Welcome to Anthony Barber
Associates, Ltd., USA. Tel: +1 (704) 714-3494
sales [at] abaltd.com
Liquid Filling Machines including Paint Filling Machines and Chemical Filling Machines, Lid Placers and Lid Droppers,
Lid Press and Lid Crimpers for Plastic Containers and Metal Containers. We also stock spare parts for ABA, Thiele, Neumo and Neupak Filling Equipment
ABA-LPHSC-5 shown integrated into 10 foot continuous conveyor with 5 Gallon roller Lid Press.
High Speed Chute based 5 Gallon Lid Placer
Our High Speed Chute based 5 Gallon Plastic Lid Placer is specially designed to self center the lids on the containers as they pass below the unit. This makes this unit more
forgiving for setup and operation and less worrisome for maintenance.
The ABA-LPHCS-5 5 Gallon Plastic Lid Placer can be fully integrated with the ABA-PRESS-5NR-14.5 5 Gallon Roller Lid Press unit and control panel with remote interface.
The remote interface allows fault signaling and remote start/stop to be performed from a centralized control system.
Automatic chute replenishment allows the unit to keep the dropper chute constantly charged ready for the next container.
The lid stacker holds around 80 plastic container lids.
Adjustable release paddles ensures that the unit will work with almost any shaped container
Places 5 gallon plastic lids.
Self centering of lids makes setup easier.
Automatic lid priming keeps the lid chute full and ready for the next container.
In feed line stops automatically space incoming containers.
Low lid stack notifications.
Automatically stops containers when the unit is out of lids.
Hand crank with chain and
sprockets allows for full height adjustment for different height pails.
32 x 1 inch diameter steel rollers mounted
along a 3 foot press zone gradually press the
lids firmly into place by declining each roller along
the press path.
The rollers have 1/4 inch thick steel
walls and are mounted
on 1/4 inch stainless steel shafts using 2 x 1/4 inch double
shielded bearings.
Each press is fitted with a Container Anti-Tip
Mechanism to stop the
containers tipping as they exit the Lid Press. *(see details below)
Stainless steel sheet metal guard covers
chain and sprockets.
To be integrated with 14.4 inch wide straight-running,
table top chain conveyor.
Roller lid press for closing
quart through one Gallon cans
Hand crank with chain and
sprockets allows for full height adjustment from half
pint
through 1 Gallon (5 liter) containers.
19 x 1 inch diameter steel rollers mounted
along a 21 inch press zone gradually press the
lids firmly into place by declining each roller along
the press path.
The rollers have 1/4 inch thick steel
walls and are mounted
on 1/4 inch stainless steel shafts using 2 x 1/4 inch double
shielded bearings.
Stainless steel sheet metal guard covers
chain and sprockets.
To be integrated with straight-running,
table top chain conveyor.
The 5-Gallon Roller Lid Presses have the "Lid Press Anti-Tip
Mechanism" attached to the out feed end of the Lid Press
unit.
Although our Lid Presses have level rollers for the final
area of the Press, some containers can still try and tip as
they exit. The "Lid Press Anti-Tip Mechanism" attached
to the Lid Press helps prevent the containers tipping as
they exit.
