Compare Products

Print This Page
 
  LDHS

LDHS

COV-85QTS

COV-85QTS

COV-85QTSF

COV-85QTSF

80-GCV

80-GCV

99-PCV

99-PCV

PRESS-5GALL-P

PRESS-5GALL-P

COV-85QTS-2STAGE

COV-85QTS-2STAGE

Description

Our LDHS lid dropper unit is a high speed lid dropper for metal and plastic lids which mounts to all ABA lid press units (i.e. not a stand-alone unit; must be mounted to press). The star-wheel sets are designed to center the lids before the containers pass underneath the press.

Features:

  • Adjustable from ½ pint through gallon containers (maximum diameter 7 inches)
  • Simple size changeover using ratchet handles, no tools required
  • Simple height adjustment via lid press crank handle
  • Interchangeable star-wheel sets for lid alignment
  • Speeds of 60+ lids per minute
  • Standard vertical lid hopper of 24 inch capacity
  • Optional 72 inch down-stacker for extra capacity (shown above in far right photo)
  • Pneumatic or electronic controls. 

The ABA-COV-85QTS is a cone style fill head with a 2 inch S-line inlet and a 1.85 inch diameter outlet for filling quart and gallon cans. 

The ABA-COV-85QTSF is a cone style fill head with a 2 inch S-line inlet for filling quart and gallon cans and an additional flush attachment.

Product Specifications:

  • 2 inch S-line inlet
  • 1.85 inch diameter outlet
  • 2.5 inch diameter flush flange

The ABA-80-GCV is a one gallon double acting piston pump with gravity check valves.

Product Features:

  • Stainless steel and Teflon wetted parts
  • Cast end caps, tees, and elbows
  • Quick release clamps for ease of maintenance
  • Fills from half pint to five quarts in a single cycle

The ABA-99-PCV is a one gallon double acting piston pump with powered check valves. 

Product Features:

  • Cast end caps, tees, and elbows
  • Stainless steel and Teflon wetted parts
  • Quick release clamps for ease of maintenance
  • Power check valves eliminate the need for filter tubs
  • Can fill from half pint to 5 quarts in a single cycle

The ABA-PRESS-5GALL-P is a powered lid press primarily designed for closing 5 gallon pails, but will also close 1 gallon pails.

Features:
  • Hand crank with chain and sprockets allows for height adjustment
  • Stainless steel sheet metal guard covers chain and sprockets
  • 5 lead in rollers and 6 powered rollers firmly press lids on
ABA-COV-85QTS-2STAGE is a two stage, cone style fill head with a 2 inch S-Line inlet and a 1.85 inch diameter outlet for filling quart and gallon cans. A 2 stage fill head eliminates the need for a ball valve because it opens fully at the beginning of a fill and then closes part way in order to dribble for the end of the fill before closing completely when the fill is complete.
Short Description

 The ABA-LDHS lid dropper unit is a high speed lid dropper for metal and plastic lids which mounts to all ABA lid press units and can drop lids from 1/2 pint through 1 gallon.

The ABA-COV-85QTS is a cone style fill head with a 2 inch S-line inlet and a 1.85 inch diameter outlet for filling quart and gallon cans. 

The ABA-COV-85QTSF is a cone style fill head with a 2 inch S-line inelt for filling quart and gallon cans and an additional flush attachment.

The ABA-80-GCV is a double acting piston pump with gravity check valves.

The ABA-99-PCV is a one gallon double acting piston pump with powered check valves. 

The ABA-PRESS-5GALL-P is a powered lid press unit.
ABA-COV-85QTS-2STAGE is a two stage, cone style fill head with a 2 inch S-Line inlet and a 1.85 inch diameter outlet for filling quart and gallon cans.
SKU
LDHS
COV-85QTS
COV-85QTSF
80-GCV
99-PCV
PRESS-5GALL-P
COV-85QTS-2STAGE
Manufacturer
No
No
No
No
No
No
No
Notes
No
N/A
No
No
No
No
No