Volumetric Filling Machines
Dual Mode |
Top Fill |
Bottom Fill (Diving Probe)
|
Designed for foaming and
non-foaming liquids, these machines automatically
convey and fill containers from half pint to one
gallon using single or multiple fill stations. A
typical twin head machine, for example, will fill
approximately 25 gallons per minute and 45 quarts
per minute of liquid products.
Optional items include five gallon
pail filling (on or off line), automatic lid placing
and pressing/crimping, pneumatic or PLC controls,
explosion proof construction.
Product contact parts are Teflon,
stainless steel and brass
(see "Pumps"
and "Fill
heads")
Standard adjustable height
carriage machines can
be configured for up to four fill stations.
Swing head machine are available
with up to 2 fill stations.
|
|
| |
|
Dual Mode Top Fill / Bottom Fill
|
|
Model:
ABA-FILL-TB1EAF-M3-EC-5LP-LD |
The newest addition to Anthony Barber Associates, Ltd filling
machine family is the Model: ABA-FILL-TB1EAF-M3-EC-5LP-LD.
With precision placement of the fill head carriage bar, this
filling machine can perform in "top fill" mode with motorized
head positioning and at the flick of a switch,the filling
machine will transform into a fully automatic "bottom fill"
(diving probe) filling machine. The high velocity drive system
places the fill head carriage bar at the heights required for
each stage of the filling process with lightening speed and
accuracy. |
|
-
Dual Mode Top Fill / Bottom Fill Filling
Machine
-
Electronic fully adjustable fill head
carriage is accurate to within 1/16" inch
-
Fills Quart cans through 5 Gallon pails
-
PLC Controls
-
Fully Automatic
-
One, Two or Three Fill Stations.
-
Continuously Running Conveyor.
-
Optional Lid Press or Lid Crimper
Product Videos available in the information center
|
|
Top Fill
|
Model:
ABA-FILL-TF1PS-M1-EC-5LP
(was ABA.SA.1T.80) |
* Semi-Automatic filling machine shown with pneumatically
controlled auto starting single fill station, continuous
conveyor and lid press
|
-
Pneumatically or PLC Controlled filling
machine.
-
Automatic or Semi-Automatic design.
Semi-Automatic design now incorporates our auto starting
fill stations.
-
Single or Dual Fill Stations.
-
Single Moveable Integrated Platform.
-
Indexing or Continuously Running Conveyor.
-
Optional Lid Press or Lid Crimper
Product Videos available in the information center
|
Model:
ABA-FILL-TF1PAS-M2-EC-1LP-LD-X
(was ABA-AF-2T-80S) |
* Shown with 5 foot rotary table
|
-
Pneumatically controlled filling machine.
-
Swing head design allows the fill heads to
be rotated behind the filing machine, over the filter tub
for easy priming and flushing.
-
Pendant arm control panel swings into
convenient positions for the machine operators.
-
Designed for hazardous areas.
-
Explosion proof rotary table and conveyor.
Video available in the information center
|
Model:
ABA-FILL-TF1EAF-M3-EC-1LP-LD
(was ABA-AF-3T-80-PLC)
|
* Shown with 4 foot rotary table
|
Shown above is a three head machine
with PLC controls and a pendant arm mounted operator touch
screen with lid dropper and roller lid press.
|
Model:
ABA-FILL-TF5EAS-M2-EC-2C
(was ABA-AF-2T-2000S)
|
|
One gallon can through five gallon pail filler with optional
swing heads to allow fill heads to be rotated over the filter
tub for flushing at the completion of the batch fill.
Video available in the information center
|
Model:
ABA-FILL-TF5EAF-M2-EC-2C
(was ABA-AF-2T-2000)
|
|
- Twin Head Volumetric Fill with 5 gallon pumps
- 18 - 20 five gallon pails per minute
- Powered check valves to simplify product feed
requirements
- PLC Controls with operator interface panel
- Accuracy to ¼ of 1% by volume
- Stainless steel conveyor.
- Mobile pump frame for easy maintenance
- Optional lid press or crimper units
|
|
|
Bottom Fill (Diving Probe)
|
Model:
ABA-FILL-BF1ESF-S1
(was ABA-SAF-1T)
|
|
|
-
Designed for filling low viscosity/foaming
products and containers with narrow openings.
-
Can be supplied as semi-automatic (as shown)
and fully automatic machines with conveyors.
-
Modular design allows automation at a later
date.
-
A typical single head machine will fill
about seven gallon containers per minute and three to four
five gallon containers per minute.
-
Diving probes have automatic drip trays for
clean package filling.
|
| product brochures and
information available in the
Information Center
|