL-01

ABA-5GALL-03

ABA-5GALL-04

609-AEW

PRESS-5NAR

LDHS

RT-60-IN

RT-60-OUT

COV-85QTSF

COV-BC-0.75x19

COV-BC-1.25x19

COV-BC-ASSY-SML-11-16

99-PCV

TFGES-DRUM

PRESS-5GALL-P

N/A

N/A

N/A

N/A

No

No

No

No

No

No

No

No

No

No

No

DateUpdated:11/9/2009 15:36:20,ManufacturerNumber:0, PartPurchaseInstructions:Kaman Quote N408827 9.9.09 $637.09, AltSupplier:Norgren wasTJ10A-X04-AAA98 New A0333C1-RX(4)-UC-LF-CT 6X10 $585.94, LeadTime:Ref serial # 2662591-1 P/N S-A01717C Norgren quote #158767Q 4.7.08, ThieleSalesPrice:Fabco part # 60F1-10A1WA-BRN-CD04K cost ea 434.48
MILLER A4-50B2N-06.00-5.000-0138-N11N-9 $474, OemMargin:0.00,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, OrderDate:4/10/2008, #ABA-00001621P, Qty=1, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:43.00, PartRegularOrder:0, PartRequiresSerialNumber:0,

DateUpdated:8/19/2015 11:28:07, PartUpdatedBy:RussellGentry,ManufacturerNumber:434, PartPurchaseInstructions:St Gobain $21/50 $18.42/100 7/28/11 Quote 141247, AltSupplier:Quote DPP 63863 7/25/11 $23.95/50, LeadTime:Nippon Quoted $46.917/09, ThieleSalesPrice:Stock Check 7/16/12, OemMargin:2.00, Location:09-03-01, Notes:St Gobain 17 weeks DPP 4 - 5 weeks 1.00 USE FOR D000B-03-124,StockUsedSince:5/96, UnUsedItem:0, MinimumStockLevel:20, OnOrder:0, OrderDate:8/2/2011, #ABA-00004860P, Qty=100, PartReOrderQty:50, PartLength:0.00, PartPackQty:0, PartWeight:0.12, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/19/2015 11:28:07, PartStockCheckedBy:ChristopherBarber,

DateUpdated:9/1/2015 10:34:57, PartUpdatedBy:AnthonyBarber,ManufacturerNumber:2134, PartPurchaseInstructions:Carolina Seal $9/25 $7.90/50 8.11.14, AltSupplier:Seelye Quote SQ01032364 4/9/13 $15.50/25, LeadTime:8.1.14 RFQ Barry Carolina Seal, OemMargin:2.50, Location:09-03-02,StockUsedSince:5/96, UnUsedItem:0, MinimumStockLevel:15, OnOrder:0, OrderDate:8/13/2015, #ABA-00010790P, Qty=25, PartReOrderQty:25, PartLength:0.00, PartPackQty:0, PartWeight:0.03, PartRegularOrder:1, PartRequiresSerialNumber:0, PartAmps:0.00, PartStockChecked:8/19/2015 11:28:28, PartStockCheckedBy:ChristopherBarber,

DateUpdated:8/11/2015 12:41:30, PartUpdatedBy:KirstyGaus,ManufacturerNumber:5, PartPurchaseInstructions:McMc Quote 11960006-00 $599.31, OemMargin:0.00, Notes:Revere 9/05 443.623 3/08 $519.00,UnUsedItem:0, MinimumStockLevel:0, OnOrder:0, OrderDate:7/30/2015, #ABA-00010736P, Qty=1, PartReOrderQty:0, PartLength:0.00, PartPackQty:0, PartWeight:6.40, PartRegularOrder:0, PartRequiresSerialNumber:0, PartAmps:0.00,

No

No

N/A

N/A

No

N/A

N/A

N/A

No

No

No