All pumps are volumetric, positive displacement, double acting piston units. Manufactured from stainless steel with Teflon seals and gaskets. Pumps are held together with quick release clamps for ease of maintenance. Double acting pumps allow product to both sides of the piston chamber, increasing the life of the product cylinder and seals and allowing for greater fill speeds. A six position volume selector turret with individual threaded stops make volume changeover almost instantaneous.

• Double acting five gallon pump

• Stainless steel and Teflon wetted parts

• Cast end caps, Tees and Elbows

• Quick release clamps for maintenance

• Powered check valves eliminate need for filter tub

• Both sides of the piston flooded with product for increased cylinder and seal life.

• Gravity check valve units also available

ABA-2000PCV
 

As ABA-2000 with powered check valves instead of gravity check valves.

ABA-80. Uses gravity floating or gravity check valves.  This pump is best when gravity fed from a filter tub located close to the filling machine. Can fill from half pint to five quarts in a single cycle (cycling four times for a five gallon fill) Pumps are typically located a few inches above floor level to accommodate a gravity feed from the filter tub.